When high-pressure performance is critical, few brands rival the engineering of CAT Pumps. But even the most durable equipment eventually shows signs of wear. Whether your CAT pump is losing pressure, leaking oil, or suffering from internal damage, a CAT pump rebuild can restore it to full working condition—saving you money and preventing downtime.

At MultiTorque, we specialize in CAT pump rebuilds for a wide range of industries including mining, agriculture, industrial cleaning, oil & gas, and more. With branches in Brisbane and Perth, our rebuild services are trusted across Australia for speed, reliability, and precision.

What Is a CAT Pump Rebuild?

A CAT pump rebuild goes beyond basic servicing or seal replacement. It involves a complete teardown, inspection, refurbishment, and reassembly of the pump using genuine CAT components. This process restores your pump to “as new” performance at a fraction of the cost of replacement.

Rebuilding is ideal for pumps that:

Have excessive runtime and wear
Are leaking from multiple points
Produce irregular pressure
Have noisy or worn crankshaft assemblies
Are critical to your operations and can’t be replaced quickly

Signs Your CAT Pump Needs a Rebuild

Not sure whether a rebuild is necessary? Watch for these signs:

⚠️ Oil or water leaks from multiple seals
🧯 Erratic or reduced pressure output
🔊 Unusual vibration or noise
🔥 Overheating crankcase
💧 Contaminated pump oil (milky or dark)
🕳 Visible wear on plungers or piston rods

Catching issues early and rebuilding at the right time can add years of life to your CAT pump and protect your overall system from further damage.

What’s Included in a CAT Pump Rebuild by MultiTorque?

At MultiTorque, we don’t just swap out parts—we deliver full, professional-grade CAT pump rebuilds using manufacturer-approved specs and high-precision tools.

Our rebuild process includes:

🔧 1. Full Disassembly & Inspection

We dismantle your CAT pump completely, inspecting each component including:

Crankshaft
Bearings
Connecting rods
Plungers or pistons
Valve assemblies
Seals and O-rings

🧼 2. Ultrasonic Cleaning & Component Restoration

Parts are deep-cleaned, degreased, and checked for micro-cracks or corrosion. Salvageable parts are reconditioned, and any worn or out-of-spec components are replaced.

🛠 3. Replacement with Genuine CAT Parts

We only use OEM CAT parts, including:

Valve kits
Seal kits
Ceramic plungers
Gaskets
Crankcase components
Unloaders and more

⚙️ 4. Reassembly & Precision Calibration

The pump is reassembled with correct torque settings, tolerances, and fluid levels. We test oil levels, verify alignment, and balance the crankshaft.

💡 5. Performance Testing & Certification

Each rebuild includes pressure testing, flow testing, and system calibration to ensure your pump is performing at factory-rated specs.

Why Rebuild Instead of Replace?

💰 Cost Savings: A CAT pump rebuild costs significantly less than a full replacement—especially for high-spec models or integrated systems.

🔁 Extended Life: Rebuilding gives your pump a second life, often adding 3–5+ years of service depending on use and environment.

⚙️ Custom Upgrades: Rebuilds offer the perfect opportunity to upgrade seals, materials, or performance specs to better suit your application.

🌱 Sustainability: Rebuilding reduces waste and supports a circular maintenance economy—ideal for ESG-conscious operations.

CAT Pumps We Rebuild

We handle all common CAT pump models and configurations:

5CP Series – Used in pressure washing and jetting systems
35 Frame Pumps – Found in mining and heavy-duty industrial setups
56 Series – Mid-range, widely used across cleaning and fluid transfer
Stainless Steel & Bronze Pumps – For corrosive or chemical media
Piston & Plunger Variants – Including chemical dosing systems and mobile rigs

We also service diesel engine–driven units, electric pump skids, and trailer-mounted setups.

Industries We Serve

MultiTorque rebuilds CAT pumps for a wide range of industries:

⛏ Mining – Dewatering pumps, washdown systems, high-pressure slurry rigs
🧼 Industrial Cleaning – Jetters, automated washdown lines, tank cleaners
🌾 Agriculture – Fertigation systems, spray rigs, irrigation lines
🛢 Oil & Gas – Remote-site fluid transfer and chemical dosing setups
🔥 Fire Safety – CAT pumps integrated in fire suppression trailers

Whether your unit is in a mobile system or fixed plant setup, we can rebuild it for peak performance.

Our CAT Pump Rebuild Locations & Services

📍 Brisbane & Perth Workshops – Bring your pump to us or ship it from anywhere in Australia
🚚 On-Site Rebuilds – Mobile units available for major repairs on-location
🔧 Fast Turnaround – Minimize downtime with express rebuild options
🧰 Fleet Contracts – Multi-unit rebuild programs for industrial operations

We’re trusted by some of Australia’s biggest industrial and agricultural operations—and we back every rebuild with expert support.

Let Us Build or Rebuild Your Entire System

Need more than just the pump? MultiTorque can integrate your rebuilt CAT pump into:

💼 Skid-based high-pressure systems
🛻 Trailer-mounted washdown or fire suppression units
🏗 Fixed plant systems with control panels and sensors
🔌 Electric or diesel-powered setups with full plumbing

Every component is tested, balanced, and pressure-rated—so it’s ready to go from day one.

Book Your CAT Pump Rebuild with MultiTorque

If your CAT pump is underperforming or showing signs of wear, don’t wait for a full breakdown. Book a CAT pump rebuild today and extend the life of your equipment.

📞 Call MultiTorque on 1300 726 525
🌐 Visit: www.multitorque.com.au to get a quote or schedule your rebuild now.

Also check out our recent rebuild projects and client installs on LinkedIn.

In high-pressure systems, CAT pumps are renowned for their durability and performance. But even the toughest pumps wear over time. Whether it’s a worn seal, pressure loss, or a system fault, CAT pump repair is crucial for keeping your operation flowing without downtime or costly replacements.

At MultiTorque, we specialize in CAT pump repair, parts replacement, and full system servicing across Australia. With workshops in Perth and Brisbane, we provide quick turnarounds, mobile repairs, and expert advice—so you’re never left under pressure.

