Pumps Suppliers, When it comes to sourcing industrial pumps, quality and reliability matter. Whether you’re in mining, agriculture, construction, or wastewater management, choosing the right pump suppliers can make or break your operation.

At MultiTorque, we’re proud to be one of Australia’s most trusted industrial pump suppliers, delivering high-performance equipment, expert servicing, and custom-built pump solutions across the country.

Why Choosing the Right Pumps Supplier Matters

Not all pumps—or suppliers—are created equal. Working with experienced pump suppliers ensures:

Access to reputable brands
Expert advice tailored to your industry
Quality servicing and spare parts availability
Long-term support and warranties

When your operation depends on fluid transfer, dewatering, or slurry management, downtime isn’t an option. That’s why MultiTorque is committed to keeping your systems running at full capacity.

MultiTorque: More Than Just a Pump Supplier

We don’t just sell pumps—we engineer solutions.

As one of Australia’s leading pumps suppliers, MultiTorque offers:

Supply of new pumps from trusted global brands
Expert repairs and rebuilds
On-site servicing and maintenance
Custom pump trailer design and fabrication
Emergency support and fast turnarounds

Whether you’re sourcing a single unit or outfitting a full industrial setup, we tailor every job to suit your exact needs.

Brands We Supply

We work with globally recognised manufacturers to ensure every pump is built for performance and durability. Our supplier network includes:

Wilden (air-operated diaphragm pumps)
Orbit (progressive cavity pumps)
Napco (centrifugal pumps)
NOV (industrial and downhole pumping solutions)
Franklin Electric, Grundfos, Davey and more

If you’re after a specific pump brand or replacement part, chances are we can supply it—or custom-fit an equivalent.

Pump Types We Supply and Service

As full-service pump suppliers, we provide and support a wide range of pump technologies, including:

🌀 Centrifugal Pumps

Ideal for high-volume water transfer, cooling systems, and general site operations.

💪 Positive Displacement Pumps

Used for thick, viscous, or abrasive fluids—especially in mining, wastewater, and food processing.

🚧 Diaphragm Pumps

Great for fuel transfer, waste oil, and air-driven fluid movement in remote or hazardous environments.

💦 Submersible & Borehole Pumps

Engineered for deep groundwater extraction or flood management, including trailer-mounted pump systems through our BoreBoss sub-brand.

Custom Pump Trailer Solutions

Need a mobile pumping setup? We design and fabricate custom trailer-mounted pump units built for remote work, borehole access, or site dewatering.

Our trailers are purpose-built for:

Mining and exploration
Agriculture and irrigation
Emergency flood or stormwater response
Construction dewatering

All trailers are built to spec and fully serviceable by our team.

Why MultiTorque Is the Supplier of Choice

With over 15 years in the game, MultiTorque is trusted by industries that demand rugged, long-lasting equipment. We’re based in Brisbane and Perth, but we supply and support clients Australia-wide.

What sets us apart:

Nationwide logistics and delivery
Expert team with hands-on industry experience
OEM parts and servicing
Full design-to-delivery capability
Customer-first attitude—no shortcuts, no guesswork

Let’s Get You the Right Pump

Whether you’re looking to replace a worn-out pump, expand capacity, or build a new system from scratch, MultiTorque has the gear, the know-how, and the service to make it happen.

We’re Australia’s go-to pump suppliers for a reason—and we’re ready to help.

📞 Contact MultiTorque

✅ Australia’s trusted pump suppliers for industry
📧 sales@multitorque.com.au
📞 1300 726 525
🌐 www.multitorque.com.au

🔗 Internal Links:

Miti Pumps

Air & Gas Motor Starters

Pumps Suppliers

Looking for trusted pump suppliers in Australia? MultiTorque supplies, services, and custom-builds pumps for mining, agriculture, construction, and more. Call 1300 726 525.

When it comes to moving water efficiently in demanding environments, nothing is more crucial than a reliable industrial water pump. Whether you’re working in mining, construction, manufacturing, or agriculture, the right pump can make or break your operation.

At MultiTorque, we don’t just sell pumps—we design, supply, service, and repair custom industrial water pump systems that keep Australian industries flowing.

What Is an Industrial Water Pump?

An industrial water pump is a heavy-duty piece of equipment designed to move large volumes of water under pressure, across distances, or vertically from deep sources. Industrial water pumps are engineered to withstand harsh environments, handle corrosive or abrasive fluids, and operate continuously without failure.

At MultiTorque, we specialize in supplying both dynamic (centrifugal) and positive displacement pumps—tailored for tough Aussie conditions.

Industrial Water Pump Applications

MultiTorque supports businesses across sectors with pumps that are purpose-built for:

Dewatering on mine sites and construction zones
Irrigation and water transfer in agriculture
Process water circulation in manufacturing
Effluent and sludge movement in wastewater plants
Custom trailer-mounted pumping systems for remote areas

If you need an industrial water pump in Australia, MultiTorque is your go-to partner.

Common Types of Industrial Water Pumps

Here’s a breakdown of the key pump types we supply and service:

🌀 Centrifugal Pumps

Centrifugal pumps are ideal for transferring clean or lightly contaminated water. They’re simple, cost-effective, and built for high flow applications.

Used for: cooling systems, tank transfer, general site water movement
MultiTorque brands: Napco, NOV, Orbit, and more

💪 Positive Displacement Pumps

These pumps move a fixed volume of fluid per cycle, making them perfect for thick, viscous, or abrasive fluids.

Used for: sludge pumping, chemical dosing, food-grade applications
Types: Progressive cavity, rotary lobe, gear pumps
Serviced by MultiTorque: Wilden, Orbit, and other top-tier brands

🚧 Submersible Pumps

Designed to operate fully submerged, submersible pumps are commonly used in pits, boreholes, or flooded areas.

Used for: mine dewatering, construction sites, and remote sump drainage
MultiTorque custom trailers: We build borehole pump trailers under our BoreBoss sub-brand for rapid deployment.

Why Choose MultiTorque for Industrial Water Pumps?

For over 15 years, MultiTorque has delivered custom-engineered solutions to Australian industry. Here’s why businesses across Perth, Brisbane, and beyond choose us:

✅ Complete In-House Services

We do more than sell pumps—we install, service, repair, and rebuild. Our technicians are trained across a wide range of industrial water pump types, with a strong focus on safety, reliability, and compliance.

