In the world of winemaking, precision, hygiene, and gentle handling are non-negotiable. Whether you’re transferring must during fermentation or racking delicate vintages into barrels, a wine pump is an essential part of maintaining quality and preserving the character of your wine.

At MultiTorque, we supply and service high-quality pumps for a wide range of food and beverage applications—including wine production. From boutique vineyards to commercial wineries across Australia, we deliver pumps that are engineered for performance, durability, and most importantly, the gentle transfer that wine demands.

🔗 Visit MultiTorque
🔗 Follow us on LinkedIn

What is a Wine Pump?

A wine pump is a sanitary pump used in the winemaking process to transfer wine or grape must from one container to another. It is specially designed to handle liquid with a high risk of oxidation or contamination, and to move wine without damaging its taste, aroma, or structure.

Unlike general-purpose industrial pumps, wine pumps are made from food-grade materials, often with gentle pumping action to avoid disturbing delicate compounds or tannins in the wine.

Common Applications for Wine Pumps

Wine pumps are used at multiple stages of the winemaking process:

Stage	Use of Wine Pump
Crush & Fermentation	Transferring grape must to fermentation tanks
Pump Over (Remontage)	Circulating wine over grape skins for extraction
Racking	Moving wine off lees into clean containers
Filtration & Bottling	Transferring clarified wine to filtration systems or bottling lines
Barrel Transfers	Gently moving wine in and out of oak barrels

Types of Wine Pumps

Different phases of winemaking require different pump types, and selecting the right one can make a big difference in wine quality.

🍷 1. Flexible Impeller Pumps

Ideal for low to medium-viscosity liquids
Gentle on product, self-priming
Often reversible for easy racking and cleaning
Commonly used in small wineries or for barrel work

🍇 2. Peristaltic Pumps

Best for delicate must or wines with solids
Fluid never contacts moving parts (high hygiene)
Extremely gentle with zero shear
Common in premium winemaking environments

💧 3. Diaphragm Pumps (AODD)

Air-operated, ideal for portable wine pumps
Can handle solids and foamy liquids
Food-grade construction with minimal oxidation

🔄 4. Centrifugal Pumps (Sanitary)

High-volume applications
Used in bottling and filtration
Not as gentle—best suited for later stages

What Makes a Good Wine Pump?

When sourcing a wine pump, look for the following:

✅ Food-Grade Materials

Stainless steel 316, EPDM seals, or other sanitary materials ensure no contamination of the wine.

✅ Gentle Handling

Low-shear or non-contact pumping prevents oxidation and protects wine integrity.

✅ Easy to Clean (CIP)

Winery equipment needs frequent cleaning. A wine pump should support Clean-in-Place (CIP) or be easy to disassemble.

✅ Reversible Flow

Great for filling and draining barrels or tanks, and gives greater flexibility in layout.

✅ Mobility

Portable trolley-mounted pumps are ideal for wineries that need to move equipment between tanks, crush pads, and barrels.

Industries We Serve

At MultiTorque, we work with a wide range of businesses in the food and beverage sector, including:

Boutique vineyards & cellar doors
Large commercial wineries
Contract winemakers
Breweries and cider houses
Juice and beverage manufacturers

Custom Pumping Solutions for Wineries

No two wineries are the same. That’s why we offer custom wine pump packages including:

Portable pump skids on stainless trolleys
Barrel transfer setups with hoses and fittings
Integrated control panels for speed and flow control
Food-grade hose and clamp kits
Air compressors for AODD systems
Replacement seals, impellers, and spares

Whether you’re scaling up production or upgrading ageing infrastructure, we’ll help you choose the right wine pump for your needs—and support it long after install.

Servicing & Repairs

Wine pumps operate during peak harvest times—so downtime is not an option. That’s why MultiTorque offers:

Scheduled servicing during off-season
Emergency pump rebuilds in our Perth & Brisbane workshops
Seal and impeller replacements
Hygienic cleaning, testing, and reassembly

We also carry spare parts for major pump brands, and offer fast turnaround for urgent winery repairs.

Why Choose MultiTorque?

With over 15 years of experience supplying pumps to Australian industries, we’ve become a trusted partner for reliable pumping systems—whether you’re bottling wine or dewatering a mine.

🛠️ Expert Support

We’re not just salespeople—we’re pump technicians. We help you spec, size, and maintain your equipment.

🍷 Wine Industry Knowledge

We understand the unique pressures and seasonality of winemaking, and offer equipment tailored for vintage time.

🇦🇺 National Support

From Margaret River to the Hunter Valley, we supply and support winemakers across Australia.

Ready to Upgrade Your Winery’s Pumping System?

If you need a pump that’s gentle on your wine but tough on performance, talk to MultiTorque today. We’ll match you with a solution built to last—and built for flavour.

📞 Call us at 1300 726 525
📧 Email: sales@multitorque.com
🌐 www.multitorque.com.au
🔗 Follow us on LinkedIn

Multi Torque Industries

In demanding industrial and municipal environments, standard pumps just don’t cut it. Heavy duty submersible sewage pumps are designed to handle the dirtiest jobs—literally. Whether you’re dealing with raw sewage, sludge, or industrial wastewater, you need equipment built for high solids, high flow, and high reliability.

At MultiTorque, we supply and service top-tier submersible sewage pumps engineered to withstand the harshest conditions. From mining camps in WA to treatment plants in QLD, we help keep Australia flowing.

🔗 Visit the MultiTorque Homepage
🔗 Connect with MultiTorque on LinkedIn

What Are Heavy Duty Submersible Sewage Pumps?

A heavy duty submersible sewage pump is a pump that is fully submerged in the fluid it is designed to handle. Unlike standard above-ground sewage pumps, these are specifically engineered to handle:

Raw sewage with high solid content
Industrial wastewater
Grease and sludge
Abrasive or corrosive liquids
Continuous-duty applications in harsh environments

They’re often used in wastewater treatment facilities, mining operations, food processing, and commercial facilities where high-capacity, non-clogging performance is essential.

Key Features of Heavy Duty Submersible Sewage Pumps

✅ Solids Handling Capabilities

Can handle solids up to 100 mm (or larger)
Impeller designs such as vortex or channel-style minimize clogging
Ideal for raw sewage and effluent pumping

✅ Corrosion and Abrasion Resistance

Cast iron, stainless steel, or duplex alloy construction
Ceramic-coated seals and hardened impellers
Suitable for chemically aggressive environments

✅ Long Service Life

Double mechanical seals with oil chambers
Thermal protection and moisture detection built in
Designed for continuous, unattended operation

✅ Energy Efficiency

Available with high-efficiency motors and variable speed drive (VSD) options
Low maintenance requirements = lower total cost of ownership

Where Are Submersible Sewage Pumps Used?