Why CAT Pumps Fail—and Why You Should Act Fast

CAT pumps are designed for rugged performance. But even the best equipment needs regular servicing and attention. Common causes of CAT pump issues include:

🔧 Seal failure from prolonged high-pressure use
💦 Leaking oil or water due to worn plungers or crankcase damage
🚫 Low pressure output caused by faulty valves or air entrainment
🔥 Overheating from lubrication issues or pump over-speeding
🧪 Corrosion or abrasion from harsh chemicals or abrasive fluid media

Delaying a minor repair can result in full system failure—and that means production downtime, safety risks, and higher long-term costs.

MultiTorque’s CAT Pump Repair Services

At MultiTorque, we offer end-to-end CAT pump repair solutions for clients across mining, agriculture, industrial cleaning, oil & gas, and transport.

Our services include:

✅ Full Diagnostics & Pressure Testing

We run comprehensive system tests to identify pressure drops, fluid bypass, or mechanical issues affecting your CAT pump’s performance.

✅ Seal & Valve Kit Replacements

Using genuine CAT parts, we replace worn seals, O-rings, and check valves to restore peak performance and prevent leaks or contamination.

✅ Ceramic Plunger & Piston Repairs

Worn or cracked ceramic components are a common cause of failure. We inspect, resurface, or replace your plungers to keep pressure consistent.

✅ Crankcase Repairs & Oil Flush

We inspect for shaft play, bearing wear, and oil contamination. We’ll flush and refill with high-grade oil or rebuild the crankcase if needed.

✅ On-Site Repairs & Mobile Support

Can’t get to us? Our technicians come to you with tools, kits, and know-how. We offer mobile repairs across Western Australia and Queensland.

What Makes MultiTorque Different?

We’re not just a parts supplier—we’re a full-service partner. Here’s why Australian industries trust us with their CAT pump repairs:

🛠 15+ years of hands-on experience in pump servicing
⚙️ Genuine CAT components and fast part sourcing
🚛 Custom skid and trailer builds—not just repair work
🧰 In-house and mobile repair teams
📍 Branches in Perth and Brisbane for national coverage
💬 Straightforward advice and long-term support

We’ve built CAT pump systems from the ground up and fixed hundreds more—so we know them inside out.

See what we’re working on via our LinkedIn page.

Common CAT Pump Types We Repair

We service all major CAT pump series, including:

5CP Series – Used in high-pressure washers and jetters
56 Series – Ideal for wash bays, dewatering, and general industrial use
35 Frame Series – Built for high-pressure industrial cleaning and mining
Stainless Steel CAT Pumps – For chemical and corrosive fluid systems
Piston & Plunger Variants – Including custom skid setups

Whether your pump is diesel-driven, electrically powered, or part of a trailer-mounted unit—we’ll diagnose and repair it with precision.

Preventative Maintenance = Long-Term Savings

Regular servicing reduces the likelihood of catastrophic failure and keeps your equipment running longer. Our CAT pump maintenance packages include:

Monthly or quarterly seal inspections
Scheduled valve and plunger service intervals
Oil changes and crankcase flushing
Pressure calibration and flow testing
Fleet-wide health checks for multiple units

Preventative maintenance is cheaper than emergency repair—and way cheaper than total replacement.

CAT Pump Repair for Mining, Agriculture & More

We provide CAT pump servicing for a wide range of Australian sectors:

⛏ Mining

Washdown pump systems
Dust suppression units
Trailer-based dewatering setups

🌾 Agriculture

High-pressure irrigation units
Chemical dosing systems
Fertigation pump repairs

🧼 Industrial Cleaning

Pressure washing systems
Commercial and fleet wash bays
Industrial jetters

🛢 Oil & Gas

Fluid injection and pressure systems
Remote-site pump skid repairs
Hazardous fluid transfer pump servicing

No matter your industry, if you’re using CAT pumps—we’re the repair partner you need.

Need Replacement Parts?

MultiTorque stocks and sources genuine CAT pump components fast:

Seal kits
Plungers
Crankcase oil
Unloaders & pressure regulators
Valve kits
Pump heads and more

Don’t settle for cheap knock-offs. Using genuine parts ensures compatibility, safety, and longevity.

Book Your CAT Pump Repair Now

Don’t wait until it fails. If your CAT pump is underperforming or leaking, call the experts who do more than just bolt parts together—we engineer long-term solutions.

📞 Call MultiTorque today on 1300 726 525
🌐 Or visit www.multitorque.com.au to book a repair, order parts, or request a service callout.

About MultiTorque
MultiTorque is Australia’s trusted name for pump sales, servicing, and custom industrial solutions. With workshops in Perth and Brisbane, we support industries nationwide with expert repair services, parts, and engineered systems tailored to your needs.

When your application calls for serious pressure, industrial-grade reliability, and seamless performance, CAT piston pumps rise to the challenge. These pumps are engineered to handle the most demanding conditions in industries like mining, industrial cleaning, and agriculture, delivering high-pressure power and endurance you can trust.

At MultiTorque, we supply, service, and custom-build CAT piston pump systems for businesses across Australia—tailored to the unique pressures (literally) of your operation.

What Are CAT Piston Pumps?

CAT piston pumps are positive displacement, triplex pumps designed to deliver high-pressure fluid movement with minimal pulsation. The term “piston” refers to the reciprocating piston design that pressurizes fluid during every stroke, ideal for maintaining consistent flow and handling abrasive or chemically aggressive media.

While Cat Pumps also manufacture plunger pumps, their piston series stands out in applications requiring suction lift, low RPM performance, and higher viscosity handling.

Industries That Rely on CAT Piston Pumps

CAT piston pumps are used across a wide range of Australian industries, including:

Mining – For washdowns, pressure boosting, and slurry fluid transfer
Transport & Heavy Vehicle Wash Bays – Ideal for consistent cleaning performance
Agriculture – For pressure irrigation, fertigation, and pesticide delivery
Manufacturing – For pressurized fluid delivery and high-temp chemical handling
Oil & Gas – Used in remote fluid transfer and pressurized filtration systems
Fire Systems – As part of pump-driven chemical suppression units

These are environments where failure is not an option—and CAT piston pumps deliver day in, day out.

