For heavy-duty industrial engines, startup reliability is critical. Whether powering up offshore rigs, emergency generators, or mobile gas compression systems, a dependable gas turbine starter is essential. At MultiTorque, we specialise in supplying, servicing, and rebuilding high-performance gas turbine starters across Australia.

With over 15 years of experience in the industrial and energy sectors, MultiTorque delivers robust, field-proven solutions—backed by full workshop support in both Perth and Brisbane.

What Is a Gas Turbine Starter?

A gas turbine starter is a mechanical or air-powered unit designed to initiate rotation in large turbine engines until the engine reaches self-sustaining speed. These starters are essential in systems where traditional electric starters are impractical due to high torque demands, volatile environments, or lack of onboard electricity.

The most common and reliable type of gas turbine starter is the air turbine starter, which uses compressed air to drive a high-speed turbine connected to the engine shaft.

Why Choose an Air-Powered Gas Turbine Starter?

Air-powered turbine starters have several key advantages:

No electrical components, making them explosion-proof and safe for hazardous zones
Lightweight, compact, and reliable
Low maintenance with minimal moving parts
Rapid cold starts, even in remote or extreme conditions

These features make them ideal for operations in mining, power generation, oil & gas, and marine environments.

MultiTorque’s Gas Turbine Starter Range

MultiTorque offers access to industry-leading brands and models, including:

TDI (TurboTwin T100, T50, and T25 models)
Startmaster and Powerstart starters
Ingersoll Rand air starters

We also provide service exchange units—enabling you to swap your faulty gas turbine starter for a fully refurbished unit tested and ready to perform.

Explore our full range of air and gas starters here:
🔗 https://www.multitorque.com.au/air-motor-starters

Applications of Gas Turbine Starters

MultiTorque’s gas turbine starters are widely used in:

Mobile and skid-mounted gas compression units
Standby and continuous power generation systems
Oil & gas field equipment
Marine and offshore support vessels
Aviation ground equipment (GSE)

If you operate in a remote location or volatile environment, a high-torque air starter is often your most reliable option.

Service & Support You Can Trust

MultiTorque is not just a supplier—we’re your maintenance partner. Our workshops are equipped to:

Fully overhaul and test gas turbine starters
Replace worn or damaged components with genuine or aftermarket parts
Conduct diagnostics, repairs, and performance testing
Offer fast turnaround and emergency support

With locations in Perth and Brisbane, we provide local support with national reach.

Why Choose MultiTorque?

✅ Australian-owned with over 15 years of industrial expertise
✅ In-depth knowledge of turbine starter systems
✅ Service exchange for minimal downtime
✅ Nationwide shipping on parts and refurbished units
✅ Real technical support—no fluff, no delays

Your equipment depends on the right starter. MultiTorque ensures you have it.

🔧 Contact Us Today

If you need a new gas turbine starter, service, or replacement parts—MultiTorque is your go-to supplier. Get fast quotes, expert support, and dependable solutions from a team that understands your industry.

📞 Phone: 1300 726 525
📧 Email: sales@multitorque.com
🌐 Website: www.multitorque.com.au
🔗 LinkedIn: MultiTorque on LinkedIn

Don’t risk startup failure—contact MultiTorque today and power your operation with confidence.

Starting a gas turbine engine requires precision, power, and reliability. That’s where a gas turbine engine starter comes into play—delivering the initial rotational energy needed to ignite high-performance engines in critical applications. At MultiTorque, we specialise in supplying, servicing, and refurbishing air starters and parts for gas turbine engines across Australia.

Whether you’re in mining, power generation, or oil & gas, MultiTorque has the experience and the inventory to keep your operation moving.

What Is a Gas Turbine Engine Starter?

A gas turbine engine starter is a mechanical device designed to spin up a turbine engine to a self-sustaining speed using external energy—most commonly from compressed air. It initiates the ignition sequence in heavy-duty gas turbines used in applications like power plants, gas compression stations, and offshore platforms.

There are different types of turbine starters, but air turbine starters are especially valued for their simplicity, durability, and ability to operate in explosive or remote environments without electrical components.

