When you’re dealing with high water tables or deep excavation sites, basic drainage systems just don’t cut it. For large-scale projects like mine pits, building foundations, tunnels, or quarries, the safest and most efficient solution is deep well dewatering.

At MultiTorque, we supply and support custom-engineered deep well dewatering systems built to perform in the toughest Australian conditions. Whether you’re working in hard rock, soft clay, or sandy soil, our solutions are designed for maximum flow, reliability, and compliance.

Table of Contents

What Is Deep Well Dewatering?

Deep well dewatering is a method used to lower groundwater levels by installing a series of vertical wells equipped with electric submersible pumps. These wells remove water from below the excavation depth, allowing dry and stable working conditions for construction, mining, and infrastructure development.

Unlike surface or sump pumps, deep well systems handle high volumes over extended periods with minimal maintenance and maximum control.

Where Is Deep Well Dewatering Used?

Deep well dewatering is commonly applied in:

Open-cut mining operations
Large-scale building foundations
Tunnel construction projects
Rail and road infrastructure
Basement excavation in high water table areas
Flood remediation in industrial zones

If your site has a risk of inflow from groundwater under pressure or deep water layers, this method is one of the most effective and sustainable ways to keep the area dry and compliant.

Components of a Deep Well Dewatering System

A complete deep well dewatering setup typically includes:

Vertical boreholes drilled around the site perimeter
Electric submersible borehole pumps with sufficient lift capacity
Risers and discharge pipes to transport water away from the site
Control panels and level sensors for automation
Power supply systems, including backup generators if required

At MultiTorque, we supply and configure every component for plug-and-play performance, ensuring your system is matched precisely to site requirements.

Why Choose MultiTorque for Deep Well Dewatering?

1. Tailored Systems
We design and build dewatering systems to suit your site’s geology, depth, flow rate, and operational constraints. Whether you need 2 wells or 20, we’ve got the expertise and gear.

2. Quality Components
We work with trusted brands like Napco, Orbit, Wilden, and NOV to supply pumps and control systems that last.

3. Complete Support
From system design and installation assistance to ongoing maintenance and emergency servicing, MultiTorque is your long-term dewatering partner.

4. Built for Australia
Our systems are designed for harsh environments—from remote WA mine sites to Brisbane construction zones. We understand the real-world challenges and deliver gear that works.

Service & Maintenance

Dewatering systems run hard and long—especially deep well setups. MultiTorque offers:

Pump diagnostics and servicing
Motor rewinds and impeller replacement
Cable inspections and seal testing
Spare part sourcing and dispatch
Emergency breakdown support

Our workshops in Perth and Brisbane can turn around repairs fast, and our mobile teams are available for onsite support when needed.

Mobile & Custom Systems

Need a mobile solution? We also supply:

Skid-mounted pump sets
Automated float switch or sensor systems
Power distribution units
Trailer-based pump and control stations

For rapid deployment or temporary works, these systems offer a flexible alternative without compromising performance.

Let’s Talk Groundwater Management

If you’re planning a project involving deep excavation or long-term dewatering, don’t risk it with underpowered gear or generic solutions. MultiTorque’s deep well dewatering systems are engineered for high performance and long-term reliability.

📞 Call us today on 1300 726 525
📧 Email: sales@multitorque.com
🌐 Visit: www.multitorque.com.au
🔗 Connect with us on LinkedIn: MultiTorque LinkedIn

In the commercial and industrial world, water is often the enemy. Whether it’s groundwater seeping into a construction zone, stormwater pooling around equipment, or large-scale fluid transfer needs, the solution is simple: you need a commercial dewatering pump that won’t quit.

At MultiTorque, we supply and service durable, high-performance commercial dewatering pumps tailored to meet the needs of Australia’s most demanding industries. From mining to civil construction, we help businesses stay dry, safe, and productive.

Table of Contents

What Are Commercial Dewatering Pumps?

Commercial dewatering pumps are heavy-duty pump systems designed to remove unwanted water from job sites, pits, basements, tunnels, and tanks. Unlike domestic pumps, these systems are engineered to handle large volumes, solids-laden water, abrasive fluids, and continuous operation in tough conditions.

At MultiTorque, we supply a range of commercial pump types including:

Electric submersible dewatering pumps
Diesel-powered surface pumps
Trailer-mounted and skid-mounted systems
Automatic float switch systems
Trash pumps and slurry-capable units

These aren’t your average hardware store pumps—they’re engineered for commercial environments that demand performance and reliability.