Features of CAT Piston Pumps

1. Built to Handle Harsh Fluids

Unlike standard plunger pumps, CAT piston pumps can manage higher-viscosity fluids, solids-laden liquids, and even chemicals, thanks to their robust internal design and flexible seal options.

2. Low-Speed, Long-Life Operation

Because they can run at lower RPMs, piston pumps reduce mechanical wear, generate less heat, and deliver smoother operation—making them perfect for continuous-duty applications.

3. Self-Priming Capabilities

With excellent suction lift and self-priming properties, CAT piston pumps are a top choice for mobile and remote operations where water supply isn’t always pressurized.

4. Corrosion and Abrasion Resistance

CAT’s precision ceramic pistons and stainless steel construction offer long service life even in corrosive or abrasive conditions, such as bore water, slurry, or chemical agents.

MultiTorque: Your CAT Piston Pump Specialists

At MultiTorque, we don’t just supply CAT piston pumps—we engineer full pump systems, mobile solutions, and service packages designed for long-term reliability in Australian conditions.

We offer:

🛠 Sales and sourcing of genuine CAT piston pumps
🧰 Custom trailer or skid-mounted pump systems
🔄 Servicing and overhaul of existing CAT pump setups
⚙️ Pump selection consulting and integration support
🔧 Spare parts and seal kits delivered fast across Australia

Need something mobile, extreme-duty, or totally custom? Our fabrication team can build it from the ground up.

CAT Piston Pump Models Available

Popular CAT piston pump models include:

Model 1530 Series – Ideal for medium-duty high-pressure systems
Model 3507 Piston Pump – A workhorse for demanding mine and washdown systems
Custom configurations – CAT pumps mated to diesel engines, electric motors, or hydraulic drives

Each model can be customized with your choice of seals, valves, and control systems to meet exact site specs.

Build Custom CAT Pump Skids or Trailers with MultiTorque

Looking for more than just the pump?

We offer complete build options including:

✅ Skid-mounted high-pressure washdown units
✅ Diesel-driven pump trailers for remote dewatering
✅ Chemical dosing pump systems for plant safety
✅ Full control panel and VFD integration
✅ Hard-plumbed or flexible hosing systems

Let us turn your CAT piston pump into a fully functioning solution, pre-tested and site-ready.

You can view some of our CAT builds and updates on LinkedIn.

Servicing and Support for CAT Piston Pumps

Every high-performance pump needs occasional TLC—and we’ve got that covered.

Our service offering includes:

✔ Seal and valve kit replacements
✔ Ceramic piston inspections and replacements
✔ Oil flush and crankcase maintenance
✔ System pressure testing and fault diagnosis
✔ Custom servicing contracts and on-site repairs

With workshops in Perth and Brisbane, and mobile technicians on call, MultiTorque offers the fastest CAT pump turnaround time in the game.

Why Choose MultiTorque?

15+ years of pump experience in Australia’s toughest industries
Nationwide parts supply and fast local repairs
End-to-end project support from selection to commissioning
Custom solutions for extreme pressure or unique applications
Trusted by mining, agriculture, and OEM partners across the country

We’re the CAT pump partner that keeps your operation flowing without a hitch.

Get a Quote for a CAT Piston Pump System

Whether you’re replacing a worn-out pump, upgrading your wash bay, or speccing out a new mobile unit, MultiTorque can help you design the perfect CAT piston pump setup.

📞 Call us now on 1300 726 525
🌐 Or visit www.multitorque.com.au to request a quote or learn more.

About MultiTorque
MultiTorque is a leading Australian provider of pump systems, repairs, and custom industrial solutions. With over 15 years of experience and a reputation for reliability, we specialize in CAT pumps, OEM pump builds, mobile units, and complete engineered solutions.

When pressure matters, and failure isn’t an option, industries across the globe turn to CAT pumps. Known for their precision engineering, long service life, and adaptability, CAT pumps have become a staple in high-demand industries such as mining, industrial cleaning, agriculture, and oil & gas.

At MultiTorque, we supply and service a wide range of CAT pumps across Australia. With expert support, custom builds, and rapid repair services, we help businesses keep their operations running at peak performance.

What Is a CAT Pump?

A CAT pump is a high-pressure triplex positive displacement plunger pump, manufactured by Cat Pumps, a globally respected U.S.-based company. These pumps are designed to deliver consistent high-pressure fluid flow with minimal pulsation, making them ideal for tough, continuous-duty applications.

Whether mounted on skids, trailers, or part of industrial systems, CAT pumps offer unmatched reliability and flexibility. Their modular design and robust construction mean they thrive under demanding conditions, especially where other pumps may falter.

Where Are CAT Pumps Used?

CAT pumps are the preferred choice in a wide range of Australian industries, including:

🏗 Mining – For washdown systems, dust suppression, and slurry management
🧼 Industrial Cleaning – In jetting systems, high-pressure washers, and automated cleaning solutions
🚛 Transport – In vehicle wash bays and fuel/oil system flushing
🛢 Oil & Gas – For chemical injection and high-pressure transfer systems
🚜 Agriculture – Used in irrigation, pesticide spraying, and fertigation systems
🧯 Fire Protection – Supporting water mist and dry chemical fire suppression units

These applications require reliable, high-performing pumps—and that’s where CAT pumps shine.

Advantages of Using CAT Pumps

1. Durability

CAT pumps are built to withstand heavy loads, harsh fluids, and high operating pressures. With ceramic plungers, stainless steel components, and field-proven seal technology, they keep going where other pumps give out.

2. Consistent Flow

With a triplex plunger system, CAT pumps reduce pulsation, delivering a smooth and continuous flow. This improves system performance and reduces stress on connected equipment.

3. Easy Maintenance

Thanks to their modular build and easily replaceable parts, CAT pumps are simple to service. Whether you’re doing a seal kit replacement or a plunger swap, it’s straightforward and cost-effective.

4. Flexible Integration

CAT pumps can be driven by electric motors, petrol/diesel engines, or hydraulic power packs. They’re commonly installed on pump skids, trailers, and fixed plant systems—all of which MultiTorque can build for you.