Benefits of a Gas Turbine Engine Starter

At MultiTorque, we understand the harsh conditions Australian industries face. That’s why we stock gas turbine engine starters that are:

Explosion-proof and ATEX-rated
Reliable in extreme temperatures and humidity
Low-maintenance with fewer moving parts
Lightweight with high torque output

We supply starters that are compatible with top-end engines and industrial turbines, providing a safe and efficient solution for remote startups and mission-critical applications.

Our Starter Brands and Solutions

MultiTorque proudly sources and services gas turbine engine starters from global leaders, including:

TDI (TurboTwin, T100, T50, and T25 models)
Ingersoll Rand air starters
Startmaster and Powerstart air starter units

We also offer customised service exchange units to help you reduce downtime—swap out your failed unit for a fully refurbished one tested to OEM spec.

🔗 Learn more about our air starter solutions here:
https://www.multitorque.com.au/air-motor-starters

Applications Across Industries

Our gas turbine engine starters are trusted in industries where failure is not an option:

Power generation turbines
Gas compression systems
Marine propulsion units
Oil & gas drilling platforms
Emergency backup generators

From Queensland to WA, MultiTorque supports critical infrastructure with starter systems that perform when it matters most.

Service, Repairs, and Spare Parts

MultiTorque is more than just a supplier—we’re your full-service partner. Our expert team offers:

In-house repairs and testing
Full starter overhauls
Genuine and aftermarket parts
Emergency troubleshooting
Express nationwide shipping

Got a worn or unreliable starter? Send it in—we’ll rebuild and test it in our Perth or Brisbane workshop, fast.

Why MultiTorque?

✅ 15+ years of experience in industrial starting systems
✅ Australian-owned and operated
✅ Workshops on both coasts
✅ Reliable, fast turnaround on repairs and exchanges
✅ Technical support tailored to your industry

We’re not just moving parts—we’re keeping industries running.

🔧 Get in Touch Today

Need a reliable gas turbine engine starter solution? Want a quote on parts or service? Contact MultiTorque now and experience the difference.

📞 Phone: 1300 726 525
📧 Email: sales@multitorque.com
🌐 Website: www.multitorque.com.au
🔗 LinkedIn: Follow us on LinkedIn

Let’s get your turbine powered up—the right way.

When it comes to starting large diesel or gas engines, especially in harsh or hazardous environments, nothing beats the reliability of a turbine air starter. At MultiTorque, we supply, service, and repair high-performance air starters across Australia—including turbine, vane, and piston-style models. Whether you’re running compressors, offshore rigs, power generation units, or mining equipment, our solutions are built to last.

What Is a Turbine Air Starter?

A turbine air starter is a type of air-driven motor used to crank heavy engines. Instead of using a traditional electric starter, turbine air starters harness compressed air or gas to spin a turbine wheel, which generates torque and starts the engine. They’re ideal for applications requiring reliable cold starts, minimal maintenance, and high power in remote or explosive environments.

Compared to electric or vane starters, turbine models offer distinct advantages:

No need for electricity (perfect for explosive environments)
Longer service intervals
High torque-to-weight ratio
Corrosion resistance

Why Choose MultiTorque for Turbine Air Starters?

MultiTorque has over 15 years of experience supplying rugged, dependable starter solutions to Australia’s mining, oil & gas, and industrial sectors. When you buy or service a turbine air starter through us, you’re backed by expert support, a national footprint, and rapid turnaround.

We stock and source units and parts from top global brands like:

TDI (TurboTwin, T100-B, T50, and T25 starters)
Ingersoll Rand
Startmaster
Powerstart

We also offer service exchange options—meaning you can swap your faulty unit for a fully refurbished one, reducing your downtime dramatically.

Explore our starter range here:
🔗 https://www.multitorque.com.au/air-motor-starters

Applications Across Industries

Turbine air starters are essential for equipment operating in critical sectors:

Mining and Resources – Haul trucks, generators, loaders
Oil & Gas – Drill rigs, compressors, offshore skids
Power Generation – Emergency generator sets
Marine and Offshore – Engines in enclosed, explosive zones

MultiTorque’s solutions are built for extreme heat, dust, humidity, and vibration—making them ideal for Australia’s demanding worksites.

