Water Pump Skid Systems: Powerful Solutions From Multitorque 2025

In the harsh environments of Australian mining, agriculture, and civil construction, stationary equipment often isn’t an option. You need a pumping solution that’s mobile, durable, and ready to work on-site. That’s where a water pump skid comes in—an all-in-one powerhouse that combines reliability, transportability, and efficiency.

At MultiTorque, we specialise in designing, fabricating, and servicing custom-built water pump skid systems across Australia. Whether you’re pumping clean water, slurry, wastewater, or chemicals, we can engineer a solution that meets your exact flow and pressure requirements—no compromises.

Table of Contents

🔍 What Is a Water Pump Skid?

A water pump skid is a complete pumping unit built onto a steel skid base. It includes:

A water pump (centrifugal, progressive cavity, diaphragm, or other type)
A drive system (diesel engine, electric motor, or hydraulic)
Steel skid base with forklift pockets or lifting points
Hoses, valves, and optional onboard control panels

It’s designed for rapid deployment to job sites, offering stable operation without needing a concrete foundation or permanent install.

Whether used for dewatering, transfer, or emergency backup, these systems shine where fixed infrastructure fails.

🛠️ Applications of Water Pump Skid Units

At MultiTorque, we build pump skids tailored to real-world Australian conditions. Here’s where they’re most commonly deployed:

⛏️ Mining & Resources

Dewatering pits and sumps
Slurry and tailings transfer
Flood response and backup pumping

🚧 Civil Construction

Stormwater bypass
Trench and excavation pumping
Washdown and jetting applications

🚜 Agriculture

Irrigation system supply
Dam and tank water transfer
Fertigation and chemical dosing

🏭 Industrial & Utilities

Factory washdown stations
Fire water transfer
Process water handling

🧯 Emergency & Disaster Response

Mobile pump skids used by fire services and SES for:
- Flood cleanup
- Emergency water delivery
- Fire water support

🧩 Key Components of a MultiTorque Water Pump Skid

Our skids are never one-size-fits-all. Each is engineered to your project’s demands. Here’s what goes into a standard unit:

✅ 1. Pump Type

We supply and install pumps suited to your fluid and flow needs, including:

Centrifugal pumps for high-volume, low-viscosity transfer
Progressive cavity pumps for sludge and viscous fluids
Diaphragm pumps for solids and abrasive media
Self-priming options for shallow source draws

We work with trusted brands like Wilden, Orbit, Tsurumi, NOV, and Davey.

✅ 2. Drive System

Depending on site conditions, your skid can include:

Diesel engines (Kubota, Yanmar, Perkins) for remote or off-grid use
Electric motors (ABB, TECO) for permanent installations
Hydraulic drive options for specialised mobile plant integration

✅ 3. Skid Base

Each base is fabricated for strength, mobility, and field serviceability:

Galvanised, painted, or stainless steel
Forklift pockets, lifting lugs, and drainage slots
Optional wheel kits, trailer mountings, or vibration isolation mounts

✅ 4. Control & Safety Features

Systems can be equipped with:

Starter boxes or control panels
Pressure and flow gauges
VSD (variable speed drive) options
Low-level shutdowns
Remote telemetry (for high-tech sites)

✅ 5. Valving & Hose Assembly

We build units with the plumbing sorted:

Suction and discharge hose kits
Butterfly, ball, or non-return valves
Camlock fittings or custom quick-connects
Bypass lines and priming valves if required

⚙️ Fully Customisable Design

Every pump skid we build is purpose-engineered. You can choose:

Tank and hose reels on-board
Chemical-resistant materials for aggressive fluids
Sound-attenuated housings for low-noise zones
Solar or battery power integrations
Fire system compatibility

Just give us the problem—you’ll get a system built to solve it.

🌱 Benefits of a Skid-Mounted Water Pump

Compared to fixed systems, skid-mounted water pumps offer a wide range of advantages:

✅ Rapid Deployment

Move and operate from multiple job sites with no major infrastructure.

✅ Lower Setup Cost

No need for permanent installation or building permits—just drop it in place and go.

✅ Easier Maintenance

Everything is accessible. Swap parts, service engines, or inspect valves quickly without dismantling.

✅ Long-Term Durability

Skid frames protect the pump and keep everything anchored. Less wear, less damage.

✅ Scalability

Need more output later? Add more skid units or swap the pump/motor for larger capacity.

🔄 Pump Skid Repairs, Retrofits & Upgrades

If you already have a skid pump setup that’s underperforming or damaged, MultiTorque can overhaul it.

We offer:

Pump replacements and retrofits
Frame repairs or re-coating
Engine or motor upgrades
Hose/fitting replacements
Telemetry and control upgrades

We can also reverse-engineer legacy skids if drawings or specs are missing—just send photos or bring the unit in.

🛒 Why Choose MultiTorque?

We’re more than just a pump supplier—we’re Australia’s custom skid system specialists, combining fabrication, hydraulic know-how, and real-world field experience.

✅ Over 15 Years in Industry

We’ve supplied pump systems across WA, QLD, NSW, and beyond. We know what lasts and what fails in Aussie conditions.

✅ Built In-House

Our pump skids are built and tested in Perth and Brisbane. You’re dealing direct with the people building your gear.

✅ Full Lifecycle Support

From design, build, and testing through to commissioning, spares, and servicing—we’ve got your system covered.

✅ Quality Without the Fluff

We don’t load your quote with useless extras. Every part is selected for performance, safety, and serviceability.

✅ Fast Turnaround

Got an urgent job or a site emergency? We’ll work overtime to deliver a skid that gets you back in business.

🔗 Internal & Social Links

👉 Explore our full range of pump systems and industrial solutions:
🌐 www.multitorque.com.au

👉 Connect with us on LinkedIn to see builds, client stories & more:
🔗 MultiTorque on LinkedIn

⚠️ Choosing the Right Skid Pump: What to Consider

When planning your next water pump skid, consider:

What fluid are you pumping? (Water, slurry, chemicals?)
Required flow rate and head pressure?
Access to power on-site? (Diesel, electric, hydraulic?)
Environment: heat, dust, corrosives?
Do you need portability (forkliftable, trailer-mounted)?
Will the system need remote monitoring or automation?

We’ll guide you through these questions and ensure you get a solution that works—now and long-term.

📞 Let MultiTorque Build Your Custom Water Pump Skid

If your operation needs a high-performance, site-tough pump system that’s ready to roll, trust MultiTorque to build it.

Whether you need a 3” diesel dewatering pump skid or a multi-pump electric clean water booster station, we deliver gear that’s made for Aussie worksites—built tough, serviced locally.

📍 MultiTorque
📞 1300 726 525
📧 sales@multitorque.com
🌐 www.multitorque.com.au