CAT Pump Models Available at MultiTorque

MultiTorque sources and services a wide range of CAT pump models. Some of the most requested series include:

5CP Series – Compact and ideal for high-pressure cleaning
56 Series – Designed for mid-range flow and pressure applications
35 Frame Series – Built for extreme pressures, up to 7000 PSI
Stainless Steel & Nickel Aluminium Bronze Pumps – Perfect for corrosive fluids and harsh chemicals

No matter your application, our team can match the right CAT pump to your needs.

Custom CAT Pump Systems by MultiTorque

Need a complete system, not just the pump? We’ve got you covered. At MultiTorque, we design and build CAT pump systems tailored to your application.

Our custom systems include:

⚙️ Electric or diesel drive pump skids
🛻 Trailer-mounted mobile washdown or dewatering units
📦 Compact pump enclosures for remote locations
💡 Control panels, flow meters, valves, and pressure relief systems

Whether you need a skid for a mine site or a portable CAT pump unit for rural fire suppression, we deliver plug-and-play solutions built tough for Australia.

Why Choose MultiTorque?

✅ Industry Experience – With over 15 years in the pump game, we know what works and what doesn’t.
✅ Servicing & Repairs – Our Perth and Brisbane workshops are equipped for CAT pump repairs, seal changes, diagnostics, and full overhauls.
✅ Fast Turnaround – We stock common CAT pump models and parts, so you’re not stuck waiting weeks for freight.
✅ Custom Builds – From frame to function, we can build to your exact spec and deliver it tested and ready.

We’re not just a supplier—we’re a partner. Check out our latest builds, behind-the-scenes installs, and project updates on LinkedIn.

CAT Pump Servicing & Repairs

Even the toughest pump needs TLC. MultiTorque offers full servicing for CAT pumps, including:

✅ Seal & valve replacements
✅ Plunger servicing and ceramic upgrades
✅ Oil changes and crankcase inspections
✅ Pressure testing and flow calibration

We offer scheduled maintenance, emergency repairs, and fleet-wide service contracts. Whether your pump is on a trailer, in a processing plant, or part of a mobile wash bay, we can get it running like new.

How to Order or Get a Quote

Ready to upgrade your system or integrate a CAT pump into your operations? Contact MultiTorque for expert advice, competitive pricing, and fast delivery.

📞 Call MultiTorque on 1300 726 525
🌐 Visit: www.multitorque.com.au

Our team is here to help you choose the best CAT pump for your needs and provide a long-term solution—not just a quick fix.

Final Thoughts: Why CAT Pumps Are a Smart Investment

A CAT pump isn’t just a component—it’s a long-term investment in performance, uptime, and reliability. When you choose a CAT pump and partner with MultiTorque, you get:

Precision-built engineering
Local expertise and support
Custom integration options
Long-term reliability in extreme environments

From pressure washing systems to mine dewatering solutions, CAT pumps deliver—and MultiTorque ensures they’re always at their best.

When it comes to industrial, mining, or high-pressure cleaning applications, CAT high pressure pumps are widely recognised as a global benchmark for performance and reliability. Known for their rugged durability and engineering precision, CAT pumps can handle some of the toughest fluid transfer jobs on Earth.

At MultiTorque, we supply and support CAT high pressure pumps across Australia—backed by expert servicing, repairs, and custom skid builds tailored for local conditions.

What Is a CAT High Pressure Pump?

A CAT high pressure pump is a positive displacement plunger pump, designed for continuous-duty applications in industries that demand sustained pressure, consistent flow, and long operating life. These pumps are made by Cat Pumps, a globally respected manufacturer headquartered in the United States.

CAT pumps are capable of operating at pressures up to 7000 PSI (483 bar) and flow rates beyond 280 L/min, making them ideal for demanding environments.

Industries Using CAT High Pressure Pumps

Thanks to their extreme reliability, CAT pumps are used across a wide range of industries, including:

🏗 Mining – For washdowns, dust suppression, and fluid injection
🧼 Industrial Cleaning – High-pressure cleaning systems and jetters
🚛 Transport & Heavy Machinery – Pressure systems for wash bays
🔥 Fire Suppression – In pump-driven fire protection systems
🛢 Oil & Gas – Used for chemical injection and high-pressure transfer
🚜 Agriculture – For fertigation, irrigation, and high-pressure spraying

These pumps are often installed in trailers, pump skids, or fixed plants where high volume, high pressure, and non-stop operation are standard.

Key Features of CAT High Pressure Pumps

1. Long Service Life

CAT pumps are designed with triplex plunger technology, which delivers a smooth, low-pulsation flow that reduces wear and extends lifespan.

2. Corrosion-Resistant Components

Many models feature stainless steel or ceramic plungers and seals built to withstand harsh chemicals and abrasive fluids—perfect for Australia’s mining and industrial sectors.

3. Modular Design

The compact and modular design of CAT pumps makes them ideal for skid-mounted systems or custom trailer builds. They’re also easy to maintain, with accessible service points.

4. Consistent Performance

Even under continuous high-pressure loads, CAT pumps maintain a consistent flow rate and pressure output, which is critical for washdown bays, dust control, and production line reliability.

MultiTorque: Your CAT High Pressure Pump Partner

At MultiTorque, we’ve been supplying, servicing, and integrating CAT high pressure pumps into real-world systems across Australia for over 15 years. With workshops in Perth and Brisbane, our technicians can handle repairs, part replacements, and full pump system installations.

We also build:

🔧 Custom pump skids
🛻 Mobile trailer-mounted pump units
⚙️ Engine-driven and electric drive pump setups
🧰 Turnkey solutions for mining, agriculture, and industry

If you’ve got a challenging project or extreme working environment, we can engineer a CAT high pressure pump system that’ll thrive in it.

CAT Pump Models Available

Some of the popular CAT high pressure pump models we source and service include:

Model 5CP Series – Compact and ideal for high-pressure cleaning systems
Model 56 Series – Heavy-duty industrial applications with higher flow
Model 35 Frame Plunger Pumps – Extreme high-pressure output up to 7000 PSI
Stainless Steel Series – Designed for corrosive fluid environments

Need a recommendation? We’ll match the best CAT pump to your pressure, flow, and chemical compatibility needs.

Why Choose MultiTorque for CAT Pumps?