Where Are Commercial Dewatering Pumps Used?

Our pumps are deployed across industries such as:

Mining & Quarrying – For pit dewatering and groundwater control
Civil Construction – To manage trench, tunnel, or foundation flooding
Infrastructure Projects – Road and rail construction, bridge works
Agriculture – For irrigation drainage and water table control
Storm Recovery & Emergency Response – Flooded basements and public infrastructure
Waste & Utility Services – Pump stations, holding tanks, and processing plants

Each application presents unique challenges, and we tailor every system to meet the specific flow rate, head height, solids handling, and site logistics.

Why MultiTorque?

1. Built for Harsh Australian Conditions
All our commercial dewatering pumps are selected or built to withstand abrasive slurries, fluctuating water levels, and remote, off-grid conditions.

2. Custom Solutions Available
From trailer builds to electric skids and sensor-automated systems, we can design and fabricate pump units specific to your site and compliance needs.

3. Brands You Can Trust
We only supply and support brands we know perform: Wilden, Orbit, Napco, NOV, Atlas Copco, and others.

4. End-to-End Support
We don’t just drop a pump and walk away. We offer delivery, training, commissioning, ongoing servicing, and emergency breakdown response.

Service That Keeps You Pumping

Downtime is costly. That’s why our workshops in Perth and Brisbane are stocked and staffed for fast turnarounds. We offer:

Full pump rebuilds
Seal and impeller replacement
Electric and diesel motor diagnostics
Preventative maintenance scheduling
Rapid dispatch of spare parts

Whether your system is clogged, overheating, or underperforming, we’ll get you back on track quickly.

Mobile Pump Solutions

Need flexibility? Our trailer-mounted commercial dewatering pumps are ideal for moving between sites or rapid response. Perfect for hire fleets, civil contractors, or mine managers who need power and portability.

We also offer:

IBC-mounted diaphragm pump units
Float switch integration for automatic water level control
Custom hose kits and accessories

If you need a turnkey pump system with no fuss, MultiTorque delivers.

Contact MultiTorque Today

If you’re looking for a commercial dewatering pump that’s reliable, tough, and backed by service that actually cares, let’s chat.

📞 Call us now on 1300 726 525
📧 Email: sales@multitorque.com
🌐 Visit: www.multitorque.com.au
🔗 Connect with us on LinkedIn: MultiTorque LinkedIn

When it comes to controlling water on your site, an automatic dewatering pump takes the hassle out of the process. Designed to operate with minimal human intervention, these pumps start and stop based on water levels—saving you time, labour, and reducing risk.

At MultiTorque, we supply and service high-quality automatic dewatering pumps engineered to withstand Australia’s toughest environments, keeping your operations dry and running smoothly.

Table of Contents

What Is an Automatic Dewatering Pump?

An automatic dewatering pump is equipped with sensors or float switches that detect water levels and activate the pump accordingly. Unlike manual pumps that require constant monitoring, automatic pumps offer:

Hands-free operation
Precise water level control
Reduced risk of pump running dry
Energy efficiency through controlled run times

These features make them ideal for mining pits, construction sites, tunnels, basements, and flood-prone areas.

How Do Automatic Dewatering Pumps Work?

Most automatic dewatering pumps use float switches or electronic sensors. When water rises to a preset level, the switch triggers the pump to start. Once water drops below another set level, the pump automatically stops.

This simple yet effective mechanism ensures:

Continuous removal of excess water
Protection of equipment and site access
Reduced labour costs
Lower energy consumption

MultiTorque offers a range of pumps with customizable auto-start features to suit your site requirements.

Applications for Automatic Dewatering Pumps

Our automatic dewatering pumps are widely used across industries such as:

Mining & Quarrying: To manage groundwater and stormwater inflows
Civil Construction: For trench and excavation dewatering
Tunnelling & Infrastructure: Maintaining dry working environments underground
Agriculture: Irrigation drainage and flood control
Emergency Response: Rapid deployment for floodwater removal

Wherever water threatens to disrupt your workflow, an automatic pump can keep you ahead of the problem.

Why Choose MultiTorque for Your Automatic Dewatering Pump?

1. Industry Expertise
With over 15 years’ experience, MultiTorque understands the challenges faced on Australian sites and delivers pumps built to handle abrasive materials and harsh conditions.