🏗️ Municipal & Government

Wastewater treatment plants
Sewer pump stations
Stormwater overflow control
Septic systems

🛠️ Industrial

Meat and food processing facilities
Chemical and pharmaceutical plants
Oil and gas separation pits
Heavy manufacturing washdown areas

🛢️ Mining

Underground sumps
Remote camp effluent systems
Tailings containment pits
Sludge dewatering

At MultiTorque, we support projects in Perth, Brisbane, and across regional Australia with the right pump for every application.

Choosing the Right Heavy Duty Submersible Pump

When selecting a pump, it’s critical to match the right specs to your site’s requirements. Factors to consider:

Factor	Why It Matters
Flow rate (L/min or m³/h)	Ensures the pump can keep up with demand
Head pressure (m)	Affects motor power and impeller design
Solid particle size	Determines required impeller clearance
Liquid composition	Chemicals, pH, temperature affect material choice
Duty cycle	Continuous, intermittent, or automatic

We work closely with customers to assess site conditions and recommend the best submersible sewage pump system—no guesswork, just results.

Top Brands We Work With

At MultiTorque, we supply, service, and repair equipment from trusted names in the pump industry, including:

Flygt
Tsurumi
Zenit
ABS/Sulzer
Lowara
Davey Water
Ebara

Whether you’re replacing a failed unit or building a new pump station, we can supply the exact model—or a compatible upgrade—ready for Australian conditions.

Pump System Integration & Custom Builds

Sometimes an off-the-shelf pump just won’t cut it. That’s where we shine.

Our team of engineers and fabricators builds custom solutions such as:

Skid-mounted submersible pump systems
Float switch and control panel integration
Stainless steel lifting chains, guide rails, and bases
Telemetry and remote monitoring
Plug-and-play trailer systems for mobile wastewater handling

If you need a turnkey solution, we can design and deliver it.

Repairs, Rebuilds & Spare Parts

Heavy duty doesn’t mean maintenance-free. These pumps operate in brutal conditions, and timely servicing prevents catastrophic failures.

MultiTorque Provides:

Full workshop rebuilds in Perth and Brisbane
Mechanical seal and bearing replacements
Electrical diagnostics and cable repair
Impeller and wear plate machining
Site inspections and condition reporting

We stock and source genuine spare parts for most major brands, and we can fabricate custom components if OEM is unavailable.

Why Choose MultiTorque?

You don’t want to waste time and money on underperforming pumps. You need a partner that delivers reliability, performance, and support.

✅ 15+ Years of Industry Experience

We’ve worked on mine sites, municipal treatment plants, and remote stations—across WA, QLD, and beyond.

✅ Custom Engineering Expertise

Need a mobile pumping trailer with remote start? No problem. We design around your needs.

✅ Full Life-Cycle Support

From design and selection to install, service, and rebuild—we’re with you the whole way.

Ready for a Heavy Duty Pump That Handles the Job?

If you need a heavy duty submersible sewage pump that can take a beating and keep pumping—MultiTorque has your back. Talk to our team today and we’ll help spec, supply, and support the right solution.

📞 Call us at 1300 726 525
📧 Email: sales@multitorque.com
🌐 www.multitorque.com.au
🔗 Follow us on LinkedIn

When it comes to fluid transfer in industrial settings, few machines are as essential—or as widely used—as the industrial centrifugal pump. Known for their simple design, robust performance, and versatility, these pumps are the go-to solution across mining, agriculture, water treatment, and chemical processing.

At MultiTorque, we supply, service, and support high-quality centrifugal pumps tailored to meet the demands of Australia’s toughest industrial operations.

🔗 Visit MultiTorque Homepage
🔗 Connect with MultiTorque on LinkedIn

What Is an Industrial Centrifugal Pump?

An industrial centrifugal pump is a mechanical device used to move fluid by converting rotational kinetic energy into hydrodynamic energy. This energy is generated by a rotating impeller that draws liquid into the pump casing and pushes it outward through the discharge.

These pumps are ideal for:

High-flow, low-viscosity applications
Continuous-duty cycles
Large-scale fluid handling with minimal maintenance
Systems requiring high reliability and energy efficiency

How Do Centrifugal Pumps Work?

The operating principle is straightforward:

Liquid enters the pump through the suction inlet.
A rotating impeller increases the fluid’s velocity.
The high-speed fluid is directed into a volute casing.
Kinetic energy is converted into pressure, pushing fluid through the discharge outlet.

This mechanism allows for continuous flow and is ideal for systems requiring consistent, reliable pumping.

Types of Industrial Centrifugal Pumps

At MultiTorque, we supply and service a wide range of centrifugal pump designs, including:

🌊 End Suction Pumps

Most common design for general-purpose use
Used in HVAC, water transfer, and irrigation
Simple maintenance and excellent flow capabilities

🔄 Multistage Centrifugal Pumps

Multiple impellers for high-pressure applications
Ideal for boiler feed, high-rise water supply, and long-distance pipelines

🌀 Split Case Pumps

Double-suction design for large-volume transfer
Excellent efficiency and durability
Common in municipal and industrial water systems

⚙️ Self-Priming Centrifugal Pumps

Eliminates the need for foot valves
Great for portable and intermittent-duty applications
Perfect for dewatering and site drainage

💧 Vertical Inline Pumps

Space-saving vertical design
Ideal for industrial cooling and process water systems

Key Industries That Rely on Centrifugal Pumps

Industry	Application Example
Mining	Slurry transport, dewatering, tailings water recovery
Water Treatment	Filtration systems, chlorination, raw water intake
Agriculture	Irrigation, fertigation, livestock watering systems
Manufacturing	Process cooling, fluid transfer, boiler feed
Oil & Gas	Condensate return, injection systems, refining
Construction	Groundwater control, pressure boosting, sump removal

Our team at MultiTorque helps match the right centrifugal pump to each unique fluid, flow rate, head pressure, and environmental condition.

Benefits of Industrial Centrifugal Pumps

Centrifugal pumps offer numerous benefits over other pump types, including:

✅ High Flow Rates

Centrifugal pumps deliver large volumes of fluid efficiently, making them ideal for high-throughput systems.

✅ Simplicity & Reliability

With few moving parts and a non-complex design, these pumps are easier to maintain and less prone to mechanical failure.

✅ Energy Efficiency

When properly sized and paired with a VSD (variable speed drive), centrifugal pumps operate at excellent efficiency levels, reducing long-term energy costs.

✅ Scalability

Whether you’re running a small facility or a large-scale plant, centrifugal pumps are available in a wide range of sizes and materials to meet your demands.