✔ Australian Expertise – We understand local conditions, from mine sites to rural properties.
✔ Fast Parts & Repairs – We keep stock and can source genuine CAT pump parts quickly.
✔ End-to-End Support – From sourcing the pump to building the system and maintaining it long-term.
✔ Custom Fabrication – Skid frames, trailers, control systems—you name it, we build it.
✔ Trusted by Industry – Our reputation is built on real results and long-term client partnerships.

You can see our latest CAT pump setups, trailer builds, and pump repairs on our LinkedIn page.

Custom CAT Pump Skid Systems

We offer complete pump skid systems featuring:

CAT high pressure pump (matched to spec)
Electric motor or diesel engine drive
Steel base frame or mobile trailer
VFDs and pressure switches
Piping, valves, and gauges

These are ideal for:

Permanent installations in processing facilities
Mobile dewatering and washdown units
Chemical injection systems
Fire suppression backup units

We build to your spec—or help you develop one.

Servicing & Repairs for CAT High Pressure Pumps

Regular servicing is key to keeping your CAT pump running strong. We offer:

Seal and valve replacements
Oil changes and crankcase inspections
Ceramic plunger replacements
Pressure testing and fault diagnostics

Our experienced techs will keep your pump in top shape and advise on any preventative maintenance to avoid costly downtime.

Get a CAT High Pressure Pump Quote

Looking to buy or build with a CAT high pressure pump? Whether you need a standalone unit or a fully integrated trailer system, we’ve got you covered.

📞 Call MultiTorque on 1300 726 525
🌐 Or visit: www.multitorque.com.au

About MultiTorque
MultiTorque is Australia’s trusted supplier and service provider for industrial pump systems, including CAT high pressure pumps. With a reputation for reliability and engineering excellence, we serve mining, agriculture, oil & gas, manufacturing, and more.

In industries where pressure and precision go hand in hand, OEM high pressure pumps stand as a critical component of efficient operations. Whether it’s mining, manufacturing, agriculture, or heavy transport, these pumps play a vital role in keeping systems running smoothly. For companies across Australia, sourcing a reliable OEM high pressure pump means increased uptime, performance, and peace of mind.

At MultiTorque, we understand the demanding nature of high-pressure environments and the importance of engineered OEM solutions designed to meet your exact needs.

What Is an OEM High Pressure Pump?

An OEM (Original Equipment Manufacturer) high pressure pump is a specialized pump built to the exact specifications required by the original equipment. Unlike off-the-shelf or aftermarket pumps, OEM pumps are designed for perfect compatibility and performance with the equipment they’re made for.

This tailored engineering ensures superior efficiency, safety, and longevity—especially in high-demand applications like mine dewatering, fluid transfer, or chemical dosing.

Why Choose OEM Over Generic?

1. Precision Engineering

OEM pumps are engineered specifically for the machine or system they’re installed in. That means the internal tolerances, flow rates, materials, and pressure capacities are exactly right for the job. In high-pressure scenarios, this isn’t just a benefit—it’s essential.

2. Reduced Downtime

Because OEM high pressure pumps are built for their equipment, they are less likely to fail due to incompatibility or sub-par performance. This translates into less unplanned downtime, lower maintenance costs, and smoother operations.

3. Warranty Compliance and Safety

In many industrial systems, using non-OEM parts can void warranties. OEM pumps also meet the safety standards required by equipment manufacturers, reducing your exposure to compliance risks.

Industrial Applications of OEM High Pressure Pumps

High pressure pumps are used across various industries in Australia, especially where robust, continuous-duty operations are the norm.

Industries include:

Mining & Dewatering: For moving high volumes of water and slurry under pressure.
Agriculture: In irrigation systems, fertigation, and high-volume fluid transfer.
Oil & Gas: For transferring hydrocarbons and pressurized fluids.
Manufacturing: Used in cooling systems, presses, or cutting systems.
Fire Suppression: High pressure pumps are used in chemical dosing and suppression delivery systems.

If you’re working in any of these sectors and need a high-pressure solution, an OEM pump tailored to your system is the smartest route.

Features of MultiTorque’s OEM High Pressure Pump Solutions

At MultiTorque, we offer a range of OEM pump solutions for high-pressure applications. Here’s what sets us apart:

✅ Custom Configurations: Whether you need a trailer-mounted pump unit or a compact skid-based system, we build to spec.
✅ Premium Components: We use trusted brands and components known for performance and reliability.
✅ Local Support: With branches in Perth and Brisbane, you get fast service and technical support when you need it.
✅ Fast Turnaround: Our workshop is geared for quick deployment, servicing, and repairs.

We’ve been supporting Australia’s industries for over 15 years, with a strong focus on long-term partnerships and engineered results.

Common OEM Pump Types Supplied

MultiTorque supplies and services a wide range of OEM-style high pressure pumps, including:

Centrifugal Pumps (for high-flow systems)
Diaphragm Pumps (for chemical and abrasive fluid handling)
Piston and Plunger Pumps (for ultra-high-pressure needs)
Progressive Cavity Pumps (ideal for viscous media)

Whether you’re replacing an existing system or designing a new one, we can source or build the right high-pressure solution.

Servicing & Custom Pump Builds

MultiTorque doesn’t just supply pumps—we also service and repair them. Whether it’s an OEM Wilden, Napco, or NOV pump, we’ve got the skills and parts to get you back up and running fast.

Need something outside the box? We also custom-build trailer-based pump systems and control units designed specifically for harsh environments like quarries, mines, and remote installations.

You can check out some of our custom builds and updates on our LinkedIn page.

Why OEM Pumps Are a Better Investment

While OEM high pressure pumps may seem more expensive upfront, they deliver far better ROI over time. You save on:

Replacement costs (they last longer)
Downtime (they work reliably)
Energy (they operate more efficiently)
Maintenance (they’re easier to service with original specs)

The net result? A smoother operation and stronger bottom line.

Get a Quote or Custom Solution

If you’re ready to upgrade your high-pressure systems or want to explore tailored OEM pump solutions, we’re here to help. Our team can advise on the best pump for your application or build one from scratch to meet your system needs.