2. Custom Solutions
We supply a range of pumps—from electric submersibles to diesel-driven units—with auto-start controls tailored to your needs.

3. Reliable Brands
Our pumps come from trusted manufacturers like Wilden, Napco, NOV, and Orbit, ensuring durability and performance.

4. Nationwide Support
With workshops and service centres in Perth and Brisbane, MultiTorque offers fast repairs, maintenance, and spare parts Australia-wide.

Service & Maintenance

Automatic dewatering pumps, like all equipment, require regular servicing to maintain peak performance. MultiTorque provides:

Routine inspections and preventative maintenance
Repairs and component replacements
Float switch calibration and sensor testing
Emergency breakdown support

Our team keeps your pumps running efficiently and reliably.

Contact MultiTorque Today

Ready to reduce downtime and labour costs with an automatic dewatering pump? Trust MultiTorque to supply and service pumps engineered for Australian conditions.

📞 Call us on 1300 726 525
📧 Email: sales@multitorque.com
🌐 Visit: www.multitorque.com.au
🔗 Follow us on LinkedIn: MultiTorque LinkedIn

When your job site fills with water, there’s no time for unreliable gear. Whether you’re draining a mine pit, controlling groundwater on a construction site, or handling stormwater overflow, the right pump makes all the difference. At MultiTorque, we supply and service electric submersible dewatering pumps that are engineered for performance, reliability, and safety—even in the harshest Aussie environments.

Table of Contents

What Is an Electric Submersible Dewatering Pump?

An electric submersible dewatering pump is a type of pump that operates while fully submerged in water. Unlike surface pumps, these units are dropped directly into the liquid and push water to the surface via a vertical discharge pipe. They’re powered by electric motors and are commonly used for:

Construction site dewatering
Mine pit and shaft drainage
Tunnelling operations
Basement and trench dewatering
Stormwater and flood control

These pumps are compact, energy-efficient, and designed to handle varying levels of solids, silt, and debris.

Why Choose Electric Submersible Over Diesel?

✅ No exhaust fumes – ideal for confined spaces and tunnels
✅ Quiet operation – suitable for urban or noise-sensitive zones
✅ Lower maintenance – fewer moving parts and no fuel to manage
✅ Energy efficient – especially when connected to mains power or site generators

MultiTorque supplies electric submersible units that are both portable and powerful. Whether you’re running on 240V, 415V, or need ATEX-rated safety, we’ll spec the right pump for your site.

Applications We Support

Our electric submersible dewatering pumps are deployed across:

Mining operations in QLD, WA, and NT
Civil construction projects in metro and remote locations
Tunnelling and infrastructure builds
Industrial drainage and waste management
Agriculture and irrigation drainage

Each site has different demands. That’s why we assess head height, flow rate, solids content, and power availability before recommending the best solution.

Pump Features You Can Expect

At MultiTorque, we supply pumps with features like:

Built-in float switches for automatic start/stop
Solids-handling impellers for dirty or silt-laden water
Corrosion-resistant construction (stainless steel and cast iron options)
Thermal protection to prevent motor burnout
Compact, portable frame designs

We work with trusted brands like Tsurumi, Lowara, Atlas Copco, and more to ensure your investment is built to last.

Mobile Skids & Emergency Systems

Need a mobile solution? We also build:

Skid-mounted electric pump systems
Trailer-based dewatering setups
IBC-integrated units with prewired controls
Rapid-deploy emergency pumps for storm response or site flooding

Whether you’re dealing with a mine shutdown or flash flooding, we’ve got the gear to act fast.

Service, Repairs & Spare Parts

MultiTorque doesn’t just sell pumps—we keep them running. Our workshops in Perth and Brisbane offer:

Full pump rebuilds and diagnostics
Seal, cable, and motor replacements
Performance testing and custom modifications
Fast access to spares and critical parts

With decades of experience, our team understands the urgency behind dewatering jobs—and we move just as fast as the water you need gone.

Why Choose MultiTorque?

✔ 15+ years of industrial pumping experience
✔ Specialists in harsh and remote site applications
✔ Nationwide shipping and servicing
✔ Custom builds and compliance-ready setups
✔ Honest advice, built on long-term partnerships

We don’t just supply pumps—we supply confidence, control, and compliance in every job.

Get the Right Pump for the Job

Don’t risk your site with undersized or unreliable equipment. Let MultiTorque supply your next electric submersible dewatering pump, custom-built to your exact site requirements.