✅ Custom Trailer Pump Systems

Need mobility? Our team can design and fabricate fully custom pump trailer units built to your specs. Perfect for rural operations or temporary worksites.

✅ Emergency Repairs and Maintenance

Breakdown on-site? Our rapid-response team can attend, diagnose, and repair your system to get you back online fast.

✅ Genuine OEM and Aftermarket Parts

We stock a wide range of parts for brands like Napco, NOV, Wilden, Orbit, and more. We can also source hard-to-find components on request.

What to Consider When Buying an Industrial Water Pump

Choosing the right pump can save you thousands in energy, repairs, and downtime. When you work with MultiTorque, we assess:

Required flow rate (LPM)
Total dynamic head (TDH)
Fluid characteristics (corrosive, abrasive, viscous)
Power source (diesel, electric, air start)
Duty cycle and run time
Installation environment

Maintenance Tips for Long-Term Pump Performance

MultiTorque offers scheduled maintenance services and breakdown support for all major industrial water pump systems.

🧰 Maintenance Checklist:

Inspect seals and bearings monthly
Check for vibration or cavitation noise
Flush lines and impellers if pumping slurry or sediment
Monitor power consumption for drop in efficiency
Schedule a yearly service to avoid unplanned failures

Want a hassle-free experience? Ask us about maintenance contracts.

Industrial Water Pumps and Safety

We understand the role that pumps play in safety-critical operations. From firefighting water supplies to environmental containment, MultiTorque systems are built to meet Australian compliance standards.

We never compromise on:

Safe installation
Proper pressure ratings
System redundancies
Operator training

Industries We Serve

MultiTorque proudly supports clients in:

Mining and exploration
Agriculture and irrigation
Oil and gas
Wastewater and utilities
Government infrastructure projects
Manufacturing and processing

Need a compliance-ready pump solution for your site? We’ve got you covered.

Let MultiTorque Be Your Pump Partner

We’re not just a supplier—we’re a trusted partner for all things industrial water pump in Australia. Whether you’re upgrading your system, solving an urgent breakdown, or building a new pump trailer, we deliver custom-engineered reliability.

📞 Get in Touch

Talk to the MultiTorque team today for tailored solutions and expert advice.

📍 Perth & Brisbane-based support
📞 1300 726 525
📧 sales@multitorque.com.au
🌐 www.multitorque.com.au

Safe Work Australia – Pressure Equipment

A great wine begins with great process control—and behind every smooth fermentation or transfer is a reliable winemaking pump. These pumps are critical to modern wineries, helping move everything from must to finished wine while preserving flavour, preventing oxidation, and ensuring hygienic handling.

At MultiTorque, we supply, service, and repair winemaking pumps across Australia. Whether you’re a boutique winery or a large-scale commercial operation, we offer tailored pumping solutions to help you streamline your production and protect your product.

🔗 Visit MultiTorque
🔗 Follow us on LinkedIn

What Is a Winemaking Pump?

A winemaking pump is a sanitary-grade pump designed to move fluids during the wine production process. Unlike general-purpose industrial pumps, winemaking pumps are engineered to gently transfer liquids and solids—such as must, lees, or finished wine—without damaging the product or introducing unwanted oxygen.

They’re made of food-safe materials, typically 316 stainless steel, and are designed for easy cleaning, low-shear performance, and precise control.

Why Are Pumps So Important in Winemaking?

In traditional winemaking, gravity was used to transfer fluids between stages. While still used in some cellars, this method is time-consuming, inconsistent, and not scalable. Pumps offer:

Speed and efficiency for high-volume operations
Control over flow rates for delicate processes
Reduced manual labour
Cleaner production environments
Consistent wine quality across batches

Common Applications of Winemaking Pumps

Production Stage	Pump Function
Crushing	Transfer of must (crushed grapes) from crusher to fermenter
Fermentation	Pump-overs for flavour extraction (remontage)
Racking	Moving wine off sediment (lees) into clean tanks
Filtration	Controlled transfer to bottling lines
Barrel Filling	Transferring wine into or out of oak barrels
CIP (Clean-in-Place)	Circulating cleaning agents to maintain hygiene

Types of Winemaking Pumps

1. Flexible Impeller Pumps

Gentle, reversible flow
Ideal for wine transfer and barrel operations
Self-priming and easy to clean

2. Peristaltic Pumps

Extremely gentle—no product contact with mechanical parts
Excellent for handling grape must or lees
Minimal oxygen exposure

3. Air-Operated Diaphragm Pumps (AODD)

Excellent for solids, slurry, and chemical transfer
Self-priming and explosion-safe
Ideal for mobile and versatile applications

4. Centrifugal Pumps (Sanitary Grade)

Best for clean, finished liquids like filtered wine
High flow, energy-efficient
Easy disassembly and cleaning

Key Features of a Quality Winemaking Pump

✅ Sanitary Design:
All contact surfaces should be food-grade and crevice-free to prevent bacterial buildup.

✅ Low Shear:
Preserves the structure of the wine and prevents aeration, especially during fermentation.

✅ Easy to Clean:
CIP-compatible or easy disassembly reduces downtime between batches.

✅ Flow Control:
Supports variable speeds for delicate processes like barrel racking or filtration.

✅ Portability:
Mobile units with trolley mounts are ideal for flexible cellar layouts.

MultiTorque’s Pump Solutions for Wineries

At MultiTorque, we go beyond supplying equipment—we engineer pump systems that suit your production style, batch size, and budget.

🔧 Supply & Installation

We stock and configure winemaking pumps from trusted brands like:

Wilden
Verder
Graco
Inoxpa
Ampco
Fristam

Each system is optimized for your specific application—from mobile barrel units to large-volume fermentation pump-overs.

🛠️ Repair & Servicing

Emergency rebuilds in our Perth and Brisbane workshops
Fast access to replacement impellers, hoses, clamps, and seals
Scheduled maintenance programs
Onsite troubleshooting and installation support

Supporting Australia’s Wine Industry

Australia is home to 2,400+ wineries, producing over 1.3 billion litres of wine annually. As competition grows, wineries need reliable equipment to meet demand while maintaining the artistry of their product.

We work with:

Boutique vineyards looking to scale
Commercial wineries with large-batch processing
Natural and organic winemakers needing gentle transfer solutions
OEMs building complete winery systems

Whether you need a single pump or a full pumping skid system, MultiTorque has the expertise and experience to deliver.