Common Problems (and How MultiTorque Solves Them)

Even the most reliable centrifugal pumps can face issues if not correctly installed or maintained. Here are a few examples—and how we address them:

Problem	Cause	MultiTorque Solution
Cavitation	Inadequate suction pressure	System design reviews, impeller re-sizing
Seal leaks	Worn seals or misalignment	Seal replacements, alignment checks
Excessive noise/vibration	Imbalance or pipe strain	Dynamic balancing, pipework support retrofit
Poor performance	Incorrect pump sizing	Custom pump selection and on-site assessment

Our technicians conduct on-site diagnostics, system audits, and full overhauls to keep your pumps running at peak performance.

Custom Centrifugal Pump Systems

At MultiTorque, we go beyond simple pump supply. We design and build custom pump systems to suit the specific flow, pressure, and layout requirements of your site.

Our custom solutions can include:

Skid-mounted pump sets
Stainless steel pipework and manifolds
VSD-controlled electric motors
Remote control panels and telemetry
Mobile pump trailers for site portability

If off-the-shelf doesn’t cut it, we’ll fabricate the system you need from the ground up.

Service & Maintenance

Industrial operations can’t afford downtime. That’s why we offer:

🛠️ Full workshop rebuilds
🔁 Pump exchange programs
📦 Genuine and aftermarket spare parts
🔍 On-site inspection and servicing
📋 Preventative maintenance contracts

We support leading brands like Flowserve, Orbit, Wilden, Napco, and more—ensuring you get reliable service regardless of your pump make.

Why Choose MultiTorque?

With over 15 years in the industry and a deep understanding of industrial fluid handling, we deliver solutions built for Australian conditions.

🧠 Expertise

Our team includes experienced technicians, electricians, and designers who understand both mechanical systems and real-world applications.

⚒️ Full-Service Support

From pump sizing and selection to installation, commissioning, and repairs—we’re with you all the way.

🚛 National Coverage

With locations in Perth and Brisbane, we service clients across WA, QLD, NSW, and VIC.

Ready to Upgrade Your Centrifugal Pump System?

Looking for a centrifugal pump that won’t quit? Whether you need a single replacement or a complete skid system, MultiTorque is your trusted partner.

📞 Call us at 1300 726 525
📧 Email: sales@multitorque.com
🌐 Visit our website
🔗 Connect on LinkedIn

Sludge management is one of the toughest challenges in industrial operations—thick, abrasive, and often corrosive, sludge requires a pump that won’t quit under pressure. That’s where an industrial sludge pump comes in.

From wastewater treatment to mining and food processing, industrial sludge pumps are essential for moving semi-solid materials efficiently and reliably. At MultiTorque, we supply and service robust sludge pumps designed for Australia’s harshest environments.

🔗 Visit MultiTorque Homepage
🔗 Connect with us on LinkedIn

Table of Contents

What Is an Industrial Sludge Pump?

An industrial sludge pump is a heavy-duty pump designed to handle thick, viscous, and abrasive fluids containing solids—commonly referred to as “sludge.” Unlike clean water or light chemicals, sludge presents unique challenges including:

High solid content
Variable viscosity
Corrosive or chemically reactive components
High wear and tear on pump components

Industrial sludge pumps are specifically engineered to withstand these factors, making them a critical component in sectors like mining, wastewater treatment, agriculture, and industrial processing.

Common Types of Industrial Sludge Pumps

At MultiTorque, we supply a variety of sludge pumps to meet different industrial needs. Each type offers unique benefits depending on the application.

🌀 Progressive Cavity Pumps

Ideal for handling viscous sludge and shear-sensitive fluids
Low pulsation and gentle transfer
Self-priming and suitable for variable flow conditions
Widely used in wastewater, oil, and chemical industries

🔁 Peristaltic (Hose) Pumps

No internal valves or seals—excellent for abrasive sludge
Self-priming and dry-run capable
Easy to clean and maintain
Common in chemical dosing and food waste applications

💨 Air Operated Double Diaphragm (AODD) Pumps

Excellent for portable or intermittent use
Handles thick sludges and slurries
Safe for explosive or hazardous areas
Popular in mining and remote site operations

🛠️ Submersible Sludge Pumps

Designed to be fully submerged
Ideal for pits, tanks, and confined spaces
Built with high wear-resistance for continuous duty

Where Are Industrial Sludge Pumps Used?

Sludge is produced in a wide range of industries—each with its own set of challenges. Here’s how industrial sludge pumps are applied across sectors:

Industry	Application Example
Mining	Tailings transfer, thickener underflow, slurry pumping
Wastewater Treatment	Sludge dewatering, grit removal, biosolid handling
Food Processing	Organic waste, mash transfer, high-viscosity fluids
Construction	Mud removal, excavation drainage, tunneling operations
Oil & Gas	Drilling mud, separator sludge, tank bottom cleanouts
Agriculture	Effluent pumping, manure handling, compost systems

At MultiTorque, we assess the specific needs of your operation—flow rate, solid content, pH levels, chemical compatibility—and recommend the right sludge pump for the job.

Key Features of a Good Industrial Sludge Pump

When dealing with sludge, not just any pump will do. Look for the following characteristics:

✅ Abrasion Resistance – Components like hardened impellers, ceramic linings, or elastomers protect against wear
✅ Seal Protection – Heavy-duty mechanical seals or seal-less designs reduce failure risk
✅ High Torque, Low Speed – Essential for pushing thick sludge without overheating or clogging
✅ Variable Flow Control – VSD compatibility allows for fine-tuned performance
✅ Easy Maintenance – Quick disassembly and spare part availability save valuable downtime

Custom Sludge Pump Systems from MultiTorque

Need a skid-mounted sludge pump with integrated controls? Or a trailer unit for mobile dewatering? We’ve got you covered.

Our in-house team of engineers and fabricators can build you a custom pumping solution, complete with:

Stainless steel pipework and housings
Explosion-proof motors (if required)
Variable speed drives and soft starters
Automated level and flow control systems
Telemetry for remote monitoring

Every site is different—and we tailor every system to match.

Maintenance & Servicing

Due to the aggressive nature of sludge, regular servicing is essential. MultiTorque offers:

🧰 Pump overhauls and rebuilds (in our Perth and Brisbane workshops)
🔁 Exchange programs to reduce lead times
🔍 On-site diagnostics and performance testing
📦 Genuine and aftermarket spare parts for major brands
🛡️ Preventative maintenance scheduling

We work with leading pump manufacturers including Netzsch, Wilden, Orbit, and more—backed by full support and documentation.

Why Choose MultiTorque?