📞 Call us today on 1300 726 525
📧 Email: sales@multitorque.com
🌐 Visit: www.multitorque.com.au
🔗 Connect with us on LinkedIn: MultiTorque LinkedIn

When water is working against your operation—whether it’s flooding a mine site, stalling a civil construction project, or clogging up your pit—you don’t just need a pump. You need a dewatering pump company that understands the real-world demands of your industry.

At MultiTorque, we’re more than just a supplier. We’re one of Australia’s most trusted dewatering pump companies, providing tailored pumping solutions, mobile units, and servicing that keeps your site productive and compliant.

Table of Contents

What Sets Dewatering Pump Companies Apart?

Not all dewatering pump companies are created equal. Some just ship out equipment and leave you to figure out the rest. At MultiTorque, we deliver complete, site-ready systems backed by expert support and nationwide service.

Here’s what makes a reliable dewatering partner:

✅ Experience with harsh environments and tough fluids
✅ Custom-built pump systems to suit your site
✅ Fast access to spare parts and rebuild kits
✅ Mobile setups available for remote or shifting operations
✅ On-call support and repairs from experienced technicians

We tick all those boxes—and more.

Built for the Toughest Jobs

Our dewatering pump systems are used across sectors where reliability is non-negotiable:

Mining & Quarrying: Removing groundwater and managing tailings
Civil & Construction: Site drainage and trench dewatering
Infrastructure Projects: Tunnel, rail, and road drainage
Agriculture: Managing excess irrigation or flood runoff
Disaster Recovery: Flood response and emergency pumping

From pit dewatering to large-volume bypass pumping, we provide tough, tested solutions that don’t break under pressure.

Our Dewatering Pump Capabilities

MultiTorque supplies and services:

Trailer-mounted diesel dewatering pumps
Skid-mounted systems for remote pits
Electric and air-operated diaphragm pumps
Trash and slurry pumps for solids handling
Self-priming and auto-start options
Custom hose kits, floats, filters, and valves

We build everything in-house to suit your requirements—and we only use trusted brands like Napco, NOV, Wilden, and Orbit.

Servicing Australia from Coast to Coast

With workshops in Perth and Brisbane, MultiTorque supports operations throughout WA, QLD, NSW, NT, and beyond. Whether you need an urgent rebuild, an on-site inspection, or a custom pump trailer delivered fast—we’ve got the network and gear to make it happen.

Need servicing? We offer:

Pump rebuilds and diagnostics
Seal, impeller, and stator replacement
Performance testing and tuning
Custom retrofits and system upgrades

We keep common wear parts in stock and can dispatch same-day for urgent jobs.

Why MultiTorque Is a Leader Among Dewatering Pump Companies

Over 15 years’ experience with industrial pump systems
Proven track record in harsh and remote environments
Custom engineering and fabrication in-house
Nationwide shipping, servicing, and support
Honest advice and real long-term client relationships

If your current supplier is falling short—or if you’ve outgrown your current system—let’s talk. We’ll show you how to streamline your fluid handling with a smarter, tougher dewatering solution.

Contact MultiTorque Today

Whether you need a new dewatering system, a rebuild, or just someone who actually picks up the phone and understands your industry—MultiTorque has your back.

📞 Call us on 1300 726 525
📧 Email: sales@multitorque.com
🌐 Visit: www.multitorque.com.au
🔗 Follow us on LinkedIn: MultiTorque LinkedIn

Dewatering Pump Companies You Can Rely On—MultiTorque Delivers Results 2025

Dewatering Pump Companies You Can Rely On—MultiTorque Delivers Results 2025Dewatering Pump Companies You Can Rely On—MultiTorque Delivers Results 2025

Dewatering Pump Companies You Can Rely On—MultiTorque Delivers Results 2025

v

Dewatering Pump Companies You Can Rely On—MultiTorque Delivers Results 2025

Whether you’re managing groundwater on a mine site, clearing a flooded pit, or setting up for a civil works project, having the right dewatering pump can make or break your timeline. At MultiTorque, we supply and service high-performance dewatering pumps that are tough, reliable, and built for harsh Australian environments.

From mobile pump trailers to permanent installations, we customise dewatering solutions to keep your site dry, safe, and operational.

Table of Contents

What Is a Dewatering Pump?