Why Choose MultiTorque?

🇦🇺 Local Support

We’re proudly Australian with workshops in Perth and Brisbane, offering national coverage and fast local service.

🧠 Industry Knowledge

With 15+ years in the industrial and food & beverage sectors, we know the compliance, hygiene, and engineering standards you need to meet.

⚙️ Custom Solutions

We design and build custom skids, mobile units, and control systems to suit your site and workflow.

Contact MultiTorque Today

If you’re looking to upgrade your winery’s pumping system, reduce bottlenecks, or replace a tired old unit, we’re here to help.

📞 Call us now on 1300 726 525
📧 Email: sales@multitorque.com
🌐 www.multitorque.com.au
🔗 LinkedIn – MultiTorque Industries

Behind every great beer is a great brewery—and behind every great brewery is a reliable brewery pump. These unsung heroes of the brewing process are vital for maintaining hygiene, controlling flow rates, and ensuring consistency across every batch.

At MultiTorque, we supply, service, and repair brewery pumps built to handle the demands of modern brewing—whether you’re running a craft operation or a large-scale production facility. With expertise across food, beverage, and industrial sectors, we deliver dependable pumping solutions tailored to the brewing industry.

🔗 Visit MultiTorque
🔗 Follow us on LinkedIn

What Is a Brewery Pump?

A brewery pump is a hygienic-grade pump used to transfer liquids at various stages of beer production. From moving wort and mash to transferring yeast and sanitizing fluids, brewery pumps are essential for both automation and cleanliness.

These pumps must balance gentle handling of ingredients with robust, sanitary construction to prevent contamination and maintain product quality.

Common Uses of Brewery Pumps

Stage	Purpose
Mash Transfer	Moving thick mash from the mash tun to the lauter tun
Wort Transfer	Pumping hot wort from the kettle to the fermenter
CIP (Clean-in-Place)	Circulating caustics, acids, and sanitizers through the system
Yeast Harvesting	Transferring yeast between fermenters or storage
Filtration	Moving beer through filters before carbonation
Keg/Bottle Transfer	Controlled flow into packaging systems

Types of Brewery Pumps

🍺 1. Centrifugal Pumps

Most commonly used in breweries
Ideal for transferring wort and beer
Handles hot liquids up to 100°C
Easy to clean and highly efficient

🧽 2. Positive Displacement Pumps

Includes rotary lobe, diaphragm, and peristaltic pumps
Ideal for thick or shear-sensitive fluids (e.g. yeast, mash)
Precise, low-shear flow for delicate products

💨 3. Air-Operated Double Diaphragm (AODD) Pumps

Self-priming, portable, and safe for explosive environments
Great for transferring viscous fluids or cleaning chemicals
Common for mobile brewing setups and CIP systems

Key Features of a High-Quality Brewery Pump

✅ Sanitary Design

Made from 316 stainless steel or food-grade plastics
Smooth, crevice-free surfaces to prevent bacterial growth
Compatible with CIP systems or easy disassembly for manual cleaning

✅ Temperature Resistance

Must handle both hot (wort) and cold (fermentation) fluids
High-grade seals and gaskets for thermal cycling

✅ Flow Control

Some systems include VSDs (Variable Speed Drives) for precision
Pressure regulation for packaging and filtration stages

✅ Portability

Many pumps are mounted on stainless steel trolleys for mobility
Useful in breweries with flexible layouts or seasonal workflows

Why Brewery Pumps Matter

If your pump fails mid-transfer, your entire batch is at risk. That’s why breweries invest in pumps that are:

Hygienic – Ensures beer quality and prevents contamination
Durable – Withstands frequent use, high temperatures, and caustic cleaners
Efficient – Saves energy and time in high-volume environments
Versatile – Handles multiple brewing processes with ease

MultiTorque’s Brewery Pump Services

We don’t just sell pumps—we support them from the first pour to the final keg.

🔧 Supply & Installation

We supply centrifugal, AODD, lobe, and peristaltic pumps from trusted global brands. All units are chosen based on your brewery’s volume, layout, and hygiene requirements.

🧠 Custom Engineering

Need a mobile CIP pump with integrated controls? A custom keg transfer system? We can design and fabricate it—built to meet food-grade standards and brewery-specific needs.

🔄 Repairs & Rebuilds

Brewery downtime is costly. Our workshops in Perth and Brisbane offer fast repairs, pump rebuilds, and emergency servicing.

We also keep common spares like seals, impellers, hoses, and clamps in stock to minimize your downtime.

Brands We Work With

We supply and service pumps from some of the world’s best-known manufacturers:

Wilden
Graco
Grundfos
Verder
Fristam
Inoxpa
Ampco
Tuthill

Whether it’s a replacement or an upgrade, we’ll find a solution that works.

Supporting Australia’s Craft and Commercial Brewers

Australia’s beer scene is booming—with over 600 craft breweries and countless major producers. Cleanliness, consistency, and scalability are critical to competing in this market—and that starts with your equipment.

At MultiTorque, we’re proud to support:

Independent brewers scaling operations
Large-scale beer production plants
Cider, kombucha, and spirits manufacturers
OEMs building full production lines

If you need a reliable pump system that can handle brew after brew, we’ve got your back.

Why Choose MultiTorque?

🇦🇺 Australian Expertise

We’ve worked with food and beverage producers across the country—from boutique distilleries to high-volume food factories.

🔩 Full Lifecycle Support

We don’t just drop off a pump and disappear. We handle:

Sizing and selection
Installation
Maintenance schedules
Emergency support
Rebuilds and spare part sourcing

📈 Long-Term Value

We supply robust, hygienic pumps that last, reduce downtime, and boost efficiency—so you can focus on brewing quality beer.

Ready to Pump Up Your Brewery?

Whether you’re upgrading old gear, expanding capacity, or starting a new line, MultiTorque can help. We’ll match you with the right brewery pump solution—built for flow, flavour, and future growth.

📞 Call us on 1300 726 525
📧 Email: sales@multitorque.com
🌐 Visit www.multitorque.com.au
🔗 Connect on LinkedIn

In the world of winemaking, precision, hygiene, and gentle handling are non-negotiable. Whether you’re transferring must during fermentation or racking delicate vintages into barrels, a wine pump is an essential part of maintaining quality and preserving the character of your wine.