📞 Call MultiTorque today on 1300 726 525 or visit our website to explore OEM high pressure pumps and more.

👉 www.multitorque.com.au

About MultiTorque
MultiTorque is Australia’s go-to partner for pump solutions, custom engineering, and reliable servicing across mining, agriculture, oil & gas, and manufacturing. We offer high-quality products and tailored solutions with workshop facilities in Perth and Brisbane.

Mining is one of the most demanding industries in the world, and water is one of its biggest challenges. Whether it’s groundwater infiltration or rainfall accumulation, excess water in a mine can threaten safety, stall production, and damage equipment. That’s where mine dewatering pumps come into play — removing water quickly, efficiently, and reliably.

At MultiTorque, we supply, service, and support a full range of mine dewatering pumps built to withstand Australia’s harshest conditions. From custom mobile trailers to high-performance submersible systems, our solutions keep your operations dry, safe, and on schedule.

Why Mine Dewatering Pumps Are Critical

Water in a mine isn’t just inconvenient — it’s dangerous. It causes:

Delays in excavation and drilling
Increased wear and corrosion on equipment
Slope failures or pit wall collapse
Health and safety hazards for personnel

Mine dewatering pumps are designed to remove water from active mining areas, haul roads, and underground tunnels. These pumps protect infrastructure, maintain productivity, and support compliance with environmental and safety regulations.

Types of Mine Dewatering Pumps

MultiTorque supplies and supports several major types of mine dewatering pumps, depending on site-specific needs:

1. Centrifugal Dewatering Pumps

These are ideal for surface mines where high flow rates are needed. They handle large volumes of water quickly and are commonly skid-mounted or trailer-mounted for mobility.

2. Submersible Pumps

Used in underground mines and pit bottoms, submersible mine dewatering pumps operate below the water line. They’re compact, efficient, and built to withstand abrasive and corrosive materials.

3. Positive Displacement Pumps

Great for high-head applications or when water is mixed with slurry, chemicals, or other viscous materials. These pumps offer precise control and excellent reliability.

4. Custom Dewatering Units

Need a fully mobile, towable trailer system? MultiTorque builds custom dewatering pump trailers to meet your specific site and transport requirements — engineered in-house with Australian conditions in mind.

Custom Solutions for Australian Mining

Not all mine dewatering pumps are created equal. At MultiTorque, we don’t believe in one-size-fits-all. We provide tailored solutions that address your mine’s layout, depth, water type, and operating hours.

We specialise in:

Mobile dewatering trailers for rapid deployment across large sites
Diesel or electric-powered options for off-grid or connected locations
Auto-prime capabilities for intermittent flow sites
Corrosion-resistant materials for handling brine, slurry, or acidic water
Remote monitoring upgrades to improve control and efficiency

Our goal is to maximise uptime and minimise manual intervention.

Trusted Brands. Local Service.

We supply and support mine dewatering pumps from leading manufacturers including:

Wilden
NOV
Napco
Orbit
And more, depending on your spec and site conditions

With branches in Perth and Brisbane, we service clients across Australia. Our field technicians are fully equipped to perform on-site repairs, emergency pump swaps, and regular maintenance.

Need pump repairs or a new dewatering system design? We’ve got you covered — check out our services here:
👉 www.multitorque.com.au

Case Study: Dewatering at a Queensland Open-Cut Mine

Recently, MultiTorque was called in to support a large open-cut coal mine in Queensland facing flooding after a series of heavy rains. Our team delivered:

Two high-capacity centrifugal pump trailers
On-site installation and commissioning within 48 hours
Ongoing maintenance and performance monitoring

The result? Zero downtime, full operational recovery in 3 days, and the mine now uses MultiTorque for all future pump servicing.

The MultiTorque Advantage

Here’s why mining operations across Australia trust us for their mine dewatering pumps:

✅ Custom-Built Systems – From trailer units to permanent pump stations
✅ Full Support – Design, supply, install, repair, and maintain
✅ Proven Brands – Wilden, NOV, Napco, Orbit, and more
✅ Fast Turnaround – We respond fast and act faster
✅ Nationwide Reach – With Perth and Brisbane hubs

We’ve been in the pump game for over 15 years and have built long-term relationships with mine operators across Australia’s harshest regions.

Maintenance Matters

Even the best mine dewatering pumps require routine care. We offer:

Scheduled maintenance programs
Spare parts supply
On-site diagnostics
Rapid-response breakdown support

Proactive service keeps your operation flowing smoothly and avoids costly downtime.

Let’s Talk Mine Dewatering

Whether you’re building a new site, expanding operations, or simply replacing old gear, MultiTorque has the experience and solutions to deliver results. Our team can assess your current setup and recommend the most efficient, durable system for your mine.

💬 Call to Action

Don’t let water bring your mining operation to a halt. Get the right mine dewatering pumps from a team that knows the terrain.

📞 Call MultiTorque on 1300 726 525
🌐 Visit: www.multitorque.com.au
📧 Email: sales@multitorque.com

https://www.linkedin.com/company/3176927

When operations demand force, speed, and durability, high pressure pumps are the backbone of performance. Whether you’re managing a mining dewatering system, blasting fluid across a construction site, or dosing chemicals with precision, high pressure pumping systems are essential for getting the job done right.

At MultiTorque, we understand the importance of pressure-rated performance. As one of Australia’s leading pump suppliers and service providers, we offer industry-specific, custom-built high pressure pump solutions tailored to your needs. Backed by over 15 years of hands-on experience, we deliver the power and reliability that Australian industry demands.

What Are High Pressure Pumps?

High pressure pumps are designed to move fluids under extreme pressure conditions, making them ideal for heavy-duty industrial, mining, and civil applications. Unlike standard pumps, they are built with enhanced materials, reinforced seals, and advanced hydraulics to handle more demanding tasks.

High pressure pumps are commonly used for:

Mining dewatering and underground water removal
Hydraulic power units
Pressure cleaning and jetting systems
Irrigation in rugged terrain
Chemical injection in water treatment or process plants
Oil and gas transfer operations

Our Pump Solutions at MultiTorque

We offer a wide range of high pressure pump types, including:

Centrifugal pumps for large-scale flow systems
Positive displacement pumps for high-viscosity fluids or precise dosing
Diaphragm pumps for corrosive and abrasive applications
Piston pumps for ultra-high-pressure performance in compact builds

Each system is tailored to meet site-specific conditions, including temperature, fluid type, flow rate, and required pressure.