A dewatering pump is designed to remove water from construction zones, mines, tunnels, pits, basements, or any location where water buildup needs to be controlled. These pumps are typically:

Centrifugal or diaphragm type
Engine-driven (diesel/electric)
Capable of handling dirty water or solids-laden fluids
Mounted on skids or trailers for mobility

At MultiTorque, we engineer pump systems to match your application, whether you’re pumping from 10 metres deep or across 300 metres of uneven terrain.

Built for Australian Conditions

Dewatering in Australia means dealing with abrasive soil, corrosive minerals, and unpredictable weather. That’s why we only use high-grade components from trusted brands like Wilden, Napco, NOV, and Orbit. Our pumps are built with:

Abrasion-resistant materials
Heavy-duty seals and bearings
Self-priming capability
Solids-handling impellers
And options for auto start/stop float systems

We don’t cut corners—and neither should you when it comes to keeping your site productive and safe.

Mobile Dewatering Pump Systems

Need a mobile unit that can be moved quickly between sites? We specialise in:

Trailer-mounted dewatering pump setups
Custom skids for mine pits and dam applications
Remote-start diesel pump systems
IBC-mounted electric diaphragm pump kits

These are ideal for contractors, mine operators, and site managers who need flexibility without sacrificing performance.

Who Uses Our Dewatering Pumps?

We provide dewatering pump solutions across industries such as:

Mining & Quarrying
Civil Construction
Tunnelling & Infrastructure
Agriculture & Irrigation
Emergency Flood Response
Water Utilities & Councils

Whether it’s site access, groundwater control, or post-storm recovery, we’ve got the hardware and expertise to deliver.

We Don’t Just Sell Pumps—We Build Systems

At MultiTorque, we go beyond just handing you a pump in a box. We offer:

Full system design based on your flow rate, elevation, and solids content
Custom fabrication of mounting frames, hose kits, control panels, and safety enclosures
Ongoing service, diagnostics, and parts
On-site support in WA, QLD, and across Australia

You tell us the problem—we’ll build the solution.

Keep Downtime to a Minimum

Downtime costs money. That’s why we stock common pump spares, rebuild kits, seals, impellers, and motors—ready for dispatch when you need them. And if you’ve got a dewatering pump that’s not performing like it used to? We can repair or rebuild it with a fast turnaround in our Perth or Brisbane workshops.

Let’s Talk Dewatering

If you’re looking for a dewatering pump that actually holds up under pressure—not just in the brochure—get in touch with MultiTorque. We’ll spec out the right pump system for your site and get you running quickly and safely.

📞 Call us on 1300 726 525
📧 Email: sales@multitorque.com
🌐 Website: www.multitorque.com.au
🔗 Follow us on LinkedIn: MultiTorque LinkedIn

When it comes to moving fluids efficiently across industrial, commercial, or remote settings, having the right transfer pump system makes all the difference. Whether you’re transferring water, fuel, oil, chemicals, or sludge, your system must be reliable, durable, and built to handle the specific requirements of your operation.

At MultiTorque, we design, supply, and support fully integrated transfer pump systems for clients across Australia. With more than 15 years of hands-on experience, we understand the demands of real-world applications—and we build systems that deliver.

Table of Contents

What is a Transfer Pump System?

A transfer pump system is a complete setup designed to move fluids from one point to another—often across varying distances, elevations, or conditions. These systems typically include:

A pump (centrifugal, diaphragm, positive displacement, or peristaltic)
Piping or hosing
Power supply (electric, diesel, or air-operated)
Valves, filters, and fittings
Control systems or automation (if required)
Mounting platform (static skid or mobile trailer)

From simple setups to complex multi-stage transfer operations, these systems are crucial in industries like mining, oil & gas, agriculture, wastewater management, and civil construction.

Key Benefits of MultiTorque’s Transfer Pump Systems

1. Purpose-Built Design
We don’t believe in one-size-fits-all. Each pump system is engineered based on your flow rate, fluid type, pressure head, and operational environment.

2. Mobile or Fixed Installations
Choose from skid-mounted, trailer-mounted, or fixed installations depending on your site needs. Our custom trailer pump units are ideal for remote and off-grid operations.

3. Compatibility with a Wide Range of Fluids
We build systems for water, fuel, oils, slurries, chemicals, and abrasive fluids. All materials are selected based on chemical compatibility and application safety.

4. Power Options to Suit Every Site
Electric, diesel, or air-driven pump systems are available, with generator compatibility and explosion-proof configurations if required.