At MultiTorque, we supply and service high-quality pumps for a wide range of food and beverage applications—including wine production. From boutique vineyards to commercial wineries across Australia, we deliver pumps that are engineered for performance, durability, and most importantly, the gentle transfer that wine demands.

🔗 Visit MultiTorque
🔗 Follow us on LinkedIn

What is a Wine Pump?

A wine pump is a sanitary pump used in the winemaking process to transfer wine or grape must from one container to another. It is specially designed to handle liquid with a high risk of oxidation or contamination, and to move wine without damaging its taste, aroma, or structure.

Unlike general-purpose industrial pumps, wine pumps are made from food-grade materials, often with gentle pumping action to avoid disturbing delicate compounds or tannins in the wine.

Common Applications for Wine Pumps

Wine pumps are used at multiple stages of the winemaking process:

Stage	Use of Wine Pump
Crush & Fermentation	Transferring grape must to fermentation tanks
Pump Over (Remontage)	Circulating wine over grape skins for extraction
Racking	Moving wine off lees into clean containers
Filtration & Bottling	Transferring clarified wine to filtration systems or bottling lines
Barrel Transfers	Gently moving wine in and out of oak barrels

Types of Wine Pumps

Different phases of winemaking require different pump types, and selecting the right one can make a big difference in wine quality.

🍷 1. Flexible Impeller Pumps

Ideal for low to medium-viscosity liquids
Gentle on product, self-priming
Often reversible for easy racking and cleaning
Commonly used in small wineries or for barrel work

🍇 2. Peristaltic Pumps

Best for delicate must or wines with solids
Fluid never contacts moving parts (high hygiene)
Extremely gentle with zero shear
Common in premium winemaking environments

💧 3. Diaphragm Pumps (AODD)

Air-operated, ideal for portable wine pumps
Can handle solids and foamy liquids
Food-grade construction with minimal oxidation

🔄 4. Centrifugal Pumps (Sanitary)

High-volume applications
Used in bottling and filtration
Not as gentle—best suited for later stages

What Makes a Good Wine Pump?

When sourcing a wine pump, look for the following:

✅ Food-Grade Materials

Stainless steel 316, EPDM seals, or other sanitary materials ensure no contamination of the wine.

✅ Gentle Handling

Low-shear or non-contact pumping prevents oxidation and protects wine integrity.

✅ Easy to Clean (CIP)

Winery equipment needs frequent cleaning. A wine pump should support Clean-in-Place (CIP) or be easy to disassemble.

✅ Reversible Flow

Great for filling and draining barrels or tanks, and gives greater flexibility in layout.

✅ Mobility

Portable trolley-mounted pumps are ideal for wineries that need to move equipment between tanks, crush pads, and barrels.

Industries We Serve

At MultiTorque, we work with a wide range of businesses in the food and beverage sector, including:

Boutique vineyards & cellar doors
Large commercial wineries
Contract winemakers
Breweries and cider houses
Juice and beverage manufacturers

Custom Pumping Solutions for Wineries

No two wineries are the same. That’s why we offer custom wine pump packages including:

Portable pump skids on stainless trolleys
Barrel transfer setups with hoses and fittings
Integrated control panels for speed and flow control
Food-grade hose and clamp kits
Air compressors for AODD systems
Replacement seals, impellers, and spares

Whether you’re scaling up production or upgrading ageing infrastructure, we’ll help you choose the right wine pump for your needs—and support it long after install.

Servicing & Repairs

Wine pumps operate during peak harvest times—so downtime is not an option. That’s why MultiTorque offers:

Scheduled servicing during off-season
Emergency pump rebuilds in our Perth & Brisbane workshops
Seal and impeller replacements
Hygienic cleaning, testing, and reassembly

We also carry spare parts for major pump brands, and offer fast turnaround for urgent winery repairs.

Why Choose MultiTorque?

With over 15 years of experience supplying pumps to Australian industries, we’ve become a trusted partner for reliable pumping systems—whether you’re bottling wine or dewatering a mine.

🛠️ Expert Support

We’re not just salespeople—we’re pump technicians. We help you spec, size, and maintain your equipment.

🍷 Wine Industry Knowledge

We understand the unique pressures and seasonality of winemaking, and offer equipment tailored for vintage time.

🇦🇺 National Support

From Margaret River to the Hunter Valley, we supply and support winemakers across Australia.

Ready to Upgrade Your Winery’s Pumping System?

If you need a pump that’s gentle on your wine but tough on performance, talk to MultiTorque today. We’ll match you with a solution built to last—and built for flavour.

📞 Call us at 1300 726 525
📧 Email: sales@multitorque.com
🌐 www.multitorque.com.au
🔗 Follow us on LinkedIn

Multi Torque Industries

In demanding industrial and municipal environments, standard pumps just don’t cut it. Heavy duty submersible sewage pumps are designed to handle the dirtiest jobs—literally. Whether you’re dealing with raw sewage, sludge, or industrial wastewater, you need equipment built for high solids, high flow, and high reliability.

At MultiTorque, we supply and service top-tier submersible sewage pumps engineered to withstand the harshest conditions. From mining camps in WA to treatment plants in QLD, we help keep Australia flowing.

🔗 Visit the MultiTorque Homepage
🔗 Connect with MultiTorque on LinkedIn

What Are Heavy Duty Submersible Sewage Pumps?

A heavy duty submersible sewage pump is a pump that is fully submerged in the fluid it is designed to handle. Unlike standard above-ground sewage pumps, these are specifically engineered to handle:

Raw sewage with high solid content
Industrial wastewater
Grease and sludge
Abrasive or corrosive liquids
Continuous-duty applications in harsh environments

They’re often used in wastewater treatment facilities, mining operations, food processing, and commercial facilities where high-capacity, non-clogging performance is essential.

Key Features of Heavy Duty Submersible Sewage Pumps

✅ Solids Handling Capabilities

Can handle solids up to 100 mm (or larger)
Impeller designs such as vortex or channel-style minimize clogging
Ideal for raw sewage and effluent pumping

✅ Corrosion and Abrasion Resistance

Cast iron, stainless steel, or duplex alloy construction
Ceramic-coated seals and hardened impellers
Suitable for chemically aggressive environments

✅ Long Service Life

Double mechanical seals with oil chambers
Thermal protection and moisture detection built in
Designed for continuous, unattended operation

✅ Energy Efficiency

Available with high-efficiency motors and variable speed drive (VSD) options
Low maintenance requirements = lower total cost of ownership

Where Are Submersible Sewage Pumps Used?