Built to Handle Australia’s Harshest Conditions

Australian industries operate in some of the world’s toughest environments—from dust-choked mine sites to remote farms and outback water treatment facilities. MultiTorque’s high pressure pump systems are engineered with rugged durability in mind.

Custom Fabrication: We build skid-mounted, trailer-mounted, and standalone units from the ground up in our Perth and Brisbane workshops.
Premium Brands: We work with world-class manufacturers including Wilden, NOV, Napco, and Orbit.
Mobile Capability: Our mobile service team can travel to your site for repairs, installations, or troubleshooting.
Quick Turnaround: We prioritise uptime and rapid deployment of replacement or upgrade units.

Why Choose MultiTorque?

What sets us apart from other high pressure pump suppliers is our total solution approach. We don’t just sell pumps — we engineer entire systems.

✅ End-to-End Support
From selection to commissioning, our experienced technicians handle every step.

✅ Preventative Maintenance
We offer scheduled servicing and diagnostics to prevent downtime.

✅ Spare Parts Supply
We maintain stock for most major pump brands to reduce delays.

✅ Emergency Breakdown Support
When your high pressure pump fails, we’re ready to get you back online fast.

Industries We Serve

MultiTorque supplies and services high pressure pumps across a broad range of industries:

Mining & Resources
Water & Wastewater Treatment
Civil & Construction
Oil & Gas
Agriculture & Irrigation
Food & Beverage (including wineries)

Get the Right High Pressure Pump System

Whether you need a compact unit for precise dosing or a heavy-duty pump for large-volume slurry handling, MultiTorque will design, supply, and support your system from start to finish.

🔧 Need a custom skid?
🛠 Got a breakdown?
📦 Looking for a reliable pump supplier?

We’re here to help.

📞 Contact MultiTorque Today

Ready to power up your operations? Contact MultiTorque to get expert advice or request a custom quote.

👉 Visit www.multitorque.com.au
📞 Call us on 1300 726 525
📧 Email: sales@multitorque.com

When water management is critical to the success and safety of your project, you need equipment that’s fast, reliable, and built to move. At MultiTorque, we specialise in mobile dewatering units designed for demanding applications across Australia — from remote mining operations to infrastructure projects, construction sites, and emergency response.

Whether you need groundwater removal, tailings dam dewatering, or stormwater control, our trailer-mounted systems offer the flexibility and performance to get the job done right.

What Are Mobile Dewatering Units?

Mobile dewatering units are self-contained pump systems designed to remove unwanted water from a site. Typically mounted on trailers or skids, these systems include:

A high-performance pump (diesel or electric)
Fuel and control systems
Discharge piping or hose reels
Optional automation (e.g. float switches, timers)
Trailer chassis for off-road and site mobility

They are designed for fast deployment, efficient operation, and ease of relocation — making them ideal for projects where conditions change quickly or where permanent installations aren’t viable.

Applications for Mobile Dewatering Units

MultiTorque’s mobile dewatering units are trusted in multiple industries:

🟢 Mining

Groundwater inflow in open-cut pits or underground mines can delay operations, increase risks, and damage equipment. Our units manage:

Pit dewatering
Tailings dam water control
Emergency water removal after heavy rain

🟦 Construction & Civil Projects

Water accumulation on-site can stall progress. Our systems support:

Excavation and foundation dewatering
Stormwater management
Roadwork drainage

🟡 Quarries & Sand Pits

Efficient dewatering helps control moisture levels in material stockpiles and excavation zones.

🟠 Emergency Response

Rapid-response units for flood recovery, dam overflows, and wastewater surges.

Why Choose MultiTorque’s Mobile Dewatering Units?

We don’t just supply pumps — we engineer complete mobile dewatering systems from the ground up, designed specifically for Australian conditions.

✔️ Built for Harsh Environments

Our trailers and pump assemblies are fabricated to handle heat, dust, vibration, and terrain across remote QLD, WA, and beyond.

✔️ Diesel & Electric Drive Options

Whether you’re off-grid or site-powered, we build for flexibility. Diesel units include onboard fuel tanks and battery start, while electric units can be VFD-compatible for flow control.

✔️ Custom Configuration

From pump type to hose kit length, every unit is tailored to your project. Need automated start/stop? Flow sensors? Bunding? No problem.

✔️ Fully Mobile

4×4-compatible trailers and forklift-compatible skids ensure smooth site logistics. Easy to tow, drop, and activate.

✔️ Backed by Service

With branches in Brisbane and Perth, MultiTorque supports your operation before, during, and after deployment. We offer servicing, spare parts, and upgrades for all units — even if we didn’t build them.

Introducing BoreBoss: Our Flagship Mobile Dewatering Unit

🚨 New release: Our latest innovation, the BoreBoss, is a rugged trailer-mounted dewatering unit engineered for boreholes, pits, and sumps in remote environments.

Key features:

Heavy-duty diesel centrifugal pump
6″ suction with layflat hose kit
Auto float switch for hands-free start/stop
Bunded trailer with toolboxes and hose reels
Fully assembled, tested, and site-ready

🔗 Check out the BoreBoss on YouTube
🔗 Learn more on our website

Custom Pump Configurations Available

We offer a wide range of pump types depending on your application:

Centrifugal Pumps – High flow, ideal for groundwater
Diaphragm Pumps – Handles slurry or solids-laden fluids
Progressive Cavity Pumps – Precision flow for sludge or chemical dosing
Submersible Pumps – Drop-in solution for deep pits or tight spaces

Each mobile unit can be fabricated to your exact spec — including twin-pump redundancy, remote telemetry, or solar-battery hybrids.

Recent Project: Coal Mine Dewatering – Central QLD

A coal operation in Central Queensland faced rising groundwater inflow, causing delays and safety risks. MultiTorque delivered:

Two trailer-mounted diesel dewatering units
Custom pipework with quick-connect fittings
Float switch automation
On-site training and commissioning

Result: 24/7 hands-off dewatering with zero failures over 6 months. Client has since ordered four more units for satellite operations.

Maintenance and Servicing

Mobile dewatering units are often exposed to rough environments, so proactive maintenance is critical. MultiTorque offers:

On-site or workshop servicing
Impeller and seal replacements
Diesel engine tune-ups
Hose replacements and upgrades
Control panel testing

Need a spare part? Our team stocks components for Wilden, NOV, Napco, Orbit, and more. Contact sales@multitorque.com or call 1300 726 525.

How to Choose the Right Mobile Dewatering Unit

Before choosing a dewatering unit, consider:

Flow rate and total head – How much water do you need to move, and how far?
Solids content – Are you pumping slurry, silt, or clean water?
Power availability – Diesel or electric?
Site access – Can trailers or skids reach the location?
Automation needs – Do you need float switches or timed activation?

We’ll work with your team to spec out the ideal solution, with lead times and delivery suited to your project schedule.

Get Started With MultiTorque

If you’re looking for rugged, reliable, and fully mobile dewatering systems that can go wherever the work is, MultiTorque is ready to deliver. From custom builds to rapid deployment, we’ve got the gear and the team to make it happen.

📞 Call us now on 1300 726 525
📧 Email: sales@multitorque.com
🌐 Visit: www.multitorque.com.au

https://www.linkedin.com/company/3176927

When you need to move abrasive, solid-laden materials reliably—whether in mining, dredging, or wastewater treatment—a slurry pump system is essential. At MultiTorque, we specialise in delivering rugged, custom-designed slurry pump systems built for Australia’s most demanding environments.

🔧 What Is a Slurry Pump System?

A slurry pump system typically includes a heavy-duty centrifugal or positive-displacement pump, skid-mounted or trailer-mounted, equipped with wear-resistant impellers, liners, controls, and piping. These systems are designed to handle high-solids content with minimal downtime—unlike standard pumps, slurry pumps are forged for durability under extreme conditions

⛏️ Why Correctly Specifying Matters

A poorly specified system leads to high energy use, frequent wear, and costly breakdowns. Australian mines commonly use slurry pumps around the clock, demanding precision in pump selection to match best efficiency point (BEP) performance miningmagazine.com.au. Ensuring optimal BEP lowers long-term costs and extends component life.

🛠️ System Configurations: What to Choose

1. Centrifugal Slurry Pumps

Optimal for high-flow operations, these are available in horizontal, vertical, and submersible designs. Submersible types offer cleaner installations and quiet operation

2. Positive-Displacement and Progressive-Cavity Pumps

Better suited for high-viscosity or precision dosing jobs, these are ideal for chemical or oil-laden slurries—they’re dependable and accurate

3. Chopper & Rotary-Lobe Pumps

When solids cause clogs, chopper pumps macerate the slurry to prevent blockages, while rotary-lobe pumps offer low-shear handling in food or wastewater applications

🌍 Applications We Serve

Mining & Quarrying – For tailings, mill discharge, and heavy grit, slurry pump systems are indispensable. High chrome impellers and chromium steel liners resist abrasive damage .

Dredging & Water Management – Slurry pumps help dredge ponds and remove sediments, efficiently managing water-based mining and industrial cleaning .

Wastewater & Agriculture – Sludge, manure, or biosolids? With chopper or submersible designs, these systems reduce downtime and improve operational consistency .

🏆 Real‑World Success Stories

Mining Magazine Australia reported that optimally specified slurry pumps can vastly cut operating costs while boosting reliability—achieved by aligning pump performance with site conditions esitechgroup.com+12miningmagazine.com.au+12metso.com+12.
Weir Minerals/Warman MCR 250 saw a 130% increase in wear life and annual savings of US $70,000 at a gold mine, thanks to proper pump selection and pump box level control global.weir.
ESI Technologies replaced a failing centrifugal slurry pump with a Goulds XHD unit, extending wear part life from 8–10 weeks to over 35 weeks—a 5× improvement esitechgroup.com.
Sulzer SNS pump proved more efficient in mine dewatering compared to standard slurry pumps, saving EUR 24,000 per year in energy per unit sulzer.com.

🧩 MultiTorque’s Approach to Slurry Pump Systems

At MultiTorque, we don’t just install pumps—we provide fully engineered slurry pump solutions:

✔️ Custom Engineering & Fabrication

Whether you need horizontal, vertical, submersible, or skid-mounted systems, we tailor each solution. We integrate control panels, telemetry, variable-frequency drives, and chemical-resistant materials for rugged performance.

✔️ Proper Specification

We examine slurry composition, flow needs, head pressure, and solids content to specify the ideal pump type, material, and power source—optimised around BEP.

✔️ Service & Ongoing Support

We offer regular maintenance, wear-part swapping, rebuilds, and diagnostics. From our Brisbane and Perth branches, we support clients nationwide.

✔️ Trial, Test, Iterate

Using intelligence from customers and local conditions, we support ongoing optimisation—like pump box level control and predictive wear analysis.

⚙️ Maintenance Best Practices

Regular inspection and performance checks are vital:

Replacing liners and impellers before performance drops
Monitoring vibration, flow, pressure anomalies
Keeping spares on-site for rapid swaps
Scheduling rebuilds to prevent unexpected outages vogelsang.info+15razor-labs.com+15multitorque.com.au+15 multitorque.com.au global.weir cedronmagazine.com+2esitechgroup.com+2multitorque.com.au+2

🌟 Benefits of Partnering with MultiTorque

Lower operational costs through energy-efficient, well-specified systems
Reduced maintenance downtime with wear-resistant pump components
Higher uptime via custom systems built for reliability
Australia-wide support plus local technical expertise

📞 Get Your Slurry Pump System Right

If you’re ready to upgrade or install a slurry pump system, MultiTorque can guide you—end to end. From design and build to maintenance and optimisation, we ensure your operation stays running.

🔗 Learn more about our slurry pump capabilities here:
Why Mine Slurry Pumps Are Essential multitorque.com.au

📞 Call 1300 726 525
📧 Email: sales@multitorque.com
🌐 Visit: www.multitorque.com.au

Newer Posts

Older Posts