Air Starter Services We Offer

We don’t just sell turbine air starters—we also:

Service and overhaul starters in our Perth and Brisbane workshops
Offer genuine and aftermarket parts
Refurbish and test units to OEM specifications
Provide onsite support and consultation
Facilitate express shipping nationwide

Got an old or underperforming unit? We’ll refurbish it to like-new condition, test it in our facility, and get it back to you fast—backed by warranty.

📞 Need a quick quote or urgent support?
Call us on 1300 726 525 or email sales@multitorque.com.

Signs You May Need a New or Serviced Turbine Air Starter

Hard engine starts or sluggish cranking
Leaks or damaged housings
Visible wear on turbine components
Loss of torque
Increased air pressure requirements

If you’re noticing any of these, contact MultiTorque for a fast assessment.

📞 Contact MultiTorque Today

Whether you’re after a new turbine air starter, a fast rebuild, or hard-to-find parts—we’ve got you covered. Our expert team is ready to help with quick turnarounds, national delivery, and unbeatable industry knowledge.

🔧 Services we offer:

Turbine air starter supply, service, and repair
Full-service exchange program
Genuine & aftermarket parts in stock
Workshops in Perth & Brisbane
Fast Australia-wide shipping

📍 MultiTorque Contact Details:
Phone: 1300 726 525
Email: sales@multitorque.com
Website: www.multitorque.com.au
LinkedIn: Follow us on LinkedIn

Don’t let a bad starter hold you back—get in touch today and keep your machines moving.

When reliability, power, and performance matter most, a turbine engine starter delivers. Used in high-demand environments like oil & gas, mining, marine, and power generation, these starters offer rugged durability and high torque to crank large diesel and gas engines without fail.

At MultiTorque, we are proud to supply, service, and support a wide range of turbine engine starter systems across Australia. Whether you’re replacing an existing unit or upgrading to a more robust solution, our team is ready to help you choose the right starter for your needs.

What Is a Turbine Engine Starter?

A turbine engine starter is a compressed air-driven device that uses a turbine rotor to generate mechanical power for engine cranking. Unlike electric or vane-type starters, turbine starters rely on the rotational energy of air- or gas-powered turbines, which are highly efficient and have fewer moving parts.

They are commonly installed on:

Large industrial diesel engines
Marine propulsion systems
Gas compressors
Backup generators
Mining trucks and rigs
Oilfield equipment

Turbine engine starters are built to operate in the most hostile conditions, delivering reliable starts even in extreme environments.

Advantages of Using a Turbine Engine Starter

✅ Unmatched Reliability

Turbine starters are known for their reliability due to their simple, rugged design. With no brushes, vanes, or complex gears, there’s less to wear out and fail.

✅ High Torque Output

Turbine engine starters provide massive starting torque, which is crucial when starting large-displacement engines—especially in cold climates or under load.

✅ Lightweight and Compact

Despite their power, turbine starters are smaller and lighter than electric or hydraulic alternatives, making them easier to install and maintain.

✅ Minimal Maintenance

With fewer internal components, turbine engine starters require less frequent maintenance and can run longer between service intervals.

✅ Safe in Hazardous Environments

They’re ideal for explosive or flammable zones because they don’t rely on electrical currents, eliminating spark risks.

MultiTorque: Your Turbine Engine Starter Partner

At MultiTorque, we offer complete support for turbine engine starters, including:

Supply of new starters (TDI TurboTwin, and other leading models)
Full in-house repair & refurbishment
Service exchange units for quick swaps
Genuine OEM parts and accessories

We work with major industrial clients across Australia, from Perth to Brisbane and everywhere in between.

Explore Our Starters

Service Exchange and Repairs

Our service exchange program ensures you’re never left waiting. Send us your used or damaged turbine engine starter and receive a refurbished, performance-tested replacement—fast.

If you’d rather repair your current unit, our in-house team offers:

Full strip and clean
Rotor balancing
Replacement of seals, bearings, and gaskets
Pressure and performance testing

Visit our Air Starter Repair Services Page for more info.

Industries That Trust Turbine Engine Starters

MultiTorque supports customers across a wide range of sectors:

Mining: Haul trucks, generators, and blast hole drills
Oil & Gas: Rig engines, compressors, and emergency systems
Marine: Ship engines and auxiliary power units
Power Generation: Emergency diesel generator startup
Rail and Transport: Locomotive engines and yard power units

Wherever heavy-duty engines are used, turbine engine starters provide the power to get them moving.