🏗️ Municipal & Government

Wastewater treatment plants
Sewer pump stations
Stormwater overflow control
Septic systems

🛠️ Industrial

Meat and food processing facilities
Chemical and pharmaceutical plants
Oil and gas separation pits
Heavy manufacturing washdown areas

🛢️ Mining

Underground sumps
Remote camp effluent systems
Tailings containment pits
Sludge dewatering

At MultiTorque, we support projects in Perth, Brisbane, and across regional Australia with the right pump for every application.

Choosing the Right Heavy Duty Submersible Pump

When selecting a pump, it’s critical to match the right specs to your site’s requirements. Factors to consider:

Factor	Why It Matters
Flow rate (L/min or m³/h)	Ensures the pump can keep up with demand
Head pressure (m)	Affects motor power and impeller design
Solid particle size	Determines required impeller clearance
Liquid composition	Chemicals, pH, temperature affect material choice
Duty cycle	Continuous, intermittent, or automatic

We work closely with customers to assess site conditions and recommend the best submersible sewage pump system—no guesswork, just results.

Top Brands We Work With

At MultiTorque, we supply, service, and repair equipment from trusted names in the pump industry, including:

Flygt
Tsurumi
Zenit
ABS/Sulzer
Lowara
Davey Water
Ebara

Whether you’re replacing a failed unit or building a new pump station, we can supply the exact model—or a compatible upgrade—ready for Australian conditions.

Pump System Integration & Custom Builds

Sometimes an off-the-shelf pump just won’t cut it. That’s where we shine.

Our team of engineers and fabricators builds custom solutions such as:

Skid-mounted submersible pump systems
Float switch and control panel integration
Stainless steel lifting chains, guide rails, and bases
Telemetry and remote monitoring
Plug-and-play trailer systems for mobile wastewater handling

If you need a turnkey solution, we can design and deliver it.

Repairs, Rebuilds & Spare Parts

Heavy duty doesn’t mean maintenance-free. These pumps operate in brutal conditions, and timely servicing prevents catastrophic failures.

MultiTorque Provides:

Full workshop rebuilds in Perth and Brisbane
Mechanical seal and bearing replacements
Electrical diagnostics and cable repair
Impeller and wear plate machining
Site inspections and condition reporting

We stock and source genuine spare parts for most major brands, and we can fabricate custom components if OEM is unavailable.

Why Choose MultiTorque?

You don’t want to waste time and money on underperforming pumps. You need a partner that delivers reliability, performance, and support.

✅ 15+ Years of Industry Experience

We’ve worked on mine sites, municipal treatment plants, and remote stations—across WA, QLD, and beyond.

✅ Custom Engineering Expertise

Need a mobile pumping trailer with remote start? No problem. We design around your needs.

✅ Full Life-Cycle Support

From design and selection to install, service, and rebuild—we’re with you the whole way.

Ready for a Heavy Duty Pump That Handles the Job?

If you need a heavy duty submersible sewage pump that can take a beating and keep pumping—MultiTorque has your back. Talk to our team today and we’ll help spec, supply, and support the right solution.

📞 Call us at 1300 726 525
📧 Email: sales@multitorque.com
🌐 www.multitorque.com.au
🔗 Follow us on LinkedIn

When it comes to fluid transfer in industrial settings, few machines are as essential—or as widely used—as the industrial centrifugal pump. Known for their simple design, robust performance, and versatility, these pumps are the go-to solution across mining, agriculture, water treatment, and chemical processing.

At MultiTorque, we supply, service, and support high-quality centrifugal pumps tailored to meet the demands of Australia’s toughest industrial operations.

🔗 Visit MultiTorque Homepage
🔗 Connect with MultiTorque on LinkedIn

What Is an Industrial Centrifugal Pump?

An industrial centrifugal pump is a mechanical device used to move fluid by converting rotational kinetic energy into hydrodynamic energy. This energy is generated by a rotating impeller that draws liquid into the pump casing and pushes it outward through the discharge.

These pumps are ideal for:

High-flow, low-viscosity applications
Continuous-duty cycles
Large-scale fluid handling with minimal maintenance
Systems requiring high reliability and energy efficiency

How Do Centrifugal Pumps Work?

The operating principle is straightforward:

Liquid enters the pump through the suction inlet.
A rotating impeller increases the fluid’s velocity.
The high-speed fluid is directed into a volute casing.
Kinetic energy is converted into pressure, pushing fluid through the discharge outlet.

This mechanism allows for continuous flow and is ideal for systems requiring consistent, reliable pumping.

Types of Industrial Centrifugal Pumps

At MultiTorque, we supply and service a wide range of centrifugal pump designs, including:

🌊 End Suction Pumps

Most common design for general-purpose use
Used in HVAC, water transfer, and irrigation
Simple maintenance and excellent flow capabilities

🔄 Multistage Centrifugal Pumps

Multiple impellers for high-pressure applications
Ideal for boiler feed, high-rise water supply, and long-distance pipelines

🌀 Split Case Pumps

Double-suction design for large-volume transfer
Excellent efficiency and durability
Common in municipal and industrial water systems

⚙️ Self-Priming Centrifugal Pumps

Eliminates the need for foot valves
Great for portable and intermittent-duty applications
Perfect for dewatering and site drainage

💧 Vertical Inline Pumps

Space-saving vertical design
Ideal for industrial cooling and process water systems

Key Industries That Rely on Centrifugal Pumps

Industry	Application Example
Mining	Slurry transport, dewatering, tailings water recovery
Water Treatment	Filtration systems, chlorination, raw water intake
Agriculture	Irrigation, fertigation, livestock watering systems
Manufacturing	Process cooling, fluid transfer, boiler feed
Oil & Gas	Condensate return, injection systems, refining
Construction	Groundwater control, pressure boosting, sump removal

Our team at MultiTorque helps match the right centrifugal pump to each unique fluid, flow rate, head pressure, and environmental condition.