5. Australian Support, Nationwide
With locations in Perth and Brisbane, MultiTorque provides full design, supply, servicing, and remote support across the country.

Common Applications for Transfer Pump Systems

Our systems are trusted across Australia in applications such as:

Mine dewatering and tailings transfer
Fuel distribution and transfer skids
Chemical dosing and mixing
Agricultural water and fertiliser movement
Stormwater and wastewater bypass
Industrial fluid transfer between tanks or IBCs

We also build fire system component pump sets through our Flexco division. If it needs to be moved, stored, dosed, or controlled—we have a solution.

Custom-Built for Harsh Australian Conditions

We’ve seen the damage that sand, heat, and corrosive fluids can do to poorly built systems. That’s why every MultiTorque transfer pump system is engineered for reliability and easy servicing. We only use components from proven brands like Wilden, NOV, Napco, and Orbit, and we offer full rebuilds, upgrades, and replacement parts as needed.

Our in-house fabrication and assembly ensure total quality control—and faster turnaround for clients on a deadline.

Servicing, Diagnostics & Upgrades

Already have a transfer pump system but it’s underperforming? We can help. Our technicians provide:

Full diagnostics and flow testing
System upgrades and retrofits
Replacement of worn-out seals, hoses, motors, or impellers
Rebuilds for electric and diesel-driven units

Whether your system is 2 years old or 20, we’ll keep it moving.

Ready to Upgrade Your Fluid Handling System?

MultiTorque is your one-stop partner for transfer pump systems that work as hard as you do. Whether you need a mobile water trailer for remote sites, a diesel-powered fuel transfer setup, or a chemical dosing unit integrated with your PLC—we’ve done it all, and we’re ready to help.

📞 Call us on 1300 726 525
📧 Email: sales@multitorque.com
🌐 Visit: www.multitorque.com.au
🔗 Connect with us: MultiTorque LinkedIn

When your job involves moving thick, abrasive fluids like drilling mud, tailings, sludge, or slurry, not just any pump will do. You need a mud transfer pump that’s built tough, won’t clog under pressure, and can handle the abuse of real-world site conditions. That’s where MultiTorque comes in.

We supply and service high-performance mud transfer pumps for mining, drilling, tunnelling, and wastewater applications across Australia. Whether you need a diesel-powered skid pump or a portable electric unit for site clean-up, we’ll help you move the mess—safely, efficiently, and without downtime.

Table of Contents

What Is a Mud Transfer Pump?

A mud transfer pump is a heavy-duty pump designed to move thick, viscous, and abrasive fluids. Unlike standard water pumps, mud pumps are engineered with larger clearances, robust components, and clog-resistant designs. Many use positive displacement or self-priming centrifugal mechanisms to ensure consistent flow, even with high solids content.

These pumps are commonly used in:

Drilling operations
Slurry pipelines
Wastewater treatment plants
Mining and tailings ponds
Oil & gas field services
Tunnelling and construction projects

If it’s dirty, thick, and hard to pump, you need a system built for mud—not for clean water.

Why Choose a Mud Pump from MultiTorque?

1. Built for Harsh Conditions
Our mud transfer pumps are engineered to handle abrasive solids, high viscosities, and corrosive environments. Whether you’re dealing with bentonite mud, drill cuttings, or waste sludge, we’ve got a pump that’ll stand up to it.

2. Diesel, Electric & Air Options
We offer a variety of power types, including diesel engine-driven, electric-powered, and pneumatic (air-operated) pumps to suit your site’s infrastructure and safety needs.

3. Custom Skid or Trailer Mounts
Need mobility on-site? We build and supply skid-mounted or trailer-mounted mud transfer pump systems, ideal for remote or large-scale operations.

4. Fast Turnaround & Australia-Wide Support
With branches in Perth and Brisbane, we deliver quickly and offer full servicing across all states. Our technicians also provide on-site support for breakdowns, rebuilds, or upgrades.

Common Pump Types for Mud Transfer

At MultiTorque, we supply several pump types designed for mud and slurry:

Progressive Cavity Pumps: Ideal for high-viscosity mud with low pulsation and continuous flow.
Diaphragm Pumps: Air-operated and clog-resistant—great for portable setups or small-scale operations.
Centrifugal Trash Pumps: Self-priming units capable of handling solids up to 3 inches—used in flood cleanup and pit dewatering.
Peristaltic Hose Pumps: Great for abrasive and shear-sensitive mud with no valves or seals to clog.