Contact MultiTorque Today

Need help selecting or servicing a turbine engine starter? Our expert team is just a call or click away.

📞 1300 726 525
📧 sales@multitorque.com
🌐 www.multitorque.com.au
🔗 Follow us on LinkedIn

We deliver nationwide and pride ourselves on reliable service, expert knowledge, and fast turnaround.

If you’re operating heavy-duty engines in mining, oil & gas, power generation, or transport, choosing the right engine starting solution is vital. Among the most reliable systems available today is the turbine starter. Known for their durability, power, and low maintenance, turbine starters are ideal for critical equipment where failure is not an option.

At MultiTorque, we proudly supply, service, and repair turbine starters across Australia—offering complete support for TDI TurboTwin and other leading air starter brands.

What Is a Turbine Starter?

A turbine starter, also referred to as an air turbine starter, is a type of engine starter that uses compressed air to drive a turbine wheel. This turbine then delivers high torque to start diesel or gas-powered engines. Unlike traditional vane starters, turbine starters feature fewer moving parts, making them incredibly robust and efficient in harsh conditions.

Turbine starters are most commonly used on:

Industrial compressors
Offshore oil rigs
Locomotives and marine vessels
Generators and emergency backup engines
Heavy mining equipment

Their ability to perform in dusty, wet, or explosive environments makes them the preferred choice for critical engine applications.

Advantages of Turbine Starters

Choosing a turbine starter over conventional electric or vane starters offers several benefits:

✅ Fewer Moving Parts

Turbine starters eliminate complex gear trains and friction-prone components. This results in:

Lower maintenance needs
Longer service intervals
Reduced risk of mechanical failure

✅ High Torque, Lightweight Design

These starters provide powerful cranking torque while remaining compact and lightweight—perfect for applications where space is limited or weight is a factor.

✅ Reliable in Extreme Conditions

Turbine starters operate efficiently in freezing temperatures, extreme heat, high humidity, and explosive environments. This makes them ideal for mining, oil & gas, and remote Australian conditions.

✅ Safe and Explosion-Proof

Many turbine starter models are certified for use in hazardous areas. They don’t require batteries or generate sparks, reducing ignition risks.

Turbine Starters at MultiTorque

MultiTorque is Australia’s trusted name for industrial starting systems. We supply and service a full range of turbine starters, including the popular TDI TurboTwin series.

🔩 New Starters and OEM Parts

We supply genuine TDI turbine starters as well as quality aftermarket solutions. Whether you need a T100, T200, or T300 model, we’ve got it in stock and ready to ship.

🔁 Service Exchange Program

Need a fast replacement? Send us your worn turbine starter and receive a fully refurbished unit, performance-tested and backed by warranty.

🧰 Repair & Refurbishment Services

We repair turbine starters in-house at our Perth and Brisbane locations. Services include:

Full strip-down and inspection
Bearing and seal replacement
Rebalancing and reassembly
Pressure testing and validation

No matter where you’re located in Australia, MultiTorque offers quick turnaround times and expert support.

Industries We Serve

Our turbine starter solutions support operations in:

Mining & Earthmoving: Haul trucks, drill rigs, power generators
Oil & Gas: Offshore platforms, fracking equipment, compressors
Power Generation: Backup and emergency start systems
Transport: Locomotives, marine engines, and industrial fleets

Whether you’re starting a 20L diesel engine or a 500HP generator, we’ve got the starter system that gets the job done—first time, every time.

Contact MultiTorque Today

Looking for a turbine starter supplier or service partner in Australia? Choose MultiTorque for expertise, reliability, and fast national support.

📞 Call 1300 726 525
📧 Email: sales@multitorque.com
🌐 Website: www.multitorque.com.au
🔗 LinkedIn: Follow MultiTorque

https://www.linkedin.com/company/3176927

When it comes to reliable and powerful engine starting solutions, TDI air starters have earned a global reputation for toughness and performance. Whether you’re operating in mining, oil & gas, or heavy industrial environments, TDI (TurboTwin) starters offer unmatched efficiency and dependability. In this article, we’ll explore how TDI air starters work, their advantages, and why MultiTorque is your trusted supplier in Australia.