Benefits of Industrial Centrifugal Pumps

Centrifugal pumps offer numerous benefits over other pump types, including:

✅ High Flow Rates

Centrifugal pumps deliver large volumes of fluid efficiently, making them ideal for high-throughput systems.

✅ Simplicity & Reliability

With few moving parts and a non-complex design, these pumps are easier to maintain and less prone to mechanical failure.

✅ Energy Efficiency

When properly sized and paired with a VSD (variable speed drive), centrifugal pumps operate at excellent efficiency levels, reducing long-term energy costs.

✅ Scalability

Whether you’re running a small facility or a large-scale plant, centrifugal pumps are available in a wide range of sizes and materials to meet your demands.

Common Problems (and How MultiTorque Solves Them)

Even the most reliable centrifugal pumps can face issues if not correctly installed or maintained. Here are a few examples—and how we address them:

Problem	Cause	MultiTorque Solution
Cavitation	Inadequate suction pressure	System design reviews, impeller re-sizing
Seal leaks	Worn seals or misalignment	Seal replacements, alignment checks
Excessive noise/vibration	Imbalance or pipe strain	Dynamic balancing, pipework support retrofit
Poor performance	Incorrect pump sizing	Custom pump selection and on-site assessment

Our technicians conduct on-site diagnostics, system audits, and full overhauls to keep your pumps running at peak performance.

Custom Centrifugal Pump Systems

At MultiTorque, we go beyond simple pump supply. We design and build custom pump systems to suit the specific flow, pressure, and layout requirements of your site.

Our custom solutions can include:

Skid-mounted pump sets
Stainless steel pipework and manifolds
VSD-controlled electric motors
Remote control panels and telemetry
Mobile pump trailers for site portability

If off-the-shelf doesn’t cut it, we’ll fabricate the system you need from the ground up.

Service & Maintenance

Industrial operations can’t afford downtime. That’s why we offer:

🛠️ Full workshop rebuilds
🔁 Pump exchange programs
📦 Genuine and aftermarket spare parts
🔍 On-site inspection and servicing
📋 Preventative maintenance contracts

We support leading brands like Flowserve, Orbit, Wilden, Napco, and more—ensuring you get reliable service regardless of your pump make.

Why Choose MultiTorque?

With over 15 years in the industry and a deep understanding of industrial fluid handling, we deliver solutions built for Australian conditions.

🧠 Expertise

Our team includes experienced technicians, electricians, and designers who understand both mechanical systems and real-world applications.

⚒️ Full-Service Support

From pump sizing and selection to installation, commissioning, and repairs—we’re with you all the way.

🚛 National Coverage

With locations in Perth and Brisbane, we service clients across WA, QLD, NSW, and VIC.

Ready to Upgrade Your Centrifugal Pump System?

Looking for a centrifugal pump that won’t quit? Whether you need a single replacement or a complete skid system, MultiTorque is your trusted partner.

📞 Call us at 1300 726 525
📧 Email: sales@multitorque.com
🌐 Visit our website
🔗 Connect on LinkedIn

Sludge management is one of the toughest challenges in industrial operations—thick, abrasive, and often corrosive, sludge requires a pump that won’t quit under pressure. That’s where an industrial sludge pump comes in.

From wastewater treatment to mining and food processing, industrial sludge pumps are essential for moving semi-solid materials efficiently and reliably. At MultiTorque, we supply and service robust sludge pumps designed for Australia’s harshest environments.

🔗 Visit MultiTorque Homepage
🔗 Connect with us on LinkedIn

What Is an Industrial Sludge Pump?

An industrial sludge pump is a heavy-duty pump designed to handle thick, viscous, and abrasive fluids containing solids—commonly referred to as “sludge.” Unlike clean water or light chemicals, sludge presents unique challenges including:

High solid content
Variable viscosity
Corrosive or chemically reactive components
High wear and tear on pump components

Industrial sludge pumps are specifically engineered to withstand these factors, making them a critical component in sectors like mining, wastewater treatment, agriculture, and industrial processing.

Common Types of Industrial Sludge Pumps

At MultiTorque, we supply a variety of sludge pumps to meet different industrial needs. Each type offers unique benefits depending on the application.

🌀 Progressive Cavity Pumps

Ideal for handling viscous sludge and shear-sensitive fluids
Low pulsation and gentle transfer
Self-priming and suitable for variable flow conditions
Widely used in wastewater, oil, and chemical industries

🔁 Peristaltic (Hose) Pumps

No internal valves or seals—excellent for abrasive sludge
Self-priming and dry-run capable
Easy to clean and maintain
Common in chemical dosing and food waste applications

💨 Air Operated Double Diaphragm (AODD) Pumps

Excellent for portable or intermittent use
Handles thick sludges and slurries
Safe for explosive or hazardous areas
Popular in mining and remote site operations

🛠️ Submersible Sludge Pumps

Designed to be fully submerged
Ideal for pits, tanks, and confined spaces
Built with high wear-resistance for continuous duty

Where Are Industrial Sludge Pumps Used?

Sludge is produced in a wide range of industries—each with its own set of challenges. Here’s how industrial sludge pumps are applied across sectors:

Industry	Application Example
Mining	Tailings transfer, thickener underflow, slurry pumping
Wastewater Treatment	Sludge dewatering, grit removal, biosolid handling
Food Processing	Organic waste, mash transfer, high-viscosity fluids
Construction	Mud removal, excavation drainage, tunneling operations
Oil & Gas	Drilling mud, separator sludge, tank bottom cleanouts
Agriculture	Effluent pumping, manure handling, compost systems

At MultiTorque, we assess the specific needs of your operation—flow rate, solid content, pH levels, chemical compatibility—and recommend the right sludge pump for the job.

Key Features of a Good Industrial Sludge Pump

When dealing with sludge, not just any pump will do. Look for the following characteristics:

✅ Abrasion Resistance – Components like hardened impellers, ceramic linings, or elastomers protect against wear
✅ Seal Protection – Heavy-duty mechanical seals or seal-less designs reduce failure risk
✅ High Torque, Low Speed – Essential for pushing thick sludge without overheating or clogging
✅ Variable Flow Control – VSD compatibility allows for fine-tuned performance
✅ Easy Maintenance – Quick disassembly and spare part availability save valuable downtime

Custom Sludge Pump Systems from MultiTorque

Need a skid-mounted sludge pump with integrated controls? Or a trailer unit for mobile dewatering? We’ve got you covered.