Not sure what suits your job? Our team will assess your site conditions, mud composition, flow rate, and power availability to match you with the best solution.

Who Uses Our Mud Transfer Pumps?

We work with industries and contractors across:

Mining & Minerals Processing
Oil & Gas Drilling
Civil Construction & Tunnelling
Environmental Cleanup Projects
Wastewater & Sewage Plants

Whether you’re decanting drilling fluids or managing tailings transfer, our systems are designed to keep your operations flowing without costly delays.

Servicing, Rebuilds & Spare Parts

MultiTorque doesn’t just supply pumps—we keep them running. Our workshops handle:

Full pump rebuilds
Impeller and rotor replacements
Hose, seal, and stator servicing
Performance testing and diagnostics

We also stock common wear parts for quick dispatch—keeping downtime to a minimum.

Let’s Talk Mud

Your mud isn’t a problem—it’s just a challenge waiting for the right pump. At MultiTorque, we turn thick, dirty, hard-to-move fluids into smooth-flowing operations.

📞 Call MultiTorque on 1300 726 525
📧 Email: sales@multitorque.com
🌐 Visit our site: www.multitorque.com.au
🔗 Follow us on LinkedIn: MultiTorque LinkedIn

When transferring diesel, petrol, aviation fuel, or solvents, there’s one priority that outranks flow rate or portability: safety. In volatile environments, even a small spark can trigger a disaster. That’s why industries across Australia rely on the explosion proof fuel transfer pump—designed to move flammable liquids while meeting stringent safety standards.

At MultiTorque, we supply and service explosion proof fuel transfer pumps that meet the demands of hazardous zones, refuelling stations, mining operations, and industrial sites. With decades of experience in fluid handling, we ensure your transfer system isn’t just efficient—it’s compliant, rugged, and ready for anything.

Table of Contents

What Is an Explosion Proof Fuel Transfer Pump?

An explosion proof fuel transfer pump is specifically engineered to transfer flammable liquids in environments where vapours or combustible particles could ignite. These pumps feature sealed, spark-free motors, anti-static materials, and grounding features to prevent ignition during operation.

They are rated for hazardous zones under international standards such as ATEX, IECEx, and Class I Div 1—depending on your local compliance requirements.

When Are They Required?

Explosion proof transfer pumps are essential for:

Refuelling stations and depots
Mining sites and fuel skids
Aircraft hangars and ground operations
Marine diesel transfer and bunkering
Chemical and fuel manufacturing
Remote fuel distribution in high-temperature zones

If your application involves petroleum, diesel, jet fuel, ethanol, methanol, or volatile solvents, standard motors are not safe to use. In these situations, MultiTorque recommends a properly rated explosion proof transfer pump to reduce risk and meet safety code.

Key Features of Our Explosion Proof Fuel Transfer Pumps

1. Sealed Explosion-Proof Motors
Designed to contain any internal ignition within the motor housing, preventing external fires or explosions.

2. Grounding & Bonding Protection
Prevents static build-up during fuel flow, a common source of accidental ignition.

3. ATEX & IECEx Certified
Many of our pumps are fully certified for use in hazardous zones—just tell us your requirements.

4. Durable Construction
Available in stainless steel, cast iron, or aluminium—depending on chemical compatibility and use case.

5. Multiple Power Options
Electric (240V or 415V), diesel-driven, or pneumatic explosion proof pumps available for mobile or fixed installations.

Why Choose MultiTorque?

MultiTorque doesn’t just sell pumps—we engineer complete solutions. Here’s why industries across Australia trust us:

✅ Specialists in hazardous area equipment
✅ ATEX/IECEx advice for full compliance
✅ Custom skid-mounted or trailer-based systems
✅ Support for remote sites and harsh climates
✅ Fast turnaround and Australia-wide freight
✅ Full servicing, rebuilds, and parts supply

Whether you need a portable fuel transfer solution for the bush or a permanent depot installation, we’ll make sure your system is compliant, reliable, and built for the long haul.

Custom Builds for Harsh Australian Conditions

We design and build custom explosion proof fuel transfer pump systems, including:

Trailer-mounted fuel skids
IBC transfer kits
Bulk fuel decanting stations
Mining camp refuelling stations

All units are designed to suit your flow rate, fuel type, hazardous area rating, and site power availability. If you’re operating in Zone 1 or Zone 2 conditions, we’ll spec your equipment accordingly and deliver a turnkey solution.