What is a TDI Air Starter?

A TDI air starter is a compact, turbine-driven motor designed to crank diesel and gas engines. Unlike electric starters, which rely on batteries, TDI starters use compressed air or natural gas to generate torque. Their lightweight design, high torque output, and resistance to harsh environments make them ideal for engines in remote, demanding sites.

At MultiTorque, we stock and service a wide range of TDI air starter models, including TurboTwin T100, T200, and T300 series — perfect for engines used in offshore rigs, compressors, locomotives, and power generation.

Key Features of TDI Air Starters

TDI starters are engineered with precision and ruggedness. Here are some standout features:

Turbine Design: No gears, vanes, or rubbing parts — fewer failure points and longer service life.
Reliable in Extreme Conditions: Works in freezing temps, wet environments, and dusty mine sites.
Explosion-Proof & Safe: Ideal for hazardous and volatile environments.
High Torque-to-Weight Ratio: Delivers powerful starts even for large displacement engines.
Low Maintenance: Longer intervals between servicing compared to traditional starters.

Applications of TDI Air Starters

TDI air starters are used across many industrial sectors, including:

Oil & Gas: Starting engines on offshore platforms, drilling rigs, and compressors.
Mining: Heavy-duty haul trucks and generators.
Power Plants: Backup generator systems and emergency starts.
Marine & Rail: Vessel engines and locomotives where reliable start-up is mission critical.

If your application involves high-risk or remote locations, a TDI air starter is the go-to choice.

MultiTorque: Australia’s Premier Supplier of TDI Starters

As a leading supplier of air and gas starter motors across Australia, MultiTorque provides complete solutions — from brand-new units to expert servicing and refurbishment.

✅ We Stock Genuine TDI Starters

We supply only genuine TDI air starter models, including TurboTwin and Turbotwin T-series. We also carry replacement parts and accessories for fast turnaround.

Explore Air Starter Products

🔧 Service Exchange & Rebuild Options

Our service exchange program allows you to get a working unit fast — simply send in your worn-out starter and receive a refurbished one, fully tested and ready to go.

Air Starter Repairs and Exchange

🧰 Spare Parts and Support

We keep a full inventory of OEM-quality parts:

Turbine rotors
Nose housings
Gaskets and seals
Inlet valves
Mufflers and fittings

Plus, our in-house technicians are trained to diagnose and restore TDI air starters to factory standards.

Why Choose MultiTorque?

With over 15 years of experience in the industrial pump and starter motor industry, MultiTorque is trusted by Australia’s leading mining, energy, and infrastructure players. Our team ensures:

Fast national shipping
Expert advice and application matching
Custom mounting and installation options
Local repair service in both Perth and Brisbane

We stand by our commitment to safety, reliability, and long-term customer relationships.

📞 Call us at 1300 726 525
📧 Email: sales@multitorque.com
🔗 Website: www.multitorque.com.au
🔗 LinkedIn: MultiTorque LinkedIn

When it comes to reliable, efficient drilling, selecting the right earth auger manufacturer is critical. Whether you’re working in agriculture, construction, fencing, or landscaping, a high-quality earth auger ensures productivity, safety, and long-term cost-effectiveness. In this guide, we’ll break down what to look for in an earth auger manufacturer, key features to compare, and why MultiTorque is a trusted supplier across Australia.

What Is an Earth Auger?

An earth auger is a drilling device or machine equipped with a helical screw blade (the auger) that rotates into the ground to bore holes. These machines come in manual, petrol-powered, hydraulic, or electric models and are commonly used for:

Digging holes for fence posts or signs
Planting trees or shrubs
Soil sampling
Foundation and piling works

What Makes a Good Earth Auger Manufacturer?

With dozens of earth auger manufacturers on the market, not all are created equal. Here are key qualities to look for:

1. Durability and Materials

Manufacturers should use high-grade steel and hardened cutting edges for maximum wear resistance. Powder-coated finishes and rust-proof coatings also help extend lifespan, especially in outdoor environments.