Our in-house team of engineers and fabricators can build you a custom pumping solution, complete with:

Stainless steel pipework and housings
Explosion-proof motors (if required)
Variable speed drives and soft starters
Automated level and flow control systems
Telemetry for remote monitoring

Every site is different—and we tailor every system to match.

Maintenance & Servicing

Due to the aggressive nature of sludge, regular servicing is essential. MultiTorque offers:

🧰 Pump overhauls and rebuilds (in our Perth and Brisbane workshops)
🔁 Exchange programs to reduce lead times
🔍 On-site diagnostics and performance testing
📦 Genuine and aftermarket spare parts for major brands
🛡️ Preventative maintenance scheduling

We work with leading pump manufacturers including Netzsch, Wilden, Orbit, and more—backed by full support and documentation.

Why Choose MultiTorque?

We’re not just suppliers—we’re problem-solvers with real-world experience and a commitment to reliability.

🔧 15+ Years of Experience

We understand the harsh conditions of Australian industry and build pump systems to match.

🌏 National Coverage

With service hubs in Perth and Brisbane, we support operations across WA, QLD, and beyond.

⚙️ Custom Engineering

We don’t just sell pumps—we build systems that keep your plant flowing, no matter the conditions.

💬 Dedicated Support

From pre-sale consultation to after-sale servicing, we’re with you every step of the way.

Get a Sludge Pump That Gets the Job Done

If your current pump is struggling with blockages, leaks, or wear—it’s time to upgrade. Let MultiTorque help you spec, supply, and support a reliable industrial sludge pump built for your conditions.

📞 Call: 1300 726 525
📧 Email: sales@multitorque.com
🌐 www.multitorque.com.au
🔗 Follow us on LinkedIn

In industrial and commercial operations, the performance of your pump system directly affects your bottom line. From fluid transfer to wastewater management, dewatering to chemical processing—having the right equipment from trusted pumps companies is critical.

Australia is home to a number of reputable pump suppliers and service providers, but not all are created equal. That’s where MultiTorque stands out. With over 15 years of experience in the industry, we supply, service, and support high-quality pump systems across mining, agriculture, manufacturing, and energy sectors nationwide.

🔗 Visit MultiTorque Homepage
🔗 Connect with us on LinkedIn

What Do Pumps Companies Do?

Pumps companies specialize in the supply, installation, maintenance, and customization of pumping systems for industrial and commercial use. Their services typically include:

Supplying new pumps and spare parts
Rebuilding and servicing existing units
Designing custom pump skid systems
On-site diagnostics and breakdown response
Providing technical support and compliance documentation

Whether you need a centrifugal pump for clean water or a positive displacement pump for viscous fluids, experienced pump companies help ensure performance, safety, and long-term reliability.

Key Industries That Rely on Pump Suppliers

Pumps companies like MultiTorque serve a broad range of industries across Australia. Here are some key sectors that depend on reliable pumping systems:

Industry	Pump Applications
Mining	Dewatering, slurry handling, chemical dosing
Agriculture	Irrigation, fertigation, borehole pumping
Food Processing	Sanitary transfer, CIP systems, dairy pumps
Water Treatment	Sewage, stormwater, greywater management
Manufacturing	Cooling, fluid transfer, lubrication
Oil & Gas	Fuel transfer, chemical injection
Construction	Site drainage, dust suppression

Every sector presents unique challenges—from harsh environmental conditions to strict hygiene requirements. That’s why working with a knowledgeable pump partner is essential.

What Sets Great Pumps Companies Apart?

Choosing from a long list of pumps companies isn’t just about price. It’s about long-term performance, support, and trust. Here are key traits that define reliable pump suppliers:

✅ Product Range & Technical Knowledge

Reputable pump companies supply a variety of pump types including:

Centrifugal pumps
Progressing cavity pumps
Rotary lobe pumps
Air operated diaphragm (AODD) pumps
Submersible and borehole pumps
Pneumatic and hydraulic starters

At MultiTorque, we not only stock proven brands like Wilden, Orbit, Netzsch, and Inoxpa—we also know how to install and maintain them properly.

✅ Full Lifecycle Support

From site evaluation and product selection to installation, service, and parts replacement—your pump supplier should be a one-stop shop.

MultiTorque offers:

On-site pump assessments
Custom fabrication of skids and mobile trailers
Preventative maintenance programs
Exchange programs and rebuild services

✅ Industry Certifications and Standards

Top pump companies ensure their systems meet Australian compliance standards for hygiene, safety, and environmental impact—especially in food, chemical, and wastewater applications.

Why MultiTorque Is a Trusted Name in Australia

We’re not just another name in the long list of pumps companies—we’re a full-service provider with a reputation for quality, innovation, and customer-first service.

🛠️ Engineering Expertise

With over 15 years in the industry, our team brings technical know-how and hands-on experience to every job.

🚛 National Reach

With facilities in Perth and Brisbane, we serve clients across WA, QLD, NSW, VIC and beyond.

⚙️ Custom Solutions

From mining skids to borehole pump trailers, we design and build equipment tailored to your environment and duty cycle.

🧩 Flexible Support

Need a pump fast? Want a spare parts kit delivered? Need us to diagnose a failing pump on site? We’re ready to respond.

How to Choose the Right Pumps Company

When evaluating potential pump suppliers, consider the following checklist:

Do they understand your industry and fluid type?
Can they supply pumps rated for your flow and pressure requirements?
Do they offer servicing, rebuilds, and technical support?
Are their products compliant with local standards?
Do they have spare parts or exchange pumps in stock?

If any of the answers are “no”—it’s time to consider switching.

Examples of Custom Projects

At MultiTorque, we’ve successfully delivered hundreds of custom pumping solutions, including:

BoreBoss mobile borehole testing skid: A stainless steel hydraulic pump trailer for a WA mine site
Dewatering pump skids: Built for remote mining operations in Queensland
Sanitary lobe pump system: Designed for a dairy client requiring CIP compatibility
Air starter motor builds: Supplied for diesel engine start-up in offshore rigs and large industrial vehicles

These projects reflect our ability to integrate control panels, VSDs, pipework, filtration, and remote start systems—giving clients everything they need in a turnkey package.