We’re not just suppliers—we’re problem-solvers with real-world experience and a commitment to reliability.

🔧 15+ Years of Experience

We understand the harsh conditions of Australian industry and build pump systems to match.

🌏 National Coverage

With service hubs in Perth and Brisbane, we support operations across WA, QLD, and beyond.

⚙️ Custom Engineering

We don’t just sell pumps—we build systems that keep your plant flowing, no matter the conditions.

💬 Dedicated Support

From pre-sale consultation to after-sale servicing, we’re with you every step of the way.

Get a Sludge Pump That Gets the Job Done

If your current pump is struggling with blockages, leaks, or wear—it’s time to upgrade. Let MultiTorque help you spec, supply, and support a reliable industrial sludge pump built for your conditions.

📞 Call: 1300 726 525
📧 Email: sales@multitorque.com
🌐 www.multitorque.com.au
🔗 Follow us on LinkedIn

In industrial and commercial operations, the performance of your pump system directly affects your bottom line. From fluid transfer to wastewater management, dewatering to chemical processing—having the right equipment from trusted pumps companies is critical.

Australia is home to a number of reputable pump suppliers and service providers, but not all are created equal. That’s where MultiTorque stands out. With over 15 years of experience in the industry, we supply, service, and support high-quality pump systems across mining, agriculture, manufacturing, and energy sectors nationwide.

🔗 Visit MultiTorque Homepage
🔗 Connect with us on LinkedIn

Table of Contents

What Do Pumps Companies Do?

Pumps companies specialize in the supply, installation, maintenance, and customization of pumping systems for industrial and commercial use. Their services typically include:

Supplying new pumps and spare parts
Rebuilding and servicing existing units
Designing custom pump skid systems
On-site diagnostics and breakdown response
Providing technical support and compliance documentation

Whether you need a centrifugal pump for clean water or a positive displacement pump for viscous fluids, experienced pump companies help ensure performance, safety, and long-term reliability.

Key Industries That Rely on Pump Suppliers

Pumps companies like MultiTorque serve a broad range of industries across Australia. Here are some key sectors that depend on reliable pumping systems:

Industry	Pump Applications
Mining	Dewatering, slurry handling, chemical dosing
Agriculture	Irrigation, fertigation, borehole pumping
Food Processing	Sanitary transfer, CIP systems, dairy pumps
Water Treatment	Sewage, stormwater, greywater management
Manufacturing	Cooling, fluid transfer, lubrication
Oil & Gas	Fuel transfer, chemical injection
Construction	Site drainage, dust suppression

Every sector presents unique challenges—from harsh environmental conditions to strict hygiene requirements. That’s why working with a knowledgeable pump partner is essential.

What Sets Great Pumps Companies Apart?

Choosing from a long list of pumps companies isn’t just about price. It’s about long-term performance, support, and trust. Here are key traits that define reliable pump suppliers:

✅ Product Range & Technical Knowledge

Reputable pump companies supply a variety of pump types including:

Centrifugal pumps
Progressing cavity pumps
Rotary lobe pumps
Air operated diaphragm (AODD) pumps
Submersible and borehole pumps
Pneumatic and hydraulic starters

At MultiTorque, we not only stock proven brands like Wilden, Orbit, Netzsch, and Inoxpa—we also know how to install and maintain them properly.

✅ Full Lifecycle Support

From site evaluation and product selection to installation, service, and parts replacement—your pump supplier should be a one-stop shop.

MultiTorque offers:

On-site pump assessments
Custom fabrication of skids and mobile trailers
Preventative maintenance programs
Exchange programs and rebuild services

✅ Industry Certifications and Standards

Top pump companies ensure their systems meet Australian compliance standards for hygiene, safety, and environmental impact—especially in food, chemical, and wastewater applications.

Why MultiTorque Is a Trusted Name in Australia

We’re not just another name in the long list of pumps companies—we’re a full-service provider with a reputation for quality, innovation, and customer-first service.

🛠️ Engineering Expertise

With over 15 years in the industry, our team brings technical know-how and hands-on experience to every job.

🚛 National Reach

With facilities in Perth and Brisbane, we serve clients across WA, QLD, NSW, VIC and beyond.

⚙️ Custom Solutions

From mining skids to borehole pump trailers, we design and build equipment tailored to your environment and duty cycle.

🧩 Flexible Support

Need a pump fast? Want a spare parts kit delivered? Need us to diagnose a failing pump on site? We’re ready to respond.

How to Choose the Right Pumps Company

When evaluating potential pump suppliers, consider the following checklist:

Do they understand your industry and fluid type?
Can they supply pumps rated for your flow and pressure requirements?
Do they offer servicing, rebuilds, and technical support?
Are their products compliant with local standards?
Do they have spare parts or exchange pumps in stock?

If any of the answers are “no”—it’s time to consider switching.

Examples of Custom Projects

At MultiTorque, we’ve successfully delivered hundreds of custom pumping solutions, including:

BoreBoss mobile borehole testing skid: A stainless steel hydraulic pump trailer for a WA mine site
Dewatering pump skids: Built for remote mining operations in Queensland
Sanitary lobe pump system: Designed for a dairy client requiring CIP compatibility
Air starter motor builds: Supplied for diesel engine start-up in offshore rigs and large industrial vehicles

These projects reflect our ability to integrate control panels, VSDs, pipework, filtration, and remote start systems—giving clients everything they need in a turnkey package.

Brands We Work With

We supply and support parts and pumps from leading international manufacturers, including:

Wilden (AODD pumps)
Orbit (progressive cavity pumps)
Netzsch (chemical & industrial pumps)
Inoxpa (food-grade & sanitary pumps)
Flowserve, Sulzer, Napco, and more

Whether you need OEM parts or a reliable aftermarket alternative, we’ve got it.

Get in Touch with a Pump Partner That Delivers

If you’re searching for pumps companies you can count on, look no further than MultiTorque. We bring the experience, inventory, and flexibility to support your operation—whether you need a single pump or a custom-built solution for your entire site.

📞 Call: 1300 726 525
📧 Email: sales@multitorque.com
🌐 www.multitorque.com.au
🔗 Follow MultiTorque on LinkedIn

When it comes to moving large volumes of water, slurries, or wastewater, few tools are as effective and reliable as an industrial submersible water pump. Built to operate directly in the fluid being pumped, these rugged units are essential for mining, construction, wastewater treatment, and flood control operations across Australia.

At MultiTorque, we supply and service high-performance industrial submersible pumps tailored for harsh, demanding environments. Whether you’re dewatering a mine site, managing stormwater runoff, or handling industrial effluent, we’ve got a pump that’s built to last.

🔗 Visit MultiTorque Homepage
🔗 Follow us on LinkedIn

Table of Contents

What Is an Industrial Submersible Water Pump?

An industrial submersible water pump is a heavy-duty pumping unit designed to be fully submerged in the fluid it’s moving. Unlike surface pumps, submersibles push water up from within, using sealed motor technology that protects against liquid ingress and corrosion.

They are widely used for:

Dewatering underground mine sites and pits
Pumping slurry, wastewater, and process water
Emergency flood control
Construction site drainage
Sewage and effluent pumping
Agricultural water transfer and boreholes

Because the entire unit is submerged, these pumps offer quiet operation, strong suction, and reduced priming requirements.

Benefits of Industrial Submersible Water Pumps

Why choose a submersible over a traditional surface-mounted pump? Here’s what makes these units ideal for tough industrial tasks:

✅ Efficient Pumping from Depths
With no need to pull water up via suction, submersibles are far more efficient at handling deep-water applications.

✅ Self-Priming by Design
Submerged operation means no priming is required—saving time and reducing failure risks.

✅ Reduced Noise & Vibration
Perfect for noise-sensitive environments or operations near populated areas.

✅ Corrosion & Abrasion Resistant
Industrial-grade materials like stainless steel, cast iron, and polyurethane coatings allow for operation in aggressive fluids.

✅ Compact & Easy to Deploy
Portable models can be quickly dropped into pits, tanks, or excavations for fast water removal.

Common Types of Industrial Submersible Pumps

At MultiTorque, we supply a wide range of industrial submersible water pumps to match specific site conditions:

🟦 Drainage Submersible Pumps

Lightweight and compact
Ideal for clean or slightly dirty water
Used in construction, rainwater tanks, and portable dewatering

🟧 Slurry Submersible Pumps

Designed for abrasive solids and high-viscosity fluids
Features wear-resistant impellers and heavy-duty seals
Used in mining, tunneling, and dredging

🟥 Wastewater Submersible Pumps

Handles solids and fibrous materials
Used in sewage, effluent, and greywater systems
Common in wastewater treatment and food processing

⬛ Borehole Submersible Pumps

Long, narrow design for deep bore applications
Ideal for agricultural irrigation and remote site water supply
Energy-efficient and built for high-pressure output

Applications in Industrial Settings

Industrial submersible pumps are used in a wide range of applications across sectors in Australia:

Industry	Applications
Mining	Pit dewatering, tailings transfer, slurry pumping
Construction	Excavation drainage, rainwater removal
Municipal	Stormwater control, wastewater management
Agriculture	Borehole irrigation, tank transfer
Oil & Gas	Contaminated water handling, rig drainage
Food Processing	Washdown systems, greywater transfer

Each application requires a specific build and motor spec, which is why our team at MultiTorque provides tailored recommendations based on fluid properties, head height, and flow rate.

Key Features to Look For

When selecting an industrial submersible pump, consider the following:

Material Compatibility – Stainless steel for corrosive fluids; cast iron for durability
Impeller Type – Vortex, open channel, or semi-open depending on solids content
Power Requirements – Single-phase or three-phase motor
Flow & Head Rating – Match to system needs to avoid cavitation or burnout
Sealing System – Double mechanical seals or oil-filled chambers for protection
Portability – Lifting handles or integrated floats for ease of deployment

MultiTorque offers models from leading manufacturers and provides servicing to keep your system running without downtime.

Maintenance and Servicing

Like any critical equipment, industrial submersible pumps require regular care to perform at their best.

Our MultiTorque services include:

🧰 Full pump inspections and diagnostics
🔧 Repairs and overhauls (on-site or in our Perth and Brisbane workshops)
🔁 Exchange pumps to reduce downtime
🛠️ Spare parts sourcing for brands like Wilden, Orbit, Netzsch, and more
📋 Preventative maintenance scheduling and asset tracking

We ensure your pumps are compliant, efficient, and ready for whatever conditions your site throws at them.

Custom Solutions from MultiTorque

Need a submersible pump skid or fully integrated pumping system? We’ve got you covered.

We design and build:

Trailer-mounted submersible units
Solar-powered off-grid systems
Control panels with VSD integration
Level sensors and automatic float systems
Stainless steel or powder-coated enclosures for protection

Whether you’re working in remote WA mining regions or flood-prone Queensland areas, our team can engineer the ideal solution.

Why Choose MultiTorque?

💡 Expert Advice
Over 15 years of hands-on experience supplying industrial pump systems in Australia.

🛠️ Full Support
From selection and delivery to servicing and upgrades, we’ve got your back.

🚚 Fast National Delivery
Warehouses in Perth and Brisbane mean shorter lead times and local support.

🔗 Trusted Brands
We supply top-performing industrial submersible water pumps backed by warranties and ongoing support.

Get Pumped with MultiTorque

If your operation needs a tough, high-performance industrial submersible water pump, look no further than MultiTorque. From clean water to abrasive slurry, we’ll help you find the right pump to keep your site running smoothly.

📞 Call: 1300 726 525
📧 Email: sales@multitorque.com
🌐 Visit: www.multitorque.com.au
🔗 Connect with us on LinkedIn

Industrial Submersible Water Pumps

Across industrial Australia, machinery of all kinds—from mining equipment to food processing systems—relies on one thing to keep moving: pumps. A machinery pump is the heart of any system that needs to move fluids efficiently and reliably. Whether you’re working with water, chemicals, slurries, or oil, the right pump makes all the difference in safety, performance, and cost.

At MultiTorque, we provide, service, and customise high-performance machinery pumps built for Australian conditions. From agriculture and manufacturing to heavy-duty mining operations, we’ve been supplying quality pump solutions for over 15 years.

🔗 Visit MultiTorque Homepage
🔗 Follow us on LinkedIn

Table of Contents

What Is a Machinery Pump?

A machinery pump is any type of pump used within a machine or as a standalone unit to facilitate the movement of liquids or slurries. These pumps are essential in:

Fluid transfer systems
Hydraulic machinery
Lubrication and cooling systems
Irrigation and wastewater plants
Mining and dewatering systems
Processing and production lines

Machinery pumps are designed to handle high pressures, abrasive materials, temperature extremes, and demanding operating schedules—especially in Australia’s harsh climates.

Types of Machinery Pumps

At MultiTorque, we offer a wide range of pump types suited for different machines and applications:

🌀 Centrifugal Pumps

Best for high-flow, low-viscosity fluids like clean water
Common in HVAC, irrigation, and processing lines
Easy to install and maintain

🔁 Positive Displacement Pumps

Includes rotary lobe, gear, screw, and progressing cavity pumps
Handles viscous or shear-sensitive fluids like oils, pastes, and chemicals
Ideal for food, mining, and chemical industries

💨 Air Operated Diaphragm (AODD) Pumps

Self-priming, dry-run capable, explosion-safe
Excellent for transferring slurries, solvents, and sensitive materials
Used in portable or remote site machinery

🛠️ Hydraulic and Pneumatic Pumps

Power specific mechanical functions or tools
Found in mobile equipment, drill rigs, and industrial presses
High power-to-weight ratio

🔩 Self-Priming and Submersible Pumps

Great for sump, dewatering, and surface water transfer
Durable in flood zones and excavation sites
Built to run in remote or hard-to-access machinery

Applications of Machinery Pumps

MultiTorque’s machinery pumps are trusted across sectors, including:

Industry	Machinery Pump Uses
Mining	Slurry transfer, dust suppression, dewatering
Agriculture	Fertiliser handling, irrigation, livestock use
Food & Beverage	Ingredient transfer, washdown systems
Oil & Gas	Lubrication, fuel transfer, chemical dosing
Construction	Groundwater control, concrete additives
Manufacturing	Cooling systems, chemical processing

Every system is different, which is why we work closely with you to spec the right pump—whether it’s for heavy-duty machinery, mobile equipment, or stationary plant operations.

Benefits of High-Quality Machinery Pumps

✅ Durability
Built with tough materials like stainless steel, cast iron, or polymer coatings to withstand abrasion, corrosion, and pressure.

✅ Efficiency
Modern machinery pumps are engineered for maximum flow with minimal energy consumption—cutting your power bills without sacrificing performance.

✅ Precision
Many systems require accurate flow control, especially for batching or chemical dosing. Our pumps deliver consistent, reliable results.

✅ Low Maintenance
Well-built machinery pumps mean fewer breakdowns, longer service intervals, and lower lifetime cost of ownership.

✅ Australian Compliance
Our pumps are compatible with Australian safety, hygiene, and environmental regulations across sectors.

Custom Machinery Pump Systems

Some machines need more than just a basic pump—they need a complete, integrated system. That’s where MultiTorque excels.

We design and fabricate custom pump skids and mobile units including:

Control panels with variable speed drives (VSD)
Trailer or skid mounting
Integrated filtration, valves, and pipework
Remote start/stop and telemetry systems
Stainless steel builds for food or chemical applications

Whether you’re building a new plant, upgrading machinery, or replacing an old system, we can tailor a solution to match your budget and flow requirements.

Maintenance & Support Services

Downtime is the enemy of productivity. That’s why we provide full-service support for machinery pumps:

🔧 Repairs and rebuilds (on-site or in our Perth and Brisbane workshops)
🔁 Exchange programs to reduce lead times
📦 Spare parts for major brands like Wilden, Inoxpa, Orbit, and Netzsch
🔍 Preventive maintenance scheduling

Our technicians know the importance of fast, reliable turnaround times—especially when your pump is critical to daily operations.

Why Choose MultiTorque?

We’re not just a supplier. We’re a partner in performance.

💡 Engineering Expertise
Over 15 years helping industries solve complex fluid handling problems.

🛠️ Custom Design & Fabrication
Need a pump system built for your exact machine? We’ve got you covered.

🚛 Australia-Wide Service
With branches in Perth and Brisbane, we ship and support across the country.

🤝 Reliable Brands & Stock
We supply only proven machinery pump brands with full warranty and spare part backing.

Let’s Keep Your Machines Moving

If your machinery relies on pumps, don’t settle for second-best. Let MultiTorque supply the right machinery pump to keep your system flowing—efficiently, reliably, and safely.

📞 Call: 1300 726 525
📧 Email: sales@multitorque.com
🌐 www.multitorque.com.au
🔗 Follow us on LinkedIn

In demanding environments where reliability and hygiene are essential, stainless steel water pumps are the go-to solution for industries across Australia. These pumps offer corrosion resistance, high performance, and longevity—making them ideal for everything from food processing and chemical transfer to wastewater management and agricultural use.

At MultiTorque, we supply, service, and support high-quality stainless steel water pumps designed for industrial performance. Whether you’re pumping clean water, corrosive chemicals, or food-grade liquids, our range of stainless steel pumps is engineered to handle the toughest jobs while meeting compliance and safety standards.

🔗 Visit MultiTorque Homepage
🔗 Follow us on LinkedIn

Table of Contents

What Is a Stainless Steel Water Pump?

A stainless steel water pump is a pumping system constructed with stainless steel—typically 304 or 316 grade—for all wetted parts. This material is highly resistant to corrosion, rust, and chemical damage, making it perfect for:

Aggressive fluids
Hygienic environments
Outdoor or marine applications
High-pressure, high-temperature systems

Stainless steel pumps are commonly used in industries where standard cast iron or plastic components would degrade quickly.

Applications of Stainless Steel Water Pumps

Stainless steel pumps are versatile and used across a wide range of sectors in Australia:

🥛 Food & Beverage

Used in dairy processing, breweries, and food manufacturing
Maintains hygiene and prevents contamination
Compatible with CIP (Clean-in-Place) systems

⚗️ Chemical Processing

Handles acidic, caustic, or solvent-based fluids
Resists corrosion and chemical wear
Suitable for precise dosing or transfer

🌊 Water Treatment

Ideal for potable water, greywater, and desalination
Long service life in chlorine or saltwater exposure

🚜 Agriculture & Irrigation

Withstands outdoor elements
Great for fertilizer transfer or borehole water pumping

🏗️ Industrial & Mining

Transfers slurries, process water, and corrosive fluids
Stainless impellers and seals enhance wear resistance

No matter the application, MultiTorque can help select the ideal stainless steel water pump for the job.

Benefits of Stainless Steel Water Pumps

Why choose stainless steel over traditional pump materials?

✅ Corrosion Resistance
Perfect for saltwater, chlorinated water, and chemical exposure. 316-grade stainless steel offers superior resistance to harsh environments.

✅ Hygienic & Food-Safe
Smooth, crevice-free surfaces make stainless pumps ideal for food and beverage use. Many meet FDA, 3A, or EHEDG standards.

✅ Long Service Life
Stainless steel doesn’t rust, pit, or degrade like cast iron or plastic alternatives. This reduces replacement costs and downtime.

✅ Temperature & Pressure Tolerance
Works well in high-heat or high-pressure systems, such as industrial boilers or chemical plants.

✅ Low Maintenance
Fewer breakdowns and less need for internal coatings or protective linings.

Pump Types Available in Stainless Steel

At MultiTorque, we offer a wide variety of stainless steel water pump types, including:

🌀 Centrifugal Stainless Steel Pumps

High flow rates for low-viscosity fluids
Suitable for clean water, CIP systems, and beverage processing
Often used in dairy, brewing, and chemical dosing

🔁 Positive Displacement Stainless Pumps

Includes gear, rotary lobe, and progressive cavity pumps
Great for viscous fluids or shear-sensitive products
Used in food, cosmetic, and pharmaceutical sectors

💨 Stainless Diaphragm (AODD) Pumps

Air-operated for use in hazardous or explosive areas
Handles slurries, chemicals, or wastewater
Low shear and dry-run capable

🔧 Self-Priming Pumps

Stainless steel versions available for marine and washdown systems
Ideal for applications where dry suction is required

Our experts can guide you through the selection process and help you choose a pump that suits your flow, pressure, and material requirements.

Maintenance & Lifespan

While stainless steel pumps require less maintenance than iron or alloy-based systems, regular checks still ensure longevity.

Tips for maintenance:

Clean and inspect seals regularly
Avoid cavitation or dry running unless rated for it
Replace gaskets and O-rings as per manufacturer guidelines
Flush systems thoroughly if transferring aggressive chemicals

At MultiTorque, we provide rebuilds, spare parts, and exchange services to keep your pumps running in peak condition.

Custom-Built Stainless Steel Solutions

Need something specific? We can design and fabricate custom pump skids, stainless steel trailers, or mobile pumping units tailored to your site.

Popular features include:

Food-grade control panels
Variable speed drives
CIP/SIP compatibility
Stainless steel manifolds and hose reels
Trailer-mounted systems for mobile water treatment

Whether you’re on a mine site, farm, or processing plant, we’ll design the right setup for your workflow.

Why MultiTorque?

When it comes to stainless steel water pumps, we bring more than just parts—we bring full-service support.

🔩 End-to-End Expertise
From consultation to commissioning, we handle it all.

📦 National Delivery
From our Perth and Brisbane branches, we ship and support customers across Australia.

🛠️ Service & Support
We offer pump diagnostics, on-site repairs, and full rebuilds—no delays, no fuss.

🔗 Trusted Brands
We work with industry leaders like Wilden, Inoxpa, Netzsch, and Orbit—delivering proven performance and compliance.

Need a Stainless Steel Pump? Let’s Talk.

MultiTorque is your trusted supplier for stainless steel water pumps that perform under pressure. Whether you need a pump for food-grade transfer, chemical dosing, or high-corrosion environments, we’ve got a solution for you.

📞 Call: 1300 726 525
📧 Email: sales@multitorque.com
🌐 www.multitorque.com.au
🔗 Follow us on LinkedIn

In every industrial application—from mining and manufacturing to agriculture and food processing—industry pumps play a vital role in maintaining flow, pressure, and production efficiency. Selecting the right pump not only improves system performance but also reduces energy use, unplanned downtime, and maintenance costs.

At MultiTorque, we supply, service, and support a wide range of industry pumps for demanding environments. With over 15 years of experience working with businesses across Australia, our team understands that reliability, safety, and performance come first.

🔗 Visit MultiTorque Homepage
🔗 Follow us on LinkedIn

Table of Contents

What Are Industry Pumps?

Industry pumps refer to a wide category of mechanical devices used to move liquids, slurries, or gases in various industrial applications. These pumps are engineered to handle different types of fluids, including abrasive slurries, viscous liquids, corrosive chemicals, and high-temperature fluids.

They are used in key sectors such as:

Mining and dewatering
Oil & gas
Agriculture and irrigation
Water and wastewater management
Food and beverage processing
Manufacturing and chemical processing
Construction and civil infrastructure

Types of Industry Pumps We Supply

At MultiTorque, we offer a broad selection of industrial pumps to meet your site-specific flow, pressure, and material compatibility requirements.

🌀 Centrifugal Pumps

Ideal for clean water and low-viscosity liquids
Common in irrigation, water treatment, and HVAC systems
High flow rates with relatively low pressure
Available in horizontal, vertical, and submersible variants

🔁 Positive Displacement Pumps

Includes gear, diaphragm, screw, rotary lobe, and progressing cavity pumps
Ideal for thick, abrasive, or shear-sensitive fluids
Maintains a consistent flow regardless of system pressure
Common in chemical, food, and oil industries

💨 Air-Operated Diaphragm (AODD) Pumps

Self-priming and dry-run capable
Great for portable setups and explosive environments
Used in mining, chemical transfer, and food-grade processes

⚙️ Progressing Cavity Pumps

Excellent for viscous fluids, slurries, or solids-laden media
Gentle, low-pulse flow
Popular in wastewater, oil sludge, and food industries

🔧 Pump Skids and Custom Units

Fully integrated units with controls, frames, and pipework
Designed and built in-house to match site specifications
Portable or stationary builds for dewatering, chemical dosing, or transfer

Benefits of Using High-Quality Industry Pumps

When you invest in the right industry pump, you gain:

✅ System Reliability – Fewer breakdowns and shutdowns
✅ Efficiency – Reduced power consumption and increased productivity
✅ Longevity – Heavy-duty designs built for harsh Australian conditions
✅ Compatibility – Chemical- and abrasion-resistant materials to match your fluid
✅ Compliance – Pumps that meet relevant Australian and global standards

Industry Applications We Serve

Our pump solutions support critical infrastructure in:

Industry	Pump Applications
Mining	Dewatering, slurry handling, reagent dosing
Oil & Gas	Fuel transfer, chemical injection, compressor starters
Agriculture	Irrigation, fertilizer pumping, livestock watering
Food & Beverage	Dairy, beverage, sauce, and CIP system pumps
Manufacturing	Cooling systems, chemical processing, pressure boosting
Water Treatment	Filtration, dosing, sludge and wastewater transfer

Whether it’s a rugged dewatering setup or a sanitary food-grade pump, MultiTorque has the inventory and expertise to deliver.

Maintenance and Service Support

Breakdowns in pump systems can lead to serious production losses. That’s why MultiTorque offers:

🔧 Onsite repairs and emergency breakdown support
🔁 Service exchange units to reduce downtime
🛠️ Pump rebuilds and overhauls in our Perth and Brisbane workshops
📦 Spare parts for major brands like Netzsch, Wilden, Inoxpa, and Orbit
📋 Preventative maintenance schedules tailored to your site

Our technicians work with your team to ensure your system runs smoothly year-round.

Why Choose MultiTorque for Industry Pumps?

💡 Expertise Across Sectors
We understand the unique needs of mining, food processing, water, and agricultural businesses.

🧰 Custom Engineering
Need a special skid setup or retrofitted solution? We build pump systems that match your exact requirements.

🚛 Fast Dispatch & Support
With locations in Perth and Brisbane, we offer rapid delivery and service nationwide.

🔩 Parts, Pumps & People
From sourcing the right model to training your team, we’re more than just a supplier—we’re your partner in flow.

Choosing the Right Industry Pump

When selecting a pump, consider:

Fluid Type – Is it abrasive, corrosive, thick, or sanitary?
Flow Rate & Head – What are your operating conditions?
Power Source – Electric, diesel, air, or hydraulic?
Mounting – Is the pump portable, skid-mounted, or fixed?
Environment – Indoor, outdoor, explosive zones?

Not sure where to start? Contact our team and we’ll spec the right pump with performance, safety, and cost in mind.

Let’s Get Your System Flowing

From high-pressure centrifugal systems to heavy-duty diaphragm units, MultiTorque supplies industry pumps built to last. Whether you’re upgrading a single unit or outfitting an entire facility, we can design and deliver the right solution.

📞 Call: 1300 726 525
📧 Email: sales@multitorque.com
🌐 Visit: www.multitorque.com.au
🔗 Follow us on LinkedIn

In the food and beverage industry, product integrity is everything. Whether you’re moving milk, syrup, sauces, or oils, choosing the right food transfer pump is critical for maintaining hygiene, minimizing waste, and ensuring consistent flow throughout production.

At MultiTorque, we supply and service high-performance food transfer pumps tailored to the unique needs of Australia’s food processors. From dairy to bakery, beverage to meat production, our pumps are built to handle food-grade applications with precision, safety, and reliability.

🔗 Visit MultiTorque Homepage
🔗 Follow us on LinkedIn

Table of Contents

What Is a Food Transfer Pump?

A food transfer pump is a sanitary, food-grade pump specifically designed to move liquid or semi-solid food products safely and efficiently. These pumps must comply with food safety standards such as:

FDA, EHEDG, and 3A certifications
316L stainless steel construction for all wetted parts
Smooth, crevice-free internal surfaces to prevent bacterial growth
CIP (Clean-in-Place) / SIP (Sterilize-in-Place) compatibility

Whether you’re handling thick sauces, delicate dairy, or viscous batters, the right pump ensures product quality is preserved from start to finish.

Why Use a Food Transfer Pump?

Standard industrial pumps can damage food product, introduce contaminants, or fall short of regulatory standards. A food transfer pump is engineered for:

✅ Hygienic Transfer – All parts in contact with food are sanitary-grade
✅ Low Shear Movement – Maintains product texture and composition
✅ Easy Cleaning – Quick disassembly or integrated CIP for compliance
✅ Versatility – Handles everything from water-thin liquids to chunky fluids
✅ Efficiency – Reduces downtime, spillage, and waste in your line

Common Applications in Food Processing

Food transfer pumps are used in almost every sector of food manufacturing, including:

🥛 Dairy Processing – Milk, cream, yoghurt, whey
🧃 Beverages – Juices, concentrates, alcohol, syrups
🍯 Condiments & Sauces – Ketchup, mayonnaise, mustard, gravies
🧁 Bakery & Confectionery – Doughs, glazes, fillings, chocolate
🥫 Meat & Poultry – Slurries, broths, brines
🧽 CIP Fluids – Sanitizing chemicals for internal washdown

At MultiTorque, we supply food transfer pump solutions for each of these stages, including portable pump carts, fixed installations, and automated CIP-compatible systems.

Top Pump Types for Food Transfer

Choosing the right type of pump depends on product consistency, temperature, flow requirements, and cleaning needs.

🌀 Centrifugal Pumps

Ideal for low-viscosity fluids (e.g. milk, juice, brine)
High flow, low pressure
Easy to clean with minimal maintenance
Common in beverage and dairy lines

🔄 Rotary Lobe Pumps

Low shear, excellent for fragile or viscous products
Perfect for sauces, yoghurt, purees, and chunky mixtures
Self-priming and reversible
Common in bakery and sauce production

💨 Double Diaphragm (AODD) Pumps

Self-priming and dry-run capable
Can handle solids, slurries, or delicate fluids
Portable and great for cleaning applications
Used in small plants and tank transfers

🦾 Progressing Cavity Pumps

Gentle, continuous flow for thick or particulate fluids
Used in fillings, batter, mashed foods, and pastes
High accuracy in metering and dosing applications

MultiTorque offers all of the above—complete with fittings, mounts, and food-grade certification.

Key Features to Look For

Feature	Why It Matters
316L Stainless Steel	Non-corrosive, food-safe material for wetted parts
Tri-Clamp Connections	Easy removal for cleaning and reassembly
FDA/EHEDG-Approved Elastomers	Prevent contamination and ensure compliance
Low Shear Operation	Maintains product consistency and prevents foaming
CIP/SIP Compatibility	Reduces downtime and ensures sanitary cycles
Variable Speed Control	Adjust flow for batching, dosing, or product viscosity

At MultiTorque, we help you choose a model that fits your line’s hygiene and production standards.

Trusted Brands We Supply

We source and support pumps from world-leading food-grade manufacturers, including:

Inoxpa – Specialists in hygienic centrifugal and lobe pumps
Wilden – Reliable air-operated diaphragm pumps with sanitary options
Netzsch – Progressing cavity pumps for high-viscosity food processing
Graco – Diaphragm pumps with precision dosing and portable options

Need a specific model, spare parts, or rebuild kits? MultiTorque can help spec, source, and ship to your site quickly from our Perth and Brisbane branches.

Why Choose MultiTorque?

🛠️ Tailored Solutions
We spec, supply, and install pumps to suit your product type, flow rate, and hygiene standards.

🔧 Servicing & Repairs
We provide in-house and onsite servicing across Australia for all major pump brands.

📦 Parts & Spares
Diaphragms, seals, motors, clamps—we stock all the essentials to reduce downtime.

📈 Custom Builds
Need a portable pump cart, control integration, or CIP loop? We’ll design and deliver it.

Food Pump Maintenance Tips

✅ Clean immediately after each production cycle
✅ Replace diaphragms and seals on schedule
✅ Avoid running pumps dry (unless rated for it)
✅ Check for cavitation or flow inconsistencies
✅ Partner with MultiTorque for annual servicing

Talk to the Food Pump Experts

Looking for a hygienic, durable, and efficient food transfer pump? MultiTorque has the parts, pumps, and expertise to keep your line running—whether you process dairy, sauce, syrup, or soup.

📞 Call: 1300 726 525
📧 Email: sales@multitorque.com
🌐 Visit: www.multitorque.com.au
🔗 Follow us on LinkedIn