2. Versatile Product Range

A great earth auger manufacturer will offer a variety of sizes and configurations, including:

Handheld single-operator augers
Two-man augers
Skid-steer or excavator-mounted auger systems
Custom-made attachments for unique ground conditions

3. Replacement Parts and After-Sales Support

You don’t want your operation to halt due to a broken blade or faulty gearbox. Reputable earth auger manufacturers provide replacement parts, technical support, and repair services.

4. Compliance with Safety and Industry Standards

Ensure your supplier complies with relevant Australian standards or international certifications, especially if operating in construction or mining sectors.

Why Choose MultiTorque?

At MultiTorque, we understand that equipment downtime costs money. That’s why we supply high-performance augers, parts, and accessories from reputable global and local earth auger manufacturers. Whether you’re a contractor, landscaper, or farmer, we’ve got solutions tailored to your operational demands.

Extensive Industry Experience

With over 15 years in the pumping and industrial supply game, MultiTorque has worked with clients across mining, agriculture, and civil infrastructure. We know the terrain, we know the tools, and we deliver only the best.

Custom Earth Auger Attachments

Need a custom auger solution for your skid-steer, excavator, or trailer rig? MultiTorque offers engineering support and fabrication capabilities for bespoke earth auger designs. Our custom trailers and drilling rigs are already in use across Australia.

Aftermarket Parts & Servicing

Beyond supplying augers, we stock a complete range of replacement parts including:

Cutting blades
Gearboxes
Drive shafts
Pilot bits
Auger teeth

We also offer repairs, rebuilds, and refurbishing on drilling and auger equipment.

Earth Auger Applications Across Australia

We support a wide range of industries with earth auger solutions, including:

Agriculture: Hole digging for planting, irrigation systems, and fencing
Construction: Piling and foundational augering
Utilities: Pole installation and trenching
Mining & Resources: Core sampling and blast hole drilling

Our clients span from Perth to Brisbane, and our fast-turnaround logistics ensure minimal downtime.

Get the Right Auger Today

Need help selecting the best product for your needs? Contact MultiTorque to speak with our knowledgeable team. We’ll recommend the best earth auger manufacturer and model based on your soil type, machine specs, and application.

📞 Call 1300 726 525
📧 Email: sales@multitorque.com
🌐 Website: www.multitorque.com.au
🔗 LinkedIn: MultiTorque on LinkedIn

If you’re searching for auger manufacturing companies that deliver durability, precision, and custom-engineered solutions, look no further than MultiTorque. Based in Australia with workshops in both Perth and Brisbane, we’re proud to be one of the country’s most trusted names in auger fabrication and supply.

With over 15 years of industry experience, we offer custom-built augers and screw conveyors tailored to suit a variety of industrial applications, from mining and agriculture to food processing, construction, and wastewater treatment.

What Do Auger Manufacturing Companies Do?

Auger manufacturing companies design, fabricate, and supply helical screw components — commonly referred to as augers — for conveying, drilling, mixing, or dewatering materials. These augers can be used in:

Grain and feed transport
Drilling and excavation
Food-grade material handling
Slurry, sludge, and wastewater applications
Bulk material conveyors in manufacturing plants

At MultiTorque, our fabrication services cover everything from small-scale augers to high-torque, wear-resistant models for rugged environments. We handle single units, custom runs, and high-volume orders with equal attention to quality.

What Sets MultiTorque Apart From Other Auger Manufacturing Companies?

Among the many auger manufacturing companies in Australia, MultiTorque distinguishes itself through:

✅ Custom Engineering for Every Job

No off-the-shelf guesswork here. We design augers based on your material type, volume, application, and flow rate needs.

✅ Australian-Made, Built Tough

Our augers are fabricated locally using high-grade stainless, mild steel, or abrasion-resistant alloys — with options for food-safe and high-wear applications.

✅ Repair, Refurbishment & Exchange

MultiTorque doesn’t just fabricate new augers — we also offer auger repair, modification, and service exchange to keep your systems running at peak performance.

✅ Industry Diversity

From a fertilizer auger on a farm in Toowoomba to a mining screw conveyor in WA, we supply sectors including:

Agriculture
Mining
Construction
Food processing
Wastewater treatment
Manufacturing

When it comes to auger manufacturing companies that understand the conditions and demands of Australian industry — MultiTorque leads the charge.

Our Auger Capabilities

We can fabricate:

Shafted and shaftless augers
Variable pitch augers
Continuous flight and sectional augers
Double helix, tapered, and custom geometry augers
Custom diameters and lengths to suit existing systems

We also offer protective coatings, surface treatments, and heat-resistant options to increase service life.

Explore our fabrication services at
👉 www.multitorque.com.au/custom-fabrication

Auger Repairs, Modifications & Reverse Engineering

Already working with a worn or legacy auger? MultiTorque can:

Rebuild damaged segments or flighting
Reverse-engineer worn augers to spec
Balance and re-weld shafts
Add wear-resistant edges or coatings
Modify pitch and diameter for improved performance

We help extend the service life of your augers while saving you time and cost on full replacements.

Meta Description:
Searching for top auger manufacturing companies in Australia? MultiTorque delivers custom augers, repairs, and fabrication services tailored for mining, agriculture, and more. Call 1300 726 525.

Contact MultiTorque Today – Australia’s Trusted Auger Manufacturer

Don’t settle for generic solutions from overseas suppliers. As one of the leading auger manufacturing companies in Australia, MultiTorque is ready to deliver quality you can trust, performance you can feel, and support you can count on.

📞 Call us today on 1300 726 525
📧 Email: sales@multitorque.com.au
🌐 Website: www.multitorque.com.au
🔗 LinkedIn: MultiTorque on LinkedIn

When it comes to precision, performance, and durability, MultiTorque stands out as a leading auger manufacturing specialist in Australia. With more than 15 years of hands-on experience in industrial and custom auger design, we offer tailored solutions for a wide range of industries — from agriculture and mining to food processing and wastewater management.

If you’ve been searching for a reliable auger manufacturing specialist, MultiTorque delivers high-quality augers that work hard, last longer, and are built right here in Australia.

What Does an Auger Manufacturing Specialist Do?

An auger manufacturing specialist designs and fabricates augers — helical screw components used to move, mix, or extract materials — based on the client’s specific operational needs. This includes:

Designing custom augers for conveyors, hoppers, mixers, or drilling systems
Selecting the correct materials and pitch for the auger’s environment
Fabricating continuous flighting or sectional flighting
Manufacturing shafted or shaftless augers for specialised applications
Offering post-fabrication services like coating, welding, and balancing

At MultiTorque, we don’t just build augers — we engineer them to outperform and outlast.

Why Choose MultiTorque as Your Auger Manufacturing Specialist?

We understand that one-size-fits-all solutions don’t work in harsh Australian conditions. Our team designs and manufactures augers to suit your exact flow rates, material types, and load conditions.

Here’s what sets us apart:

Custom Engineering – Every auger is built from the ground up, tailored for your application
Heavy-Duty Materials – Stainless steel, mild steel, and wear-resistant options available
Local Manufacturing – Proudly fabricated in Australia for faster turnaround and quality control
Full Lifecycle Support – We also repair, modify, and refurbish existing augers
Industry Experience – Trusted by companies in mining, agriculture, food, and water treatment

Whether you’re in Brisbane, Perth, or anywhere across Australia, MultiTorque is your go-to auger manufacturing specialist.

Our Auger Manufacturing Capabilities

We manufacture a wide range of auger types, including:

Shafted augers for screw conveyors and feeders
Shaftless augers for sticky or fibrous materials
Variable pitch augers for controlled material flow
Continuous flight augers for drilling and mixing
Sectional flighting for heavy-duty industrial systems

Need corrosion resistance or wear protection? We also offer custom coatings, surface treatments, and hardened edges to improve lifespan in aggressive environments.

Industries We Serve

As an experienced auger manufacturing specialist, we work across multiple industries:

Agriculture – Augers for grain, feed, and fertilizer transport
Mining – Heavy-duty screw conveyors and slurry handling systems
Food & Beverage – Stainless steel augers for hygienic environments
Construction & Drilling – Augers for boring, mixing, and excavating
Waste Management – Sludge and biosolid handling solutions
Water Treatment – Efficient dewatering augers built to spec

From lightweight screw conveyors to large-diameter soil augers, we can fabricate it all — and deliver anywhere in Australia.