Brands We Work With

We supply and support parts and pumps from leading international manufacturers, including:

Wilden (AODD pumps)
Orbit (progressive cavity pumps)
Netzsch (chemical & industrial pumps)
Inoxpa (food-grade & sanitary pumps)
Flowserve, Sulzer, Napco, and more

Whether you need OEM parts or a reliable aftermarket alternative, we’ve got it.

Get in Touch with a Pump Partner That Delivers

If you’re searching for pumps companies you can count on, look no further than MultiTorque. We bring the experience, inventory, and flexibility to support your operation—whether you need a single pump or a custom-built solution for your entire site.

📞 Call: 1300 726 525
📧 Email: sales@multitorque.com
🌐 www.multitorque.com.au
🔗 Follow MultiTorque on LinkedIn

When it comes to moving large volumes of water, slurries, or wastewater, few tools are as effective and reliable as an industrial submersible water pump. Built to operate directly in the fluid being pumped, these rugged units are essential for mining, construction, wastewater treatment, and flood control operations across Australia.

At MultiTorque, we supply and service high-performance industrial submersible pumps tailored for harsh, demanding environments. Whether you’re dewatering a mine site, managing stormwater runoff, or handling industrial effluent, we’ve got a pump that’s built to last.

🔗 Visit MultiTorque Homepage
🔗 Follow us on LinkedIn

What Is an Industrial Submersible Water Pump?

An industrial submersible water pump is a heavy-duty pumping unit designed to be fully submerged in the fluid it’s moving. Unlike surface pumps, submersibles push water up from within, using sealed motor technology that protects against liquid ingress and corrosion.

They are widely used for:

Dewatering underground mine sites and pits
Pumping slurry, wastewater, and process water
Emergency flood control
Construction site drainage
Sewage and effluent pumping
Agricultural water transfer and boreholes

Because the entire unit is submerged, these pumps offer quiet operation, strong suction, and reduced priming requirements.

Benefits of Industrial Submersible Water Pumps

Why choose a submersible over a traditional surface-mounted pump? Here’s what makes these units ideal for tough industrial tasks:

✅ Efficient Pumping from Depths
With no need to pull water up via suction, submersibles are far more efficient at handling deep-water applications.

✅ Self-Priming by Design
Submerged operation means no priming is required—saving time and reducing failure risks.

✅ Reduced Noise & Vibration
Perfect for noise-sensitive environments or operations near populated areas.

✅ Corrosion & Abrasion Resistant
Industrial-grade materials like stainless steel, cast iron, and polyurethane coatings allow for operation in aggressive fluids.

✅ Compact & Easy to Deploy
Portable models can be quickly dropped into pits, tanks, or excavations for fast water removal.

Common Types of Industrial Submersible Pumps

At MultiTorque, we supply a wide range of industrial submersible water pumps to match specific site conditions:

🟦 Drainage Submersible Pumps

Lightweight and compact
Ideal for clean or slightly dirty water
Used in construction, rainwater tanks, and portable dewatering

🟧 Slurry Submersible Pumps

Designed for abrasive solids and high-viscosity fluids
Features wear-resistant impellers and heavy-duty seals
Used in mining, tunneling, and dredging

🟥 Wastewater Submersible Pumps

Handles solids and fibrous materials
Used in sewage, effluent, and greywater systems
Common in wastewater treatment and food processing

⬛ Borehole Submersible Pumps

Long, narrow design for deep bore applications
Ideal for agricultural irrigation and remote site water supply
Energy-efficient and built for high-pressure output

Applications in Industrial Settings

Industrial submersible pumps are used in a wide range of applications across sectors in Australia:

Industry	Applications
Mining	Pit dewatering, tailings transfer, slurry pumping
Construction	Excavation drainage, rainwater removal
Municipal	Stormwater control, wastewater management
Agriculture	Borehole irrigation, tank transfer
Oil & Gas	Contaminated water handling, rig drainage
Food Processing	Washdown systems, greywater transfer

Each application requires a specific build and motor spec, which is why our team at MultiTorque provides tailored recommendations based on fluid properties, head height, and flow rate.

Key Features to Look For

When selecting an industrial submersible pump, consider the following:

Material Compatibility – Stainless steel for corrosive fluids; cast iron for durability
Impeller Type – Vortex, open channel, or semi-open depending on solids content
Power Requirements – Single-phase or three-phase motor
Flow & Head Rating – Match to system needs to avoid cavitation or burnout
Sealing System – Double mechanical seals or oil-filled chambers for protection
Portability – Lifting handles or integrated floats for ease of deployment

MultiTorque offers models from leading manufacturers and provides servicing to keep your system running without downtime.

Maintenance and Servicing

Like any critical equipment, industrial submersible pumps require regular care to perform at their best.

Our MultiTorque services include:

🧰 Full pump inspections and diagnostics
🔧 Repairs and overhauls (on-site or in our Perth and Brisbane workshops)
🔁 Exchange pumps to reduce downtime
🛠️ Spare parts sourcing for brands like Wilden, Orbit, Netzsch, and more
📋 Preventative maintenance scheduling and asset tracking

We ensure your pumps are compliant, efficient, and ready for whatever conditions your site throws at them.

Custom Solutions from MultiTorque

Need a submersible pump skid or fully integrated pumping system? We’ve got you covered.

We design and build:

Trailer-mounted submersible units
Solar-powered off-grid systems
Control panels with VSD integration
Level sensors and automatic float systems
Stainless steel or powder-coated enclosures for protection

Whether you’re working in remote WA mining regions or flood-prone Queensland areas, our team can engineer the ideal solution.

Why Choose MultiTorque?

💡 Expert Advice
Over 15 years of hands-on experience supplying industrial pump systems in Australia.

🛠️ Full Support
From selection and delivery to servicing and upgrades, we’ve got your back.

🚚 Fast National Delivery
Warehouses in Perth and Brisbane mean shorter lead times and local support.

🔗 Trusted Brands
We supply top-performing industrial submersible water pumps backed by warranties and ongoing support.

Get Pumped with MultiTorque

If your operation needs a tough, high-performance industrial submersible water pump, look no further than MultiTorque. From clean water to abrasive slurry, we’ll help you find the right pump to keep your site running smoothly.

📞 Call: 1300 726 525
📧 Email: sales@multitorque.com
🌐 Visit: www.multitorque.com.au
🔗 Connect with us on LinkedIn

Industrial Submersible Water Pumps

Newer Posts

Older Posts