Get the Right Fuel Transfer Pump—Without the Risk

Transferring fuel is risky business. But with the right explosion proof equipment, you can minimise danger and maximise uptime. Don’t take chances with non-rated gear—get a pump that’s designed for hazardous zones and backed by real support.

📞 Call MultiTorque today on 1300 726 525
📧 Email: sales@multitorque.com
🌐 Visit: www.multitorque.com.au
🔗 Connect with us: MultiTorque on LinkedIn

When working with aggressive chemicals like sodium hydroxide, potassium carbonate, or ammonium hydroxide, safety and equipment durability are non-negotiable. That’s where caustic transfer pumps come in—designed specifically to handle corrosive and high-pH fluids without damage to pump components or risk to operators.

At MultiTorque, we supply, service, and support a wide range of caustic transfer pumps for industries across Australia. Whether you’re in mining, food processing, manufacturing, or water treatment, our pumps are engineered to withstand the harshest substances—and keep working day after day.

Table of Contents

What Are Caustic Transfer Pumps?

Caustic transfer pumps are designed to move highly alkaline (basic) fluids safely and efficiently. These chemicals are extremely corrosive and can degrade standard pump materials like cast iron, mild steel, or even certain plastics.

To combat this, caustic pumps are built using resistant materials like:

Polypropylene
PVDF (polyvinylidene fluoride)
PTFE (Teflon)
Stainless steel
Hastelloy (for extreme applications)

They often include mechanical seals or seal-less magnetic drive systems to prevent leaks, protect operators, and comply with strict safety regulations.

Where Are Caustic Transfer Pumps Used?

MultiTorque supplies caustic-resistant pumps for a variety of sectors, including:

Water Treatment Plants: Transferring sodium hydroxide (caustic soda) for pH balancing and treatment processes.
Mining Operations: Handling reagent chemicals in mineral processing.
Food & Beverage Manufacturing: Cleaning systems using caustic CIP (clean-in-place) chemicals.
Chemical Dosing & Blending: Accurate transfer of aggressive chemicals with minimal operator exposure.
Industrial Cleaning: Circulating caustic detergents and degreasers.

If your operation involves high-pH fluids, you need a pump that can handle the job without corroding, leaking, or breaking down unexpectedly.

Why Choose MultiTorque for Caustic Transfer Pumps?

1. Chemical Compatibility Experts
We match your chemical specs with the right materials of construction. One-size-fits-all doesn’t cut it when you’re dealing with caustic media.

2. Trusted Brands
We supply robust models from top pump manufacturers like Wilden, Napco, NOV, and Orbit, as well as specialty chemical transfer pumps engineered for hazardous fluid handling.

3. Custom Solutions Available
We build skid-mounted or trailer-mounted caustic transfer systems—ideal for mobile use or remote dosing stations.

4. Australia-Wide Support
Our Perth and Brisbane branches offer fast delivery, support, and servicing across all states.

5. On-Site Repairs & Spare Parts
From mechanical seal replacement to impeller upgrades, we service what we sell—and keep your equipment running like new.

Choosing the Right Caustic Transfer Pump

Selecting the right pump involves more than just checking flow rate and power. Here are the key considerations:

Chemical concentration & temperature
Required flow rate (L/min) and head height
Material compatibility with wetted parts
Pump type (diaphragm, centrifugal, peristaltic, mag drive)
Seal vs. seal-less requirements for leak prevention

Not sure what you need? Just tell us what chemical you’re pumping, how much, and how far—we’ll do the rest.

Protect Your Team, Protect Your Equipment

Using the wrong pump for caustic chemicals can lead to leaks, equipment failure, or worse—safety incidents. MultiTorque helps you avoid these issues with fit-for-purpose caustic transfer pumps that are built to last.

We also offer regular pump inspections, rebuilds, and chemical compatibility checks, so you can stay compliant and operational without interruption.

Let’s Talk Caustic Pumps

Whether you need a new pump, a custom-built unit, or a replacement for a failing system, MultiTorque is here to help. We’ll work with you to find a pump that suits your needs—and make sure it keeps working for years to come.

📞 Call MultiTorque on 1300 726 525
📧 Email: sales@multitorque.com
🌐 Website: www.multitorque.com.au
🔗 Connect on LinkedIn: MultiTorque LinkedIn