Auger Repairs and Modifications

Already have an auger that’s seen better days? We can:

Replace or repair damaged flighting
Modify pitch or diameter
Balance shafts and reduce vibration
Extend lifespan with wear-resistant coatings

Don’t throw out a good auger — let MultiTorque bring it back to life.

Get in Touch with the Auger Experts

MultiTorque is the auger manufacturing specialist Australian industries trust for precision, performance, and reliability. Whether you’re launching a new project or upgrading old equipment, our team is here to help.

📞 Call us now at 1300 726 525
📧 Email: sales@multitorque.com.au
🌐 Visit: www.multitorque.com.au
🔗 LinkedIn: Follow MultiTorque on LinkedIn

If you’re in need of auger fabrication services in Australia, MultiTorque is your trusted partner for custom-engineered solutions built for durability and performance. Whether you need augers for industrial, agricultural, or mining applications, we design and fabricate precision augers tailored to your needs — right here in Australia.

What Is Auger Fabrication?

Auger fabrication is the process of designing and manufacturing helical screws (augers) used to move granular, semi-solid, or liquid materials in a controlled flow. Commonly used in screw conveyors, drilling systems, and mixing machinery, augers are a critical component in sectors like:

Agriculture (grain, feed, fertilizer transport)
Mining and exploration (soil and core drilling)
Waste management (sludge, slurry movement)
Food and beverage (bulk handling, processing)
Construction (earth boring and mixing)

At MultiTorque, our fabrication capabilities cover all types of augers — from flighted shafts and screw conveyor augers to custom-length spiral augers built to exact specifications.

Why Choose MultiTorque for Auger Fabrication?

We combine 15+ years of fabrication experience with industrial-grade engineering to ensure your augers are built to last and fit-for-purpose. Here’s why MultiTorque is the leading choice for auger fabrication across Australia:

Custom Design & Engineering – Every auger is fabricated to suit your material, application, and environmental conditions.
Heavy-Duty Materials – We work with stainless steel, carbon steel, and abrasion-resistant alloys for long-lasting performance.
Precision Manufacturing – Using CNC plasma cutting and advanced welding techniques to maintain tolerance and balance.
Local Support – Fabricated in Australia, with service hubs in Brisbane and Perth for faster turnaround and reliable after-sales support.
Experienced Team – Our technicians understand the operational pressures of industrial equipment and tailor each design for maximum efficiency.

To see our other fabrication services, visit www.multitorque.com.au/custom-fabrication.

Our Auger Fabrication Capabilities

MultiTorque can fabricate:

Shafted and shaftless augers
Variable pitch and tapered augers
Continuous flighting
Segmented flighting
Single or double-helix screw augers
Custom coatings or surface treatments for corrosion and wear resistance

Whether you need a one-off prototype or a full production run, we deliver fast, high-quality results.

Applications of Custom Fabricated Augers

Custom augers are used across a range of industrial and commercial operations. MultiTorque augers are frequently fabricated for:

Screw conveyors in food processing and mining
Dewatering systems in wastewater treatment
Fertilizer or grain transport in agriculture
Drilling operations in construction and energy
Bulk material handling in manufacturing

Our augers are designed to work in both horizontal and inclined setups, with options for abrasion resistance and high-torque applications.

Auger Repairs and Modifications

Already have an auger that’s worn or underperforming? MultiTorque also offers auger repair and modification services. We can:

Replace damaged flighting
Rebuild worn shafts or segments
Modify pitch or diameter
Apply wear-resistant coatings
Rebalance and re-weld to OEM spec

This service extends the lifespan of your augers, saving you money on replacements while keeping your operations moving.

Meta Description:
Need custom auger fabrication in Australia? MultiTorque designs and fabricates high-performance augers for mining, agriculture, food, and more. Call 1300 726 525.

Contact MultiTorque Today

Whether you’re starting a new project or need to replace a worn auger, MultiTorque delivers precision-built augers you can rely on. Call us today at 1300 726 525 or email sales@multitorque.com.au to discuss your fabrication needs.

Explore more at www.multitorque.com.au, or connect with us on LinkedIn for project updates and behind-the-scenes fabrication footage.

Newer Posts

